Marathon Double Row Terminal Blocks | Series 100 200 300 400 410 600A 800A 601 801 602 802 603 604 605 621 670A 671 672

Home

Contact Us

Sitemap

(800) 894-0412

Marathon Special Products

Home > Products > Marathon > Double Row Terminal Blocks

(800) 894-0412 (888) 723-4773 (Fax)
info@ctiautomation.net

100 Series Kulka 670A GP Series 3/8" Center Lines, Closed Back 150 Volt, 20 Amp Base, General Purpose Phenolic, 150°C Closed Back Design Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-36 Poles 3/8" Centers Wire Range With Wire Binding Screw #12-#22 AWG - 20 Amps Wire Range With Sems Pressure Screw #18-#22 AWG Stranded Copper Wire Only, 150 Volts 15 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E62806 CSA Certified File No. LR19766 CE Mark	Marathon 100 Series Double Row Terminals
If you are looking for Marathon Double Row Terminal Blocks, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Marathon Double Row Terminals that you are looking for at the most competitive prices possible. If you are searching for Marathon Kulka Series Double Row Terminal Block technical information (data-sheets) please use the Marathon Double Row Terminal Datasheets OR Product Selection Guide page links.
200 Series Kulka 671 GP Series 7/16" Center Lines, Closed Back 300 Volt, 20 Amp Base, General Purpose Phenolic, 150°C Closed Back Design Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-30 Poles 7/16" Centers Wire Range With Wire Binding Screw #12-#22 AWG - 20 Amps Wire Range With Sems Pressure Screw #12-#22 AWG Stranded Copper Wire Only, 20 Amps Will Accommodate Lugs For Wire Sizes #10-#16 AWG - 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E62806 CSA Certified File No. LR19766 CE Mark	Marathon 200 Series Double Row Terminals
200 HB Series (High Barrier) 7/16" Center Lines, Closed Back 600 Volt, 20 Amp Base, General Purpose Phenolic, 150° C Closed Back Design Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-30 Poles 7/16" Centers Wire Range With Wire Binding Screw #12-#22 AWG - 20 Amps Wire Range With Sems Pressure Screw #12-#22 AWG Stranded Copper Wire Only, 20 Amps Will Accommodate Lugs For Wire Sizes #10-#16 AWG - 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E62806 CSA Certified File No. LR19766 CE Mark	Marathon 200 HB Series High Barrier Double Row Terminals
300 Series Kulka 672 GP Series 9/16" Center Lines, Closed Back 600 Volt, 30 Amp Base, General Purpose Phenolic, 150°C Closed Back Design Screws, #8-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-24 Poles 9/16" Centers Wire Range with Wire Binding Screw # 10 - #14 AWG - 30 Amps Wire Range with Sems Pressure Screw #10 - #22 AWG Stranded Copper Wire Only, 30 Amps Will Accommodate Lugs for Wire Sizes #10 - #16 AWG - 30 Amps The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. XCFR2.E62806 CSA Certified File No. LR19766 CE Mark	Marathon 300 Series Double Row Terminals
400 Series 11/16" Center Lines, Closed Back 600 Volt, 30 Amp Base, General Purpose Phenolic, 150°C Closed Back Design Screws, #10-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-12 Poles 11/16" Centers Wire Range With Wire Binding Screw #10-#22 AWG - 30 Amps Wire Range With Sems Pressure Screw #10-#22 AWG Stranded Copper Wire Only, 30 Amps Will Accommodate Lugs For Wire Sizes #6-#16 AWG - 65 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E62806 CSA Certified File No. LR19766 CE Mark	Marathon 400 Series Double Row Terminals
Kulka 410 GP Series 1/4" Center Lines, Open Back 300 Volt, 5 Amp Base, Phenolic, 150°C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-30F) Material Available Screws, #2-56 X 7/32 Binder Head, Phil-Slot, Brass Terminals, Plated Brass 1-23 Poles 1/4" Centers Wire Range With Wire Binding Screw #18-#20 AWG - 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 410GP Series Double Row Terminals
Kulka 600 GP Series 3/8" Center Lines, Open Back 300 Volt, 15 Amp Base, Phenolic, 150°C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #5-40 Binder Head, Phil-Slot, Brass Terminals, Plated Brass 1-22 Poles The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 3/8" Centers Wire Range With Wire Binding Screw #12-#22 AWG - 15 Amps UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 600GP Series Double Row Terminals
Kulka 600A/800A GP Series 3/8" Center Lines, Open Back 300 Volt, 15 Amp Base, Phenolic, 150°C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-22 Poles The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 3/8" Centers Wire Range With Wire Binding Screw #12-#22 AWG - 15 Amps 800A Series (Riveted KTs) UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 600A/800A Double Row Terminals
Kulka 601/801 GP Series 7/16" Center Lines, Open Back 300 Volt, 20 Amp Base, General Purpose Phenolic, 150°C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-23 Poles 7/16" Centers Wire Range With Wire Binding Screw #12-#22 AWG - 20 Amps Will Accommodate Lugs For Wire Sizes #10-#16 AWG - 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 801 Series (Riveted KTs) UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 601/801 Double Row Terminals
