(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

The S10 series, in a practical and sturdy tubular M18 metal housing, suits the more difficult applications in the mechanical or food industries. The IP69K mechanical protection guarantees resistance to washdown with water jets at high temperatures reaching 80°C and pressure reaching 100 bar. Moreover, AISI-316L stainless steel versions are available for a major resistance towards chemical agents and aggressive detergents as well as to acid corrosion. The lens in PMMA plastic offers the possibility of mounting a glass MEK-proof protection. A reflector with IP69K mechanical protection is available for the retroreflex versions.

The S10 series includes adjustable proximity versions reaching 10, 35 or 60 cm and 14 mm fixed focus proximity, 4 m retroreflex and 3 m polarised retroreflex, 1 m retroreflex for transparents as well as 8 m through beam models. The M12 connection requires only 3 wires for power supply and NPN or PNP output.

If you are looking for Datasensor Tubular Sensors, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find Infra S10 Series Sensor that you are looking for at the most competitive prices possible. If you are searching for Datasensor S18 Series Switch technical information (data-sheets) please use the datasheets or product selection guide page links.

The S18 series basic line includes all the most diffused tubular photoelectric sensor models. The retroreflex optic function is available in two versions, with or without the optic polarisation filter for the detection of shiny objects, and with operating distances up to 3 m according to the reflector used. Two different diffuse proximity versions with 10 or 30 cm operating distances are also available; while the through beam models offer a 12 m operating distance.

The connection can be either with a cable or M12 connector; in both cases the 4 wire connection allows the complete configuration of the NPN/PNP output and dark/light operating mode. The S18 models offer ABS housing and fixing nuts, while the S18M models offer them in nickel-plated brass. The IP67 protection is guaranteed in all models.

The main characteristic of the M18 tubular S15 sensors is the housing length of only 40 mm, especially suitable for applications with reduced space. The S15 series is available with cable output, in order to maximise the concept of 'reduced dimensions' as well as to offer contemporaneously the best installation flexibility. The S15 series is supplied without the sensitivity adjustment trimmer to ease and speedup installation. This feature drastically reduces the possibility of allowing the operator to modify the sensor's performances and so guaranteeing major reliability and productivity.

The main optic functions used in the industrial market are available, polarised retroreflex, non-polarised retroreflex, diffuse proximity and through beam. These sensors are ideal for the most critical applications with harsh environmental conditions thanks to the IP69K mechanical protection.

The S50 series offers all optical functions within a M18 housing. With the universal sensing functions of proximity, polarised retroreflex and through beam, which are also available with class 1 laser emission, as well as the more advanced functions of background suppression, background/foreground suppression, analogue displacement, contrast and luminescence, the S50 really is one housing for all applications. The S50 setting is carried out-by either by potentiometer, which is sealed to IP67, or using the patented EASYtouch push-button teach system, which gives rapid and precise automatic setting of the switching points.

The S50 series is available both in flat plastic format ideal for M18 nut or screw mounting through the sensor body, as well as a cylindrical metal housing. Axial or radial optics are available in both housings with integral cable or M12 connection conforming to EN 60947-5-2, the European wiring standard. The performance, versatility and extensive optical sensing options, positions the S50 series as the new bench mark for customers focused on the evolution of technology and development of standards.

The S5 series offers a range of plastic tubular M18 photoelectric sensors. The most varied optic functions can be chosen amongst the fixed focus or diffuse proximity models with short, medium or long operating distances reaching 60 cm; the 4 m retroreflex, 3 m polarised retroreflex and 1 m for detection of transparent materials; the 12 m through beam and models with Fibre-Optic Connection. A red LED indicating the output status is visible on the bottom side of the sensor. The versions with trimmer adjustment present also a green LED signalling the switching stability according to the received signal's intensity. The rugged ABS housing always guarantees IP67 protection.

The S51 series offers the most cost-effective solution in M18 photoelectric sensors which is today improved thanks to the increase of the operating distances. The diffuse proximity model presents a 10 cm fixed operating distance with wide emission spectrum and the another model with 1 - 40 cm trimmer-adjustable operating distance. Standard retroreflective models have an operating distance up to 4 m whilst the polarised retroreflective models used for reliable detection of reflective objects are fitted with sensitivity adjustment and have a 3.5 m operating distance. The emitter and receiver models, used for longer operating distances, reach 18 meters. The output mode can be inverted using the dark/light selection input wire provided.

The M18 tubular sensors of the SDS series, thanks to the background suppression proximity optic system, precisely detect all objects inside the set operating distance, independently from colour and rear fixed or moving objects. The photoemitter is a red light LED that generates a visible circular spot; the receiver is a PSD (Position Sensitive Device) photoelement sensitive to the incident light's position.

A good vibration immunity and a low detection difference between lighter or darker objects are obtained as there are no moving parts for the optic triangulation. The background suppression distance setting is precisely obtained by means of a multi-turn trimmer. Normally open and normally closed outputs are both present with standard configuration.

The SL5 sensors, thanks to The Laser Emission Concentrated in a Thin Light Beam, represent the ideal solution for the detection of very small objects or to reach very long operating distances. Precise detections with decimillimetre resolutions can be obtained with the proximity model at an operating distance ranging from 0 to 35 cm. High operating distances can be reached with the 12 m polarised retroreflex model, or with the 60 m through beam model; high-resolution detections at shorter distances can be effected also.

The visible red emission is generated by a Class 1 laser according to the EN 60825-1, guaranteeing the maximum safety in all applications. The sensitivity adjustment trimmer and the LEDs indicating the output status and switching stability are positioned on the sturdy ABS tubular M18 housing with IP67 protection.

The S12M series includes a basic line of photoelectric sensors developed in the standard tubular M12 format. The diffuse proximity is available in different versions: a 10 cm fixed operating distance model with visible red emission, or a model with trimmer adjustable distance from 0 to 30 cm and infrared emission.

The sensitivity adjustment trimmer and visible red emission characterise the 1 m polarised retroreflex models and the 5 m through beam models. A yellow LED indicating the activation of the PNP output is present in all models. The tubular metal housing includes the M12 connector inside one single block, guaranteeing reduced dimensions and the maximum protection degree.

Whether we have S50 through beam sensor in stock in Boise Idaho or need to ship direct from Datalogic Italy to any USA cities; CTi Automation can get S50M proximity switch to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some S51 retroreflex polarized sensor enabling us to further assist you in finding the correct M18 photoelectric sensors in the USA, Canada, or Mexico. It will be very helpful if you have the S15 photoelectric sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for S10 DC version 3-wire sensors that you are looking for in seconds. If you do not have the part numbers for S18 M12 4-pole sensor connection, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.