(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Lenze 8200 Vector Frequency Drives

• Power range
  • 0.25 kW to 7.5 kW 230 V/240 V (+10 %)
  • 0.55 kW to 90 kW 400 V/500 V (+10 %)
• Overload capacity 180% rated torque for 60 seconds from 15 kW upwards, additional 210 % rated torque for 3 seconds
• Operating modes: V/f linear, V/f quadratic, vector control, torque selection
• Chopper frequency 1, 2, 4, 8, 16 kHz
• Output frequency up to 650 Hz
• Up to 2 analog inputs, bipolar as an option (0-10 V, -10 V to +10 V, 0-20 mA, 4-20 mA; resolution 10 bits)
• Short-circuit-proof, earth-fault-proof during operation
• RS232/485 serial interfaces, optical fibre version available as an option

If you are looking for Lenze Drives, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Lenze Motors that you are looking for at the lowest prices possible. If you are searching for Lenze Servo Inverters technical information (data-sheets) please use the Lenze Datasheets OR Product Selection Guide page links.

Lenze GST Helical Gearbox

High permissible radial forces and torques along with closely stepped speed reduction ratios are the key features of these economical 1, 2 or 3-stage geared motors, which are of a robust design. Because the motors are fully integrated, they can be used when space is at a premium, even in category 2 applications.

• Drive-end versions
  • Integrated three-phase AC motors in EExe, Zone 22 and standard motors in EEx(d)e
  • IEC motor adapter
• Output-end versions
  • Solid shaft with keyway
  • Foot or flange mounting

Lenze MCS L-Force Synchronous Servo Motors

The motor sizes have been carefully graded and offer rated torques from 0.5 to 51 Nm (0.25 to 10.0 kW) and peak torques of up to 191 Nm. As a result, finding the optimum motor for any drive task is easy.

• Featuring innovative single element pole technology, the fully-encapsulated stator consists of individual coils.
• High-quality magnetic materials and specially formed poles significantly improve power density, reduce moments of inertia and increase efficiency.
• Minimal detent torques ensure superb smooth running characteristics and make for an excellent control response.
• The robust design with its reinforced bearing system and high degree of protection ensures operational reliability even when ambient conditions are harsh.
• The electronic nameplate makes for easy connection to 9400 servo controllers. cURus and GOST-approved as standard, promoting universal use.

Lenze GKR Bevel Gearmotors

This 2-stage, right-angle gearbox for use in low to medium applications is characterised by its high efficiency, lightweight design (thanks to the aluminium housing) and wear-free gear teeth. With Lenze bevel gearboxes/geared motors, you will benefit from lightweight designs and low life cycle costs - they are efficient, economical and fit for the future.

• The gearboxes/geared motors are used in the following areas: Materials handling technology, logistics, transport, Industrial handling, Building services engineering including air conditioning, & Packaging technology
• Drive-end versions comes with integrated three-phase AC motors, & IEC motor adapter
• Output-end versions comes with Hollow shaft with keyway or shrink disc, Solid shaft with keyway, Foot or flange mounting, & Torque plate with rubber buffer

Lenze GST Helical Geared Servo Motor

The 2 and 3-stage parallel-axis gearboxes are primarily used as shaft-mounted gearboxes. Low gear teeth backlash combines with friction-locked shaft-hub connections at both drive and non-drive ends to maximise accuracy. The geared motors are used in the following areas:

• Materials handling technology
• Process engineering
• Plastics
• Food, beverages and tobacco industries
• Packaging technology

Lenze MDXMA Asynchronous Motors

Three-phase asynchronous motors are well-established in practically all areas of industry. Lenze three-phase AC motors have been specially designed for inverter operation. Safe, continuous operation is ensured thanks to the special design of the windings and insulation system. The motors feature thermal sensors as standard to enable temperature monitoring. Superb smooth running characteristics are maintained throughout the entire speed range during frequency inverter operation and as a result, a large setting range is possible.

Versions

• Solid shaft with keyway
• Foot or flange mounting
• Integral fan
• Separate fan
• Brake
• Resolver
• Incremental encoder

Lenze StateLine 9400 Servo Drives

Lenze StateLine 9400 Servo Drives has the standardised DS402 / IEC 61800-7-2 device profile and is the perfect adapted servo inverter for central topologies. The StateLine is mainly noted for its quick commissioning. Benefit from the following implemented operating modes:

• Homing mode
• Interpolated position mode
• Cyclic synchronos velocity mode
• Cyclic synchronous torque

The devices communicate via a higher-level "Motion Control" control system or an Industrial PC via the CANopen extension module. The modular concept of the 9400 Servo Drives means that the system is suitable for future fieldbus systems. The highlights of the StateLine include its modular Integrated safety engineering which makes your machine safe.

Lenze MGQU/MGFQK Shunt-Wound Motors

The square framed design of this range is the key to its high power-to-size ratio. The result is a series of extremely economical drives, which can be easily and precisely controlled by means of single and multi-quadrant DC speed controllers. The reliable and quiet internal cooling combines with the appropriately designed commutation system to provide the basis for the large power reserves, which are required for dynamic positioning applications, for example.

