(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

The AS-i Safety Monitor, the ASM1, is a core component of the AS-Interface Safety at Work system. Using configuration software it monitors the safety-related bus participants that are assigned to it, e.g. command devices, Multiple Light Beam Safety Devices and Safety Switches.

The Safety Monitor has an RS 232 diagnostics interface for the PC-supported configuration and diagnostics. Logical links can be easily created with the graphic user interface of the® based software. The user can combine safety sensors and command devices with a mouse click and assign different release circuits for switching off the dangerous movement. Depending on the device type, two dependent or independent release circuits with configurable contactor monitoring are available.

With an extended scope of functions, the ASM1E device type provides even more convenience with the configuration and diagnostics of a safety application monitored via an AS-Interface. Besides additional logic and diagnostics functions, ASM1E also has an activation/deactivation mode for parameterized software modules. The machine manufacturer can therefore already prepare the configuration of the Safety Monitor in the preliminary stage for all safety sensors that could be used with an extension.

If you are looking for Leuze AS-i Safety Products, please call us at (800) 894-0412 or Email us at info@ctiautomation.net we will do our best to help you find the Leuze Lumiflex AS-Interface Products that you are looking for at the most competitive prices possible. If you are searching for Leuze AS-i Coupler Module technical information (data-sheets) please use the Leuze Safety Monitor Datasheets OR Product Selection Guide page links.

The ASM2E Safety Monitor has all the functionalities and features of the ASM1E Safety Monitor. Several safety-related actuators, such as drives or valve modules, can be monitored and safely switched simultaneously with just one ASM2E Safety Monitor.

• Safety-related control of safe AS-i actuators with same safe AS-i address
• Higher level start and emergency STOP functions with safety-related coupling of adjacent AS-i networks
• Help signals for start/restart interlock status
• AS-i actuator error restart
• Additionally: All ASM1E Safety Monitor functions and features are provided

The ASKM1 safe coupling module allows electro-mechanical safety sensors with contact-based outputs, such as E-STOP command devices or Safety Switches, as well as Safety Light Curtains with relay outputs to be easily connected to the AS-Interface. The ASKM1 converts the sensor signals into data words and provides these for forwarding via AS-Interface. The transferal of data and power is performed simultaneously via the unshielded AS-i flat cable.

• Safe AS-Interface bus participant for connecting 1 or 2 electro-mechanical sensors
• LED displays: AS-i status, inputs
• AS-Interface addressing via integrated addressing port
• Simple network connection with AS-i penetration technology
• Mounting plate for DIN rails and screwed mounting

The ASKM2 coupling module allows SOLID 2 und SOLID-4E Safety Light Curtains to be easily connected to AS-Interface networks. The ASKM2 converts the sensor signals into data words and provides these for forwarding via AS-Interface. The transferal of data and power is performed simultaneously via the uaranshielded AS-i flat cable.

• SOLID-2 Safety Light Curtain
• SOLID-4E Safety Light Curtain
• Safe AS-Interface bus participant for connecting 1 Leuze electronic SOLID-2 or SOLID-4E Safety Light Curtain
• LED displays: AS-i status, inputs
• Error signal can be retrieved via AS-Interface
• AS-Interface addressing via integrated addressing port
• Simple bus connection with AS-i penetration technology
• Mounting plate for DIN rails and screwed mounting

Safety Laser Scanners are a cost-effective and flexible protective devices alternative for danger zone guarding of large areas in the vicinity of these machines. Switching between any kind of monitoring areas is possible with up to 6.25 radius, process-conditional according to the application. All configuration data, such as the definition of the zones, the resolution or the response times, is defined with the RS4soft configuration and diagnostics software.

Compactness, protective/warning field combination and field changeover are the essential features of Safety Laser Scanners for guarding corridor supply vehicles. The protection area of the traveling direction and speed of the vehicle is adjusted using staggered protective fields and their situation-conditional activation.

The Safety Laser Scanner also offers very significant advantages for portal processing systems. On one hand the vehicle can be monitored during the movement, while on the other hand, in standstill the Laser Scanner assumes a danger zone guarding of the tools integrated in the portal.

COMPACTplus/AS-i Series

• Type 4 Safety Light Curtain in accordance with IEC/EN 61496-1/-2
• Type 4 Multiple Light Beam Safety Device in accordance with IEC/EN 61496-1/-2
• Integrated AS-Interface, bus connection via the AC-PDA1/A, adapter for AS-i data transfer and separate 24-volt power supply
• Safe data transfer of the OSSD signals via AS-Interface
• Device swap-out without PC via SERVICE function of the AS-i Safety Monitor
• Muting restart function possible via AS-Interface by calling up AS-i-IC parameters
• Additional diagnostics information via AS-Interface, e.g. Muting sensors status, Muting or weak signal display
• Several devices can be cascaded (COMPACTplus-b, COMPACTplus-i)
• Direct connection of Muting sensors, start/restart button or lamp directly on the device via sensor connection module (COMPACTplus -m)

Our Leuze Safety Laser Scanner Type 3 distributors warehouse stocks some Leuze products enabling us to further assist you in finding the correct Leuze Safety Light Curtains Type 4 in the USA, Canada, or Mexico. It will be very helpful if you have the Leuze Multiple Light Beam Safety Devices Type 4 part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Leuze AS-i Safety Monitor Category 4 that you are looking for in seconds. If you do not have the part numbers for Leuze Lumiflex Safe AS-i Coupler Module, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.