Low Voltage AC Digital Solid State Soft Starters
Motortronics low voltage soft starters offer controlled starting of AC induction or synchronous motors
reducing mechanical stress on the motor and shaft.
- Input voltage range 208 ~ 600VAC
- Power range up to 1200HP (1250A)
- Three series
- VMX Compact, Standard & Heavy Duty
- DXT Advanced
- XLD Legacy
Low Voltage Soft Starts
If you are looking for Motortronics Soft Starters, please call us at (800) 894-0412 or Email us
at firstname.lastname@example.org we will do our best to help you
find the Motortronics AC Drives that you are looking for at the most competitive prices. If you are searching for Motortronics
Electronic Motor Brakes technical information (data-sheets) please use the
Phasetronics Datasheets OR
Product Selection Guide page links.
MVC Plus Series Medium Voltage
The MVC Plus Medium Voltage Series Soft Starter is designed to start AC motors in any fixed speed
application. It provides maximum protection with "True Thermal Modeling," while allowing smooth, stepless control of
acceleration and deceleration. The MVC Plus Series guarantees power control and protection for your most important assets.
Motor and starter protection is taken to a new level by combining a high-end motor protection relay with a
heavy duty solid state starter. Flexible control features and selectable ramping profiles to match any application - no need to
compromise performance. High level circuit isolation via fiber optics (standard on all units) for safety and power quality
immunity. Sealed NEMA 12 enclosures are standard equipment, not an expensive option. Soft start & protect any AC motor. The
MVC Plus Series starter is designed to start AC motors in any fixed speed application. It provides maximum protection with "True
Thermal Modeling," while allowing smooth, stepless control of acceleration and deceleration. The MVC Plus Series guarantees power
control and protection for your most important assets.
Medium Voltage Starter
Motortronics AC Drives offer precise speed and torque control of AC induction motors for any level of
application ranging from simple fan or pump control to precise winder control.
- Input voltage range 200 ~ 480Vac
- Power range up to 800HP
- Three series
- ME2 Micro
- VCM V/hz or Sensorless Vector
- MT High Performance Constant Torque
ABC Series Electronic Motor Brakes
Electronic braking stops the load by injecting a controlled amount of DC current into a three phase AC motor.
The ABC Series "automatic braking controller" features full-wave DC braking which can be adjusted to stop your load quickly,
repeatably and reliably, even if load conditions change. The ABC Series meets the three main objectives that are important in
every industry: Maximized Safety, Increased Productivity and Maintenance-Free Operation.
The ABC Series is designed to eliminate dangerous coast-to-stop times of rotating machines and equipment. The
ABC Series also eliminates the dangerous practice of jamming the machine to bring it to a stop, which can present potential danger
to operators and passers-by alike. OSHA and other safety agencies pay close attention to these types of operating conditions and
recognize brakes as an important part of a system to guard against potential dangers.
Motor Protection/Overload Relays
Take your motor protection to a new level. The RX Series provides more than just solid state overload or power
protection relays. By using features previously found only in large expensive Motor Protection Relays, the RX Series allows even
small to medium sized motor applications to be protected by the best technology available, yet at a price affordable to all.
The TE-RTD12 Relay device adds advanced RTD (Resistor Temperature Detector) and differential current monitoring
capability to your new or existing motor system. The TE-RTD12 Relay device offers 12 built-in RTD inputs, 3 programmable output
relays (5A), 2 isolated analog inputs (4-20mA), 1 isolated analog output (4-20mA), 3 isolated digital inputs, and differential
current feedback monitoring.
Motor Protection Relays
- Current Transformer - Ansi Rated Window Type
- Current Transformer - Non-Ansi Rated Window Type
- Low Voltage Transformer
- Medium Voltage Transformers
Non-Latching (C) - uses constant-on electromagnetic coils to close, and hold closed the vacuum bottle
contacts. When the power to the electromagnetic coil is removed, the vacuum chamber contacts spring open (termed as;
electrically held contacts or non-latching contacts).
Latching (CJ) - uses separate coils and mechanisms to both close and open the vacuum bottle contacts
(termed as; mechanically held or latching, contacts).
Motor Winding Heater Controls
Even the best motor winding insulation materials become water permeable with repeated exposure to temperature
extremes and moisture. If the ambient temperature is below the "dew point" when a motor is turned off, condensation will form
inside the motor as it cools down. When the motor is re-energized, the moisture heats up and permeates the windings, eventually
shorting and damaging the motor. Airborne corrosive elements like salt and chemicals can also combine with condensation and erode
the rotor and bearings, leading to premature motor failure.
The MWH Series provides a cost effective solution to these problems by preventing condensation build-up in
motors. By applying a low level current to the motor windings during extended shut down periods, the MWH Series keeps AC motors
warm and moisture-free.
Motor Winding Heater
VirtualSCADA VS2 for Soft Starters, AC Drives & Motor Protection Relays
VirtualSCADA VS2-MT for Motortronics Soft Starters, AC Drives and Motor Protection Relays gives users the
ability to connect a Modbus/TCP master (e.g.PLC system) to one or more Soft Starters, Motor Protection Relays or AC Drives. The
transparent VirtualSCADA VS2 gateway will act as a Modbus/TCP slave on an Ethernet network, transform the queries to the Serial
Modbus network and send back the response to the Modbus/TCP master. The VirtualSCADA VS2 can be setup in a matter of minutes. Turn
key and Ready to Use. No additional setup or programming is required.
VirtualSCADA VS2-MT Modbus/TCP Gateways
Whether we have Motortronics Overload Relays in stock in or need to ship direct from Phasetronics to any USA
cities; CTi Automation can get Motortronics Solid State Starters to you fast and save you some money. Our Phasetronics
distributors warehouse stocks some Motortronics products enabling us to further assist you in finding the correct Motortronics
AC Drives in the USA, Canada, or Mexico. It will be very helpful if you have the Motortronics Contactor part numbers ready, then
our sales representatives can provide you with a pricing and availability quote for Motortronics Electronic Brakes that you are
looking for in seconds. If you do not have the part numbers for Motortronics Transformer, our application engineers will be able
to help you figure out the part numbers and get the price quote to you as soon as possible.