|
Welcome to CTi Automation
CTi Automation is a recognized leader among the largest manufacturers and
distributors in the high-tech motion control and factory automation industry in the Pacific Northwest. Featuring over 20, 000 parts
online, CTi Automation has exactly what you are looking for. Now more than ever CTi Automation is your destination for the
industrial factory automation parts.
 |
 |
HCV-6KAU & HCV-6KALU Series Contactors
720 Amp, 2300-7200 Volts (Medium Voltage) This 720-ampere contactor replaces Toshiba's CV461M-KAT(L) and
utilizes the latest vacuum and solid state technology developed by Toshiba. The HCV-6KA uses a solid state, electronic control
(drive unit), to operate the contactor. The drive unit uses an electronic circuit, and any control voltage between 100V and 240V
either AC or DC can be used without changing the coil and/or other parts.
The contactor is available in either electrically maintained or latched type version. The HCV-6KA incorporates
Toshiba's patented "Axial Magnetic Field Type Electrode" in the vacuum interrupters. This special design results in higher
current interruption and smaller size than any other comparable design of interrupters.
|
|
|
|
 |
VMX-S Series Standard Duty "Configured"
VMX-S series soft starters are designed for lighter duty loads (like many pumps, fans and blowers) where a
soft starter rated at 350% for 30 seconds is more than adequate. Same great performance features and accessories you would find
in the "Heavy Duty" offering, only supplied with a shunt duty rated integral bypass contactor instead of a line rated contactor.
A cost-effective and reliable motor starting solution for standard duty applications.
- 500% rated for 30 seconds
- Prepackaged combination or non-combo starters
- Built-in circuit breaker or fusible disconnect option with door-mounted lockable operator handle
- NEMA 4/12 enclosure
- Integral line-start (ATL) rated bypass contactor
- Advanced motor protection
- Control power transformer
- Interface board for easy control connections
- Door mounted keypad & pilot devices
|
|
From sales to shipping CTi Automation is committed to meeting your requirements for the right product, on time.
Our mission is to be the source most preferred by engineers and buyers to design, prototype, test and manufacture electronics.
CTi Automation is committed to meeting requirements and creating total customer satisfaction with on-time performance, order
accuracy and the highest quality of service. This is accomplished through our commitment to continual improvement of our people,
our suppliers, and our processes.
 |
 |
|
Typical Starter / Contactor Configuration
Most Solid State Starters can be configured to operate with an inline contactor
or bypass contactor.
The reduced voltage starter will have minimal line voltage leakage on the leads of the motor. As with all
solid state equipment, removing and tagging of an air gap device is required for safety before servicing the equipment.
|
Sign up for information about new products, specials, and promotions. |
|
|
|
|
|
