(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Lenze MGQU/MGFQK Shunt-Wound Motors

The square framed design of this range is the key to its high power-to-size ratio. The result is a series of extremely economical Drives, which can be easily and precisely controlled by means of single and multi-quadrant DC speed controllers. The reliable and quiet internal cooling combines with the appropriately designed commutation system to provide the basis for the large power reserves, which are required for dynamic positioning applications, for example.

Lenze MGFQU motors are uncompensated. The compensation winding that is a feature of the MGFQK series ensures current/torque proportionality even in the overcurrent range and safeguards against instability in the event of field weakening. These DC motors whose power range extends to over 90 kW are available with various degrees of protection as part of a modular system. They can be combined with Gearboxes, brakes and feedback systems as appropriate to the application concerned.

If you are looking for Lenze DC Motors, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Lenze Shunt-Wound DC Motor that you are looking for at the lowest prices possible. If you are searching for Lenze Permanent Magnet DC Motors technical information (data-sheets) please use the Lenze Datasheets OR Product Selection Guide page links.

Lenze MGFRK Shunt-Wound Motors

In harsh industrial environments, DC motors with standard housings featuring IP54 degree of protection have a proven track record stretching back decades. They offer flexibility in terms of installation, with various designs and mounting positions supported. They can be easily combined with gearboxes, brakes and feedback systems. The axial forced ventilation makes for a large control range at full torque.

Lenze DC motors feature a compensation winding. This ensures torque/current proportionality, which in the case of some motors can be maintained even at 300% overcurrent, thereby enabling dynamic positioning or short-time high starting duty, for example. In the case of IEC frame sizes 90 to 160, powers of 0.33 to 27 kW can be achieved, depending on armature voltage and speed.

Lenze DC Permanent Magnet Motors 13.120

DC permanent magnet motors from Lenze can be very well adapted to the requirements of machines due to the customised selection of the degree of protection, winding variations, designs and appropriate built-in accessories. With its smooth-bodied design the series 13.120 achieves a high power density in the range from 55 to 600 W. The motors operate with natural ventilation and are enclosed to IP54. Standard measures enable the flexible combination with gearboxes or other built-on accessories from a modular system.

Whether we have Lenze DC Motors in stock in or need to ship direct from Lenze to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get Lenze Shunt-Wound DC Motors to you fast and save you some money.

Our Lenze Motors distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct Lenze Permanent Magnet DC Motors in the USA, Canada, or Mexico. It will be very helpful if you have the Lenze DC Motors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Lenze Shunt-Wound DC Motors that you are looking for in seconds. If you do not have the part numbers for Lenze Motors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.