(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Saginaw Control and Engineering's Industrial Modular System Enclosures (IMS) are designed to house electrical and electronic controls, instruments and components, with integrated mounting channels in the top and bottom of the enclosure and grid mounting options making this product more flexible and easier to work with. These enclosures are primarily for use in an indoor environment to protect against dust, dropping of non-corrosive liquids and light splashing of water.

Product Attributes

• White powder coat finish inside and out.
• Easily interconnected and interlocked.
• Easy to install mounting panels with increased available space.
• Subpanels can be installed at any depth of the enclosure.
• SCE exclusive concealed hinges, making doors easy to remove and interchange.
• SCE heavy duty three point padlocking handles.
• Flange trough collar around all door openings.
• A hinged slave door is provided on Disconnect Enclosures for unobstructed access to the insde of the enclosure.
• Grid mounting available to take full advantage of internal space.

Product Overview

• Type 12 IMS Single Door Enclosures
• Type 12 IMS Two Door Enclosures
• Type 12 IMS Single Door Enclosure w/ Slave Door Disconnect
• Type 12 IMS two Door Enclosure w/ Slave Door Disconnect
• End Plate
• Plinth Base
• Galvanized Sub Panel
• Galvanized Filler Plates
• Sub-Panel Mounting Strap
• Top-End Mounting Grid
• End Mounting Grid
• Filler Mounting Grid
• Horizontal Mounting Grid
• Grid Mounting Angle
• Vertical Mounting Grid
• Floor Mounting Angles
• Dead Front/Swing Panel
• U-Shape Rack Angles
• L - Shape Rack Angles
• Nut Retainer 10-32
• Nut Retainer 1/4-20 Nut
• Channel Nuts 1/4-20
• Channel Nuts
• Main Single Door Mechanical Interlock
• Main Two Door Mechanical Interlock
• Slave Door Mechanical Interlock IMS
• IMS Bolt Pack

If you are looking for Saginaw Type 12 IMS Enclosures, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find Saginaw Control Industrial Modular Enclosures that you are looking for at the lowest prices possible. If you are searching for Saginaw NEMA 12 IMS Enclosure technical information (data-sheets) please use the Saginaw Datasheets OR Product Selection Guide page links.

Finish of the enclosures is powder coated white inside and out. Saginaw NEMA 12 IMS Enclosures support the following industry protection standards NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC 60529 IP 55.

Whether we have Saginaw Enclosures in stock in or need to ship direct from Saginaw Controls & Engineering to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get Saginaw NEMA 12 Industrial Modular Enclosures to you fast and save you some money.

Our Saginaw Controls distributors warehouse stocks some SCE products enabling us to further assist you in finding the correct Saginaw Type 12 IMS Enclosures in the USA, Canada, or Mexico. It will be very helpful if you have the Saginaw NEMA 12 IMS Enclosures part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Saginaw Control & Engineering products that you are looking for in seconds. If you do not have the part numbers for Saginaw Industrial Modular Enclosures, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.