(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Lenze 8200 Vector Frequency Drives

• Power range
  • 0.25 kW to 7.5 kW 230 V/240 V (+10 %)
  • 0.55 kW to 90 kW 400 V/500 V (+10 %)
• Overload capacity 180% rated torque for 60 seconds from 15 kW upwards, additional 210 % rated torque for 3 seconds
• Operating modes: V/f linear, V/f quadratic, vector control, torque selection
• Chopper frequency 1, 2, 4, 8, 16 kHz
• Output frequency up to 650 Hz
• Up to 2 analog inputs, bipolar as an option (0-10 V, -10 V to +10 V, 0-20 mA, 4-20 mA; resolution 10 bits)
• Short-circuit-proof, earth-fault-proof during operation
• RS232/485 serial interfaces, optical fibre version available as an option

If you are looking for Lenze Drives, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Lenze Frequency Inverters that you are looking for at the lowest prices possible. If you are searching for Lenze Variable Speed Drive technical information (data-sheets) please use the Lenze Datasheets OR Product Selection Guide page links. For a list of user manuals or operating instructions available, please use Lenze User Manuals page link.

Lenze 8400 L-Force VFD Drives

Precisely tailored to your application - this is what the new Lenze frequency inverter generation stands for. Lenze customers demanded Rightsizing which made us produce a frequency inverter series where each successive model as BaseLine, StateLine, and HighLine builds on the previous one in terms of functionality and drive behaviour. On each and every one, the installation, parameterisation, operation, and service are identical. Combined with intelligent features, as provided by the memory module and the online-diagnostics Lenze 8400 drives contribute to process optimisation and more added value in the engineering industry.

Lenze 9300 Vector Frequency Inverters

• Power range
  • 0.37 to 90 kW, 400 V / 480 V
  • 110 to 400 kW, 400 V / 500 V
• Overload capacity: Depending on the type up to 180 % rated torque for 60 s
• Control methods: Vector control, V/f-characteristic control (linear and square)
• Connection to common fieldbus systems (PROFIBUS, INTERBUS, DeviceNet, CANopen)
• Protective function against unitentional start-up (safe standstill to EN954-1) as option
• Menu-guided keypad with clear-text display
• Input for external supply of the control electronics (back-up operation in the event of a mains failure)
• 2 PID controllers

Lenze 8200 Motec Frequency Drives

• 8200 motec frequency inverter - 0.25 to 0.37 kW (single-phase), 0.55 to 7.5 kW (three-phase)
• Starttec Motor Starter typically 0.25 to 4 kW (three-phase)
• Usability on standard mains voltages provides the basis for use all over the world
• Certification in accordance with international standards: CE, UL, cUL
• Faster installation, Reduction in costs due to shorter cables, and Fewer sources of error

Lenze Drive PLC is a freely programmable and powerful PLC dedicated to the control of inverter drives. Not only is this control unit capable of monitoring the movements of your machine, but it can also take charge of central control tasks. The Drive PLC is programmed using the PLC languages of the IEC 61131-3 international standard. As well as offering options for connection to the most popular types of fieldbus, the Drive PLC also features gateway functionality. Received process data are forwarded to the connected drive controller via the built-in system bus. The Input & Output Terminals of the Drive PLC can be extended quickly and easily by means of extension boards or function modules.

With its price, its flexibility and a power range of up to 20 Hp, AC Tech SMVector drive excels in environments where Inverter Technology was once considered too costly, including packaging machinery, food processing machinery, material handling/conveying systems and HVAC systems.

AC Tech SMVector inverter carries all the features required by demanding applications including four modes of operation (V/Hz, Enhanced V/Hz, Vector Speed, and Torque), high starting torque, auto-tuning, advanced low-speed control, and dynamic speed regulation.

Lenze Frequency Inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and Lenze can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Lenze Drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW. Requiring just three face mounted operator buttons and a handful of parameters, commissioning the Lenze SMD Drive is child's play. Parameter settings can be saved on the unique EPM (Electronic Programmable Module) and copied to other drives in the same range as many times as required.

Lenze SMD Drives come with integrated motor overload protection. A microprocessor calculates the motor power independently of the output speed, protects the motor and renders other hardware superfluous. Lenze SMD Inverter also features current limiting with frequency reduction for stable operation, a clearly legible LED display and the option of low-noise operation thanks to a configurable switching frequency up to 10 kHz. The function and number of control terminals corresponds to the familiar Lenze standard. The smd support operation between 0,25 and 22 kW.

Despite their compact dimensions, Lenze TML and TMD Frequency Inverters truly are multi-talented and ready to take on any challenge. Operation couldn't be easier. Commissioning can be completed using just the three face mounted buttons. The EPM parameterisation procedure really is ahead of its time. The pluggable memory chip on the front panel provides safe storage for all drive data. These Lenze Frequency Inverters also score top marks in terms of power. The single-phase Lenze TML Drives support operation between 0.25 and 2.2 kW and the three-phase Lenze TMD Inverters between 0.37 and 7.5 kW. Lenze TMD variants supporting other voltage supplies are available on request. Lenze TML and TMD Drives have been designed for simple applications. A clear concept and fast commissioning save time and money. Both frequency inverters come complete with an extensive range of options.

The EPM (Electronic Programmable Module) is a pluggable memory chip which provides safe storage for all drive data. Programming is either performed on the inverter directly or offline using hand-held EPM programmer, so you always have access to your configuration data via either method. The EPM plugs into the front panel of the drive. Existing configurations can be used, copied and edited as often as required and in just a few seconds simply by plugging in a different module. This interchangeability extends right across the frequency inverters SMD, TML/TMD ranges and Servo Drives 94 SimpleServo/940 PositionServo.

AC Tech MC Series is the intelligent, versatile and cost-effective choice for industrial applications. From harsh environments to high torque loads, the M1000 Series microdrives meet the toughest requirements with outstanding reliability, at a low cost. The easy-to-program AC Tech M1000 offers full features, extensive I/O, and a full array of programmable functions.

The M1000 is available in a power range of 1/4 to 150 HP (0.18 - 110 kW) and voltages ranging from 115 to 575 VAC. With its Enhanced Torque System (ETS), a highly efficient sine coding algorithm and "auto-voltage boost," the M1000 delivers maximum starting and accelerating torque and tight speed regulation, even under fluctuating load conditions. A built-in, UL-approved thermal overload provides full motor protection.

Whether we have Lenze VFD Drives in stock in or need to ship direct from Lenze to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get Lenze Inverters to you fast and save you some money. For a list of frequently asked questions or how to instructions, please use Lenze FAQs page link.

Our Lenze Inverters distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct Lenze Variable Frequency Drives in the USA, Canada, or Mexico. It will be very helpful if you have the Lenze Vector Frequency Inverters part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Lenze Starttec Motor Starter that you are looking for in seconds. If you do not have the part numbers for Lenze Vector Drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.