Kulka 602/802 GP Series 9/16" Center Lines, Open Back 300 Volt, 30 Amp Base, General Purpose Phenolic, 150°C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #8-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-26 Poles 9/16" Centers Wire Range With Wire Binding Screw #12-#14 AWG - 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 802 Series (Riveted KTs) UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 602/802 Double Row Terminals
Kulka 603 GP Series 11/16" Center Lines, Open Back 600 Volt, 50 Amp Base, General Purpose Phenolic, 150°C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #10-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-12 Poles 11/16" Centers Wire Range With Wire Binding Screw #10-#12 AWG - 50 Amps Will Accommodate Lugs For Wire Sizes #6-#16 AWG - 65 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 603 GP Double Row Terminals
Kulka 604 GP Series 7/8" Center Lines, Open Back 600 Volt, 70 Amp Base, General Purpose Phenolic, 150°C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #12-32 Binder Head, Phil-Slot, Brass Terminals, Plated Brass 1-8 Poles 7/8" Centers Wire Range With Wire Binding Screw #4-#12 AWG - 70 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 604 GP Double Row Terminals
Kulka 605 GP Series 1 1/8" Center Lines, Open Back 600 Volt, 90 Amp Base, General Purpose Phenolic, 150°C JJ (GDI-30F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #1/4-28 Binder Head, Slotted, Brass Terminals, Plated Brass 1-6 Poles 1-1/8" Centers Wire Range With Wire Binding Screw #2-#12 AWG - 90 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 605 GP Double Row Terminals
Kulka 621 RZ Series 7/16" Center Lines, Closed Back 600 Volt, 20 Amp Base, Thermoplastic, 125°C (U.L. RTI) Closed Back Design Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-30 Poles 7/16" Centers The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Wire Range With Wire Binding Screw #12-#22 AWG - 20 Amps Wire Range With Sems Pressure Screw #12-#22 AWG Stranded Copper Wire Only - 20 Amps UL Recognized File No. XCFR2.E62806 CSA Certified File No. LR19766 CE Mark	Marathon 621 RZ Double Row Terminals
Kulka 670A RZ Series 3/8" Center Lines, Closed Back 300 Volt, 20 Amp Base, Thermoplastic, 130°C (U.L. RTI) Closed Back Design Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-30 Poles 3/8" Centers The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Wire Range With Wire Binding Screw #12-#22 AWG - 20 Amps Wire Range With Sems Pressure Screw #14-#22 AWG Stranded Or Solid Wire (Cat. Designation 3865) UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 670A RZ Double Row Terminals
Kulka 671 RZ Series 7/16" Center Lines, Closed Back 300 Volt, 20 Amp Base, Thermoplastic, 125°C (U.L. RTI) Closed Back Design Screws, #6-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-30 Poles 7/16" Centers The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Wire Range With Wire Binding Screw #12-#22 AWG - 20 Amps Wire Range With Sems Pressure Screw #12-#22 AWG Stranded Copper Wire Only - 20 Amps Will Accommodate Lugs For Wire Sizes #10-#16 AWG - 30 Amps UL Recognized File No. XCFR2.E62806 CSA Certified File No. LR19766 CE Mark	Marathon 671 RZ Double Row Terminals
Kulka 672 RZ Series 9/16" Center Lines, Closed Back 600 Volt, 30 Amp Base, Thermoplastic, 125°C (U.L. RTI) Closed Back Design Screws, #8-32 Binder Head, Phil-Slot, Steel Terminals, Plated Brass 1-24 Poles 9/16" Centers Wire Range With Wire Binding Screw #10-#14 AWG - 30 Amps Wire Range With Sems Pressure Screw #10-#22 AWG Stranded Copper Wire Only - 30 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR2.E47811 CSA Certified File No. LR19766 CE Mark	Marathon 672 RZ Double Row Terminals
Our Marathon Special Products distributors warehouse in Boise, Idaho USA stocks some Marathon products enabling us to further assist you in finding the correct Marathon Double Row Terminals in the USA, Canada and Mexico. Whether we have Marathon Double Row Terminal Blocks in stock in or need to ship direct from Marathon to any USA cities; CTi Automation can get Marathon Terminal Blocks to you fast and save you some money! It will be very helpful if you have the Marathon Terminals part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Marathon Double Row Terminals that you are looking for in seconds. If you do not have the part numbers for Marathon Double Row Terminal Blocks, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us!

AC Tech Drives

The Input Voltage must match the nameplate voltage rating of the drive. Voltage fluctuation must not vary by greater than 10% overvoltage or 15% undervoltage. The SCD drive is suitable for use on a circuit capable of delivering not more than 5,000 RMS symmetrical amperes at 5 HP (3.7 kW) and below, and 18,000 RMS symmetrical amperes at 7.5 - 25 HP (5.5 - 18.5 kW), at the drive's rated voltage.

Weidmuller Terminals

The P-Series is Weidmüller's new generation of modular terminals distinguished by concise yet uniquely flexible portfolio. The cornerstones of this concept is the "Push In" connection technology which enable a reduction in the terminal variants whilst providing incredible cost savings. Save space by connecting with these multi-tier terminals with PUSH IN connection technology.