(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

ST722B Series (Back Mount) Terminal Blocks

• 300 Volts (UL 1059 Class B and C)
• 175 Amps
• Wire Range #2/0 - #8
• (Accommodates Two Hole Compression Lugs on .625" Centers - wires #2 and larger may require narrow lugs)
• Base, Thermoplastic, 125°C (UL RTI)
• Studs, Brass, Nickel Plated
• 2 - 6 Poles
• .73" Centers
• Application Torque: 35 lbf-in for #10 - 32 and M5. 50 lbf-in for 1/4" - 20 and M6
• The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
• CE Mark

If you are looking for Marathon Studded Power Feed Thru Terminal Blocks, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Marathon Studded Power Feed Thru Terminals that you are looking for at the lowest prices possible. If you are searching for Marathon Studded Power Feed Thru Terminal Blocks technical information (data-sheets) please use the Marathon Datasheets OR Product Selection Guide page links.

ST722S Series (Slide Mount) Terminal Blocks

• 300 Volts (UL 1059 Class B and C)
• 175 Amps
• Wire Range #2/0 - #8
• (Accommodates Two Hole Compression Lugs on .625" Centers - wires #2 and larger may require narrow lugs)
• Base, Thermoplastic, 125°C (UL RTI)
• Studs, Brass, Nickel Plated
• 1 - 4 Poles
• .73" Centers
• Application Torque: 35 lbf-in for #10 - 32 and M5. 50 lbf-in for 1/4" - 20 and M6
• The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
• CE Mark

ST722E Series (End Mount) Terminal Blocks

• 300 Volts (UL 1059 Class B and C)
• 175 Amps
• Wire Range #2/0 - #8
• (Accommodates Two Hole Compression Lugs on .625" Centers - wires #2 and larger may require narrow lugs)
• Base, Thermoplastic, 125°C (UL RTI)
• Studs, Brass, Nickel Plated
• 1 - 6 Poles
• .73" Centers
• Application Torque: 35 lbf-in for #10 - 32 and M5. 50 lbf-in for 1/4" - 20 and M6
• The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application
• UL Recognized File No. XCFR2.E62806
• CSA Certified File No. LR19766
• CE Mark

ST723B38 Series (Back Mount) Terminal Blocks

• Base, Thermoplastic, 125°C (UL RTI)
• Flammability, UL 94 V-O
• Studs, 3/8" - 16 Brass, Nickel Plated
• Mounting hardware included (4) #10-32 screws
• Lug termination hardware not included
• Application Torque 192 lb-in.
• UL Recognized File No. XCFR2.E62806
• cUR Certified File No. XCFR8.E62806
• 600 Volts (UL 1059 Class B and C)
• 380 Amps
• Wire Range #500 kcmil - #2/0 AWG
• (Accommodates Two Hole Compression Lugs on 1" Centers - wires larger than 250 kcmil require narrow lugs)
• CE Mark

ST715S1902 Series Terminal Blocks

• 300 Volts (UL 1059 Class B and C)
• 80 Amps
• Wire Range #6 - #14
• (Accommodates Two Hole Compression Lugs on .625" Centers)
• Base, Thermoplastic, 125°C (UL RTI)
• Studs, Brass, Nickel Plated
• 2 Poles
• .56" Centers
• Application Torque 35 lbf-in
• The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application
• UL Recognized File No. XCFR2.E62806
• cUR Certified File No. XCFR8.E62806
• CE Mark

Our Marathon Special Products distributors warehouse in Boise, Idaho USA stocks some Marathon products (Marathon Studded Power Feed Thru Terminal Blocks ST722B Back-Mount ST722S Slide Mount ST722E End-Mount ST723 ST715 Series Terminals Distributors) enabling us to further assist you in finding the correct Marathon Studded Power Feed Through Terminal Blocks in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have Marathon Studded Power Feed Thru Terminal Blocks in stock in or need to ship direct from Marathon to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get Marathon Studded Power Feed Through Terminal Blocks to you fast and save you some money!

It will be very helpful if you have the Marathon Studded Power Feed Thru Terminal Blocks part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Marathon Studded Power Feed Through Terminals that you are looking for in seconds. If you do not have the part numbers for Marathon Studded Power Feed Thru Terminal Blocks, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us!