(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Dynamic torque-vector control system performs high-speed calculation to determine the required Motor Power For The Load Status. FUJI's key technology is optimal control of voltage and current vectors for maximum output torque.

• A high starting torque of 200% at 0.5Hz. (180% for 40HP or larger models.)
• Achieves smooth acceleration/deceleration in the shortest time for the load condition.
• Using a high-speed CPU quickly responds to an abrupt load change, detects the regenerated power to control the deceleration time. This automatic deceleration function greatly reduces the inverter tripping.
• Feedback control with PG enables the inverter to execute "vector control with PG" by adding an optional PG feedback card to obtain higher performance.
  • Speed control range: 1:1200
  • Speed control accuracy: ±0.02%
  • Speed control response: 40Hz

If you are looking for FUJI Electric FRENIC-Standard Drives, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the FUJI FRENIC-5000G11S Series VFDs that you are looking for at the most competitive prices possible. If you are searching for FUJI Electric FRENIC-5000P11S Inverters technical information (data-sheets) please use the FUJI Electric Datasheets OR FUJI Electric Product Selection Guide page links.

New On-Line Tuning System

• On-line tuning to continuously check for variation of motor characteristics during running for high-precision speed control.
• This tuning function also available for a second motor, which allows high-precision driving of the second motor by changeover operation between two motors.

Advanced, Convenient Functions

• 16-step speed with Timer Control, rotating motor pick-up control for conveyance machinery
• Automatic energy-saving operation, PID control, cooling fan on/off control, line / inverter changeover operation for fans and pumps
• Rotating motor pick-up control : Restarts motor without any shocks, by detecting motor speed where motor is coasting after momentary power failure occurs.
• Automatic energy-saving operation function : Minimizes inverter and motor loss at light load.

Intelligent Keypad Panel

• Copy function: Easily copies function codes and data to other inverters.
• Six languages (English, French, German, Italian, Spanish, and Japanese) are available as standard.
• Jogging (inching) operation from the Keypad or external signal
• Remote operation using optional extension cable (CBIII-10R-***)

Extensive Product Line

• Two series are available: G11S series ranging from 1/4 to 600HP for general industrial machines and P11S series ranging from 7.5 to 800HP for fans and pumps.
• Totally-enclosed casing (NEMA1) (up to 30HP as standard).
• Optional NEMA1 enclosure available for 40HP or larger models.

Reduced Motor Wow At Low Speed

• Motor wow at low speed (1Hz) reduced to less than 1/2 of that achieved by conventional inverters, with the dynamic torque-vector control system, in combination with the Fuji's unique digital AVR.

Environment-Friendly Features

• Provided with low-noise control power supply systems which minimize noise interference on peripheral devices such as sensors.
• Equipped with terminals for connecting DC REACTOR that can suppress harmonics.
• Complied with EMC Directive (Emission) when connected to optional EMC compliance filter.

Global Products, Communication

• Conforms to major world safety standards : UL, cUL, T?V (up to 30HP), EN (CE marking)
• Equipped with RS-485 interface as standard.
• Connection to field bus: PROFIBUS-DP, Interbus-S, DeviceNet, Modbus Plus (Option)
• Universal DI/DO : Monitors digital I/O signal status and transmits to a host controller, helping to simplify factory automation.

Protective Functions, Simple Maintenance

• Protection
  • Motors with various characteristics can be used by setting thermal time constant for the electronic thermal overload protection.
  • Input phase loss protective function protects the inverter from damage caused by disconnection of power supply lines.
  • Motor is protected with a PTC thermistor.
  • Input terminals for auxiliary control power supply (2HP or larger models) : Alarm signal output will be held even if main circuit power supply has shut down.
  
  
• Excellent Maintainability

  The items below can be monitored on the Keypad panel and making it easy to analyze the cause of trip and to take preventive measures.

  • Input/output terminals check
  • Life expectancy of main-circuit capacitors
  • Inverter on-load factor
  • Accumulated operation time
  • Inverter operating condition (output current, heat sink temperature, input power, etc.)
  • Detailed data on trip cause

Other Useful Functions

• Side-by-side mounting (up to 30HP) saves space when inverters are installed in a panel.
• The uniform height (10.24inch(260mm)) of products (up to 10HP) makes it easy to design panels.
• User-definable control terminals: Digital input (9points), transistor output (4points), and relay contact output (1point).
• Active drive feature: Performs prolonged acceleration at reduced torque, monitoring the load status to prevent tripping.
• Stall prevention function is provided as standard. Active or inactive can be also selected.

Standard Specifications

G11 Model Cross Reference - For GE Drives

P11 Model Cross Reference - For GE Drives

Whether we have FUJI Electric VFDs in stock in or need to ship direct from Fuji Electric Corp. of America (FECOA) to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get FUJI Electric Inverters to you fast and save you some money!

Our FUJI distributors warehouse stocks some FUJI Electric Inverter products enabling us to further assist you in finding the correct FUJI FRENIC-5000G11S/5000P11S Series Drives in the USA, Canada, or Mexico. It will be very helpful if you have the FRENIC Inverter part numbers ready, then our sales representatives can provide you with a pricing and availability quote for FUJI FRENIC-5000G11S Series General Industrial Machine Drives that you are looking for in seconds. If you do not have the part numbers for FUJI FRENIC-5000P11S Series Variable Torque VFDs, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible. For a list of user manuals or operating instructions available, please use FUJI Electric Operating Instructions page link.

Can't find a part number?
E-mail Us!