(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

This compact relay box is the ideal solution able to guarantee a cost advantage respect to using a doublechannel Type 2 or Type 4 safety relay. The box can be used with all the safety light curtains of the SG and SE series that have the EDM function (External Device Monitoring, i.e. the control of the external counter status). It represents an efficient alternative to using a couple of force-guided relays. The front terminal blocks and DIN rail mounting guarantee extremely fast installation and cabling ease.

• Module for Type 2 and Type 4 electrical light curtains
• 2 inputs for OSSD
• Output contacts: 3 NO safety contact and 1 NC feedback/EDM contact
• Standard terminal block for channel cabling

If you are looking for Datasensor Accessories For Safety Devices, please call us at (800) 894-0412 or Email us at info@ctiautomation.net we will do our best to help you find the Datalogic SE-SRT Series Connection Box that you are looking for at the most competitive prices possible. If you are searching for Datasensor CV Series Shielded Cables technical information (data-sheets) please use the datasheets or product selection guide page links.

The ST series includes all the fixing brackets and supports available for the fixing of photoelectric sensors. The 'L' shaped fixing brackets are in metal and present dimensions that guarantee the best sensor fixing, offering the maximum resistance against shocks and vibrations that can alter the positioning. The holes are multiple or slotted in order to offer the best fixing versatility, even in place of other sensors. Plastic supports are available for tubular sensors: a fixed and an adjustable support with which the inclination of the sensor's optic axis can be regulated right up to a 15° angle in every direction for a 360° arch.

The SG Protective Stand accessory is a protective column formed by the SG-PS aluminium profile and the SG-SB steel base. The latter is composed of two plates mounted together using 3 load springs. The special profile, available in different lengths, ensures that the SG Protective stand can contain all the models of SE, SG2, SG4, SE BODY and SG BODY series and even the deviating mirrors of the SG-DM series.

• One single profile with different lengths suitable for all models of SE, SG2, SG4, SE BODY and SG BODY series
• Able to contain even deviating mirrors
• Aluminium