Toshiba Industrial Systems
Home > Products
> Toshiba Switchgear > Vacuum Contactors
|
400 Amp 2300-7200 Volts (Medium Voltage) The HCV-5HA, the first vacuum contactor produced in Houston, Texas,
was also the first Toshiba vacuum contactor to incorporate an electronic drive unit to power the operating coils. This solid
state design eliminated the economizing resistors and improved the reliability of the coil circuit.
The contactor is available in either electrically maintained or latched type version. The compact size and high
performance, as well as being available in a drawout design, has helped many OEMs and end-users replace old air-break contactors
and breakers.
|
 HCV-5HA & HCV-5HAL |
|
If you are looking for Toshiba Vacuum Contactors, please call us at (800) 894-0412 or email us
at info@ctiautomation.net we will do our
best to help you find the Toshiba Low Voltage Vacuum Contactor that you are looking for at the most competitive prices possible. If you
are searching for Toshiba Medium Voltage Vacuum Contactors technical information (data-sheets) please use the
Toshiba Vacuum Contactor Datasheets OR
Product Selection Guide page links.
|
|
720 Amp, 2300-7200 Volts (Medium Voltage) This 720-ampere contactor replaces Toshiba's CV461M-KAT(L) and
utilizes the latest vacuum and solid state technology developed by Toshiba. The HCV-6KA uses a solid state, electronic control
(drive unit), to operate the contactor.
The drive unit uses an electronic circuit, and any control voltage between 100V and 240V either AC or DC can be
used without changing the coil and/or other parts. The contactor is available in either electrically maintained or latched type
version. The HCV-6KA incorporates Toshiba's patented "Axial Magnetic Field Type Electrode" in the vacuum interrupters. This
special design results in higher current interruption and smaller size than any other comparable design of interrupters.
|
 HCV-6KALU & HCV-6KALU |
|
600 Amp, 208-1500 Volt / 720 Amp, 208-1500 Volt (Low Voltage) The HCV-1JBU is Toshiba's 3rd Generation
of 600A, low voltage vacuum contactor. With the HCV-1KAU, Toshiba offers the first true 720A, low voltage vacuum contactor
(it does not use parallel vacuum interrupters per phase).
The HCV-1KAU incorporates Toshiba's patented "Axial Magnetic Field Type Electrode" in the vacuum interrupters.
This special design results in higher current interruption and smaller size than any other design of interrupters. The HCV-1JBU
and HCV-1KAU contactors use a solid state, electronic control (drive unit), to operate the contactor. The drive unit uses an
electronic circuit, and any control voltage between 100V and 240V either AC or DC can be used without changing the coil and/or
other parts.
|
 HCV-1JBU & HCV-1KAU |
- CV-10HA & CV-10HAL for Motor Transformer Applications
- CV-10HB & CV-10HBL Capacitor Applications
HA(L)/HB(L) 320 Amp, 12/15KV This 12/15KV contactor is unique in the market and is going into many
applications where only vacuum circuit breakers were used in the past.
The CV-10H offers a product of lower cost, smaller size, and over 10 times the life over medium voltage
breakers. The HB model has been specially designed for capacitor switching, while the HA is for motor and transformer switching.
The CV-10 is available in non-latched or latched type version.
|
 CV-10 Series |
|
Whether we have HCV-5HA(L) Contactors in stock or need to ship direct from Toshiba Industrial Systems to any
USA cities; can get HCV-1JBU/1KAU Low Voltage Contactors to you fast and save you some money. Our Toshiba Industrial Systems
distributors warehouse stocks some HCV-6KA(L)U Medium Voltage Contactor products enabling us to further assist you in finding the
correct CV-10H Contactors in the USA, Canada, or Mexico. It will be very helpful if you have the JK Series OEM Power Cells part
numbers ready, then our sales representatives can provide you with a pricing and availability quote for Low Voltage Contactor that
you are looking for in seconds. If you do not have the part numbers for Toshiba Medium Voltage Contactors, our application engineers
will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
 |
|
|
Can't find a part number?
E-mail Us. |
ABB Contactor
The A-Line Contactor Range
has the same design from 9A to 1050A (AC3 duty) motor loads and is developed for a broad range of DC and other AC applications.
This makes it easier to match your needs with fewer components. This product has benefited of the latest research in electrical
design and component layout incorporating the most recent developments in safety aspects, materials and electronics.
|
Saginaw Enclosures
Thermoset Polyester Reinforced
with glass fiber, processed by injection molding, compression molding, pultrusion, and open molding are the material specifications
for Saginaw fiberglass enclosures. Fiberglass enclosures are used for interior or exterior applications, especially for exposure
to salt, corrosive agents, chemicals, or extremely wet areas. No additional finish is necessary.
|
|
|