(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

The Mount-Anywhere Gap and Crevice Free Wafer Style Magmeter is an excellent choice for high slurry concentrations, abrasive, adhesive, or corrosive applications. Toshiba's exclusive Float-N-Place ceramic liner has been specially designed to operate in severe slurry applications where a continuous slurry exposure could damage non-floating ceramic liners.

Toshiba's ceramic liner is specially mounted "inside" the flow tube and does not protrude to the outside of the body like conventional ceramic magmeters. This exclusive design virtually eliminates the possibility of breakage due to accidental bumping of the meter, rapid temperature changes, or over tightening of flanges. Compare Toshiba's Float-N-Place thermal shock specifications of 302 °F change in just 0.5 seconds to others that have stationary locked-in-place ceramic liners.

If you are looking for Toshiba Flowmeters, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Toshiba Mount-Anywhere Wafer LF414/LF600 that you are looking for at the most competitive prices possible. If you are searching for Toshiba Mount Anywhere Flanged LF434/LF602, LF434/LF600 technical information (data-sheets) please use the datasheets or product selection guide page links.

Toshiba's Mount-Anywhere Magmeter has saved thousands of customers thousands of dollars in installation cost by reducing or eliminating the cost of wiring, fence, labor, pipe, conduit and space. If you are short on space the Mount-Anywhere characterized coil technology allows flow measurement to better than 0.5% of rate accuracy only one diameter from the flange of an elbow, pump or valve in line sizes up to 24".

The Mount-Anywhere Magmeter is the world's first and only true flow, profile immune magmeter. There is no need to re-pipe the process or to design long straight runs ahead of time to ensure the magmeter will meet its published accuracy specification. The Mount-Anywhere Magmeter is ideal for use as a universal magmeter with its ability to be installed virtually anywhere in the plant.

The GF630PV Magnetic Flowmeter Premium Value Series is one of the greatest values in the magmeter market. It is economically priced yet loaded with features not found in many top-of-the-line conventional magmeters. The meter is built with Toshiba's reputation for high quality, and the detector has a 40-year MTBF rating using military specification (MIL-HDK-217F) standards.

What good is saving a few extra dollars on a low quality stripped down magmeter if the add-on cost and ownership cost can actually add thousands of dollars to the original price of the meter? Available in sizes from ½ inch to 24 inches. Liner materials are available: polyurethane, teflon and rubber.

The LF150 is a large meter-size detector with small and light-weight structure. Coil arrangement allows for uneven flow to be measured correctly. Combined with the separate LF230, which has an improved noise suppression circuit can provide superior signal processing capabilities. The flowmeter is highly resistant to noise and provides a stable output for fluids containing slurries. The LF150 ranges in size from 700mm - 3000mm (28" - 120").

The electromagnetic flowmeter uses Faraday's Law of Electromagnetic Induction to measure the process flow. The device consists of two units: a detector, through which the fluid to be measured flows and in which low level signals proportional to flow rates are obtained; and a converter, which supplies excitation current to the the detector and amplifies the signals from the detector and processes and converts the signals into the 4-20 mA dc current signal. Model LF450 is available as a remote or integrally mounted unit. It ranges in size from 500mm - 600 mm (20" - 24").

Most conventional sanitary magmeters are made from three or more pieces before it connects to your process piping. The more parts to a magnetic flow meter detector the greater the chance for bacteria to hide and grow. Toshiba's Gap-Free sanitary magmeter is designed as a single body piece eliminating the possibility of liquids solidifying in cracks or gaps in the unit. With the exception of electrodes from the input flow process connector to the outlet flow connector, there is only the Gap-Free detector body. The totally gap-free design eliminates gaps, cracks, crevices, flanges, screws, gaskets, matching body adapters and any other part that would allow bacteria to collect.

