CTi Automation Logo
Loading
Home | Contact Us | Sitemap
(800) 894-0412

WEG

Home   >   Products   >   WEG   >   Soft   >   Starters

WEG Soft Starters

(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

SSW-05: 0.75hp - 75hp

WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors.

Soft-Starters are electronic starters designed to accelerate, deccelerate and protect three-phase induction motors, controlling the voltage applied on the motor.

The SSW-05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been designed to supply an excellent performance during starting and stopping electric motors with excellent cost / benefit ratio.

The SSW-05 Plus Micro Soft-Starters are compact, optimizating the space in electrical panels and already incorporates all protections for the driven motor.

WEG SSW-05 Soft-Starters 0.75hp to 75hp Distributors
SSW-05 Series

If you are looking for WEG Soft Starters, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find SSW05 soft starter that you are looking for at the most competitive prices possible. If you are searching for SSW06 soft starter technical information (data-sheets) please use the datasheets or product selection guide page links.

SSW-06: 3hp to 2500hp

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 3 to 2500 hp.

SSW-06 Series Soft-Starter are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor.

With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure.

WEG Soft-Starter SSW-06 series, micro processed and full digital, are products with state-of-the-art technology and have been produced to ensure the best starting and stopping performance of induction motors, presenting themselves as a complete and low cost solution.

WEG SSW-06 Soft-Starter 3hp to 2500hp Distributor
SSW-06 Series

SSW-07: 6hp to 400hp

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 6 Hp to 400 Hp.

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors.The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop an electric motor smoothly.

The SSW07, with DSP (Digital Signal Processor) control was designed for high performance on motor starts and stops with an excellent cost-benefit ratio. Easy to set up, it simplifies start-up activities and daily operation.

The SSW07 is compact optimizing space in electric panels. It already incorporates electric motor protection. It adapts to customer needs through its easy-to-install optional accessories.

WEG SSW-07 Soft-Starters 6hp to 400hp Distributors
SSW-07 Series

GPH2: 5hp to 1200hp

The Combination Soft Starters is an industrial general purpose AC motor soft starter package and designed for simple and quick installation and start-up.

The Combination Soft Starter is an industrial general purpose AC motor soft starter package. It is designed for simple and quick installation and start-up, requiring only input power and output motor connections. It is available in NEMA 12, NEMA 3R, NEMA 4-Outdoor and NEMA 4-Indoor.

The Combination Soft Starter is built to complement the ruggedness and reliability of WEG motors,providing a complete, simple, and cost effective AC motor starting and protection solution.

Standard GPH2 panels are built with AC1 Run Rated Bypass and without the keypad in the door. All units are wall mounted except for the largest enclosure which includes a 12" floor kit standard.

WEG GPH2 Combination Soft Starter 5hp to 1200hp Distributor
GPH2 Series

SSW7000: 750 HP to 4500 HP

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The MV soft-starter WEG is available for power ratings from 750 HP up to 4500 HP. Voltage range: 2.3 kV - 6.9 kV.

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop an electric motor smoothly.

The SSW7000 is suitable for medium voltage motors. It reduces the voltage applied to the motor at start. As a consequence, motor current and torque is reduced for a smooth start. This eliminates impacts of inrush current on the power supply and impacts of mechanical shocks on the load and the coupling. This helps in reducing maintenance of bearings, couplings, gear boxes, pulleys, belts and chains, in addition to protecting the motor.

WEG SSW7000 Medium Voltage Soft-Starters 750 HP to 4500 HP Distributors
SSW7000 Series

Whether we have SSW07 soft starter in stock in Boise Idaho or need to ship direct from WEG to any USA cities; CTi Automation can get CFW10 drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some CFW10 inverter enabling us to further assist you in finding the correct CFW10 inverters in the USA, Canada, or Mexico. It will be very helpful if you have the CFW10 VFD part numbers ready, then our sales representatives can provide you with a pricing and availability quote for CFW10 drive that you are looking for in seconds. If you do not have the part numbers for CFW10 inverter, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

Motortronics Starters

This Heavy Duty Starter provides reduced voltage, stepless soft starting of 3-phase AC induction motors, protecting mechanical components from excessive torque stress and electrical systems from the effects of high motor inrush currents. The DXT Series includes advanced motor and load protection features just like those found in expensive motor protection relays. These include retentive thermal memory, dynamic reset capacity, true thermal modeling,

Saginaw Enclosures

Saginaw Control & Engineering, has been serving the electrical industry since 1963. We specialize in manufacturing both standard stock and custom designed enclosures as well as precision sheet metal fabrications. Our 265,000 square foot manufacturing facility, located in Saginaw, Michigan, uses state of the art fabricating equipment including the newest laser technology. All products are protected with the highest quality paint and powder finishes available