Lenze MGFQU motors are uncompensated. The compensation winding that is a feature of the MGFQK series ensures current/torque proportionality even in the overcurrent range and safeguards against instability in the event of field weakening. These DC motors whose power range extends to over 90 kW are available with various degrees of protection as part of a modular system. They can be combined with gearboxes, brakes and feedback systems as appropriate to the application concerned.

Lenze Intorq Long Life Spring Operated Brakes

• Armature plate with low backlash and reinforced torque support
• Compression springs with guide pins for protection against shearing forces
• Aluminium rotor with toothed intermediate ring: Both the friction lining and the tooth system have a low rate of wear
• Sizes 06, 08, 10, 12
• Stator in line with the "N design"

The ECS servo system works with central supply and axis modules that can be overloaded by 100-220% for output peak currents between 4 and 64 A. The system has been optimised for high-dynamic multi-axis applications such as those found on feeders and unloaders on industrial handling systems, gantry systems and machine tools as well as in applications in the packaging industry. Drive variants with preinstalled application software for positioning, co-ordinated multi-axis motion or general speed and torque control simplify commissioning. The "Application" drive variant is freely programmable in the IEC 61131-3 languages. Powerful technology templates provide assistance in completing the task at hand.

Lenze is one of the leading industrial innovators in Germany and has about 3000 employees worldwide. Some 200 of these work in Research and Development in Germany, focusing on products, solutions, systems and services for mechanical and electronic drives. In the financial year 2004/2005 Lenze recorded a turnover of 466.2 million euro. The company's headquarter is at Hamelin in Germany, where the company was founded in 1947 by Hans Lenze.

Lenze's product range includes frequency inverters, servo drives, geared motors, motors, clutches and brakes. It also features automation solutions with integrated software, visualisation and controls as well as system engineering, coupling technology and services. This is completed by a global service network which can be accessed 24/7 from anywhere in the world. The world is Lenze's market, so you will find us represented in all its major locations. Our largest operational sites are located in Aerzen and Extertal (Germany), Asten (Austria), Shanghai (China) and Uxbridge, Massachusetts (USA).

Other Lenze Products Offered Through AC Tech

• AC Tech Inverters
• AC Tech Sub-Micro VFD Drives
• AC Tech Enclosed Micro-Drives
• AC Tech HVAC Drives

As well as being at the heart of product development, the ease with which Lenze products can be used, their usability, is to the benefit of our customers. Lenze's new products are modular by design and can be adapted to meet changing requirements. Even safety engineering can be integrated. Although Lenze is a public limited company, the spirit in which the company is run very much reflects its family roots. The high value placed on each individual's contribution is clearly evident every day. It is our employees' commitment to their work that sets them apart. As a multinational corporation, Lenze has one clear goal: to be right there where our customers need us. We are totally committed to meeting the wishes and requirements of our customers. Lenze products can increase the productivity and reliability of machines and plants. Lenze's international network means that we can be there whenever you need us. This creates trust and is the key to our success. We invite you to find out more about the world of Lenze.

Driving, positioning, transporting: these are applications for which Lenze can offer a broad range of components, solutions and services. Lenze drive and automation technology is used in a wide variety of industries, for example in materials handling technology, in the packaging industry, the industrial handling sector, the robotics sector and in automotive construction. Lenze products are carefully co-ordinated and matched and can be combined as required to provide the right solution for your needs. Automation solutions with integrated software and system engineering, connection technology and a global customer service network complete the offer. Our reliability combines with the quality of our products and services to enable us to increase the productivity of our customers in mechanical engineering and that of machine operators.

The increasing level of automation in machines and systems and the consequent rise in the number of I/O devices have in turn increased the amount of wiring required. Decentralised I/O systems bring order to this chaos. Lenze offers two product concepts with IP 20 degree of protection which are suited to both simpler digital applications and more complex automation tasks. Modern systems are often designed in such a way that products can be replaced quickly and without complication. If a high degree of response and accuracy are also required, Lenze's servo drive systems offer the necessary flexibility. Combined drive controller and servo motor packages featuring perfectly matched components provide solutions for a wide variety of requirements. Compared to mechanical and pneumatic solutions, servo technology is not only more responsive and accurate, but also better value for money and more wear resistant.

Frequency inverters are used for electronic speed control on machine drives. The needs of the market are wide and varied, and Lenze can offer a homogeneous range of standard products for everything from simple speed control to complex applications with high requirements in respect of drive behaviour and functionality. Lenze drives are reliable in respect of operation, flexible in terms of application, easy to commission and meet high standards of quality. We can provide a solution to suit any requirement in the power range between 0.25 and 400 kW. We are driven by the demand for machines and systems that can deliver increased productivity, flexibility and safety. If you are looking for a partner with the right expertise, Lenze, with its range of high-performance gearboxes and geared motors with scalable functions, is the perfect choice. Whether you are interested in individual components or complete drive systems, Lenze will be happy to answer any queries you may have about project planning and commissioning and our after sales service staff are always there to help.

Whether we have Lenze Motors & Drives in stock in or need to ship direct from Lenze to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get Lenze Motors & Drives to you fast and save you some money!

Our Lenze Inverter distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct Lenze Drives in the USA, Canada, or Mexico. It will be very helpful if you have the Lenze Motors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Lenze Brakes & Clutches that you are looking for in seconds. If you do not have the part numbers for Lenze Servo Drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us!