The unibody design not only prevents trapping of particles but also provides for fast and easy cleaning on both the inside and outside of the meter. Toshiba's Gap-Free Magmeter is also available in a sanitary capacitance electrodeless model for the ultimate in total-gap and crevice-free design.

The LF470 is a micro fractional detector designed to measure a small amount of fluid containing substance such as chemicals. The wetted materials for the LF470 are corrosion-resistant ceramic and platinum electrodes and are compatible with a wide range of fluids. The LF470 is a lightweight palm-sized detector and can be mounted with a LF602 converter. The lineup of LF470 are 2.5mm (1/10 inch), 4mm (1/6 inch), and 6mm (1/4 inch).

The LF510 flowmeter has exclusive 0.01 µS/cm ultra low conductivity specification on flows up to 9.84 ft/s for normal or ultra low conductivity service. The LF510 is a gap and crevice free capacitance sanitary magmeter. It is an excellent choice for ultra low conductivity, high slurry concentrations, abrasive, adhesive, or corrosive applications. Toshiba's exclusive Float-N-Place ceramic liner has been specially designed to operate in severe slurry applications where a continuous slurry exposure could damage non-floating ceramic liners.

Toshiba's ceramic liner is specially mounted "inside" the flow tube and does not protrude to the outside of the body like conventional ceramic magmeters. This exclusive design virtually eliminates any possibility of breakage due to accidental bumping of the meter or rapid temperature changes during CIP or SIP conditions. Compare Toshiba's Float-N-Place thermal shock specifications of 302 °F change in just 0.5 seconds to other stationary locked-in-place liners.

The LF510 Servere Service Magmeter is unquestionably one of the toughest and best performing industrial magmeters in the world today. Its extraordinary tough performance specifications make it the prefect choice for the really harsh and nasty industrial applications. Its exclusive electrodeless Float-N-Place alumina ceramic liner gives it the highest abrasion, corrosion, adhesion, and thermal shock performance specifications on the market. Looking for the lowest conductivity magmeter specifications on the market? The LF510 has an ultra low conductivity specification of 0.01µS/cm on flows up to 9.84 ft/s allowing it to work in applications where other low conductivity meters would fail.

Toshiba's ceramic liner is specially mounted "inside" the flow tube (Float-N-Place) and does not protrude to the outside of the body like conventional ceramic magmeters. This exclusive float-inside-the-body design virtually eliminates any possibility of breakage due to accidental bumping of the meter or rapid temperature changes since the ceramic liner is not constrained by flanges. Compare Toshiba's Float-N-Place thermal shock specifications of 302 °F change in just 0.5 seconds to other stationary locked-in-place liners.

The LF502 is a magmeter for partially-filled pipes. This magmeter has an improved functional magnetic field distribution technique enabling a high-precision flow measurement from low-level to fully-filled flow conditions. In addition to these characteristics, the LF502 does not allow mud, sands, and other solid sediment to stay at the bottom of the detector pipe and is unaffected by wave or floating solids on the fluid surface.

The LF502 also has unique structures such as the positioning of the electrodes, thus eliminating unnecessary piping work such as lifting the downstream pipe section to fill the detector pipe. The lineup of LF502 are 150mm(6 inch), 200mm(8 inch), 250mm(10inch), 300mm(12 inch), 350mm(14 inch), 400mm(16 inch), 500mm(20 inch), and 600mm(24 inch).

Whether we have Toshiba Magmeters in stock or need to ship direct from Toshiba Industrial Systems to any USA cities CTi Automation can get Mount-Anywhere Flow Meters to you fast and save you some money. Our Toshiba Industrial Systems distributors warehouse stocks some Partially Filled LF502 Electromagnetic Flowmeter products enabling us to further assist you in finding the correct Capacitance Severe Service Magmeter in the USA, Canada, or Mexico. It will be very helpful if you have the Toshiba Flow Meter part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Fractional LF470 Electromagnetic Flowmeters that you are looking for in seconds. If you do not have the part numbers for Toshiba Magmeters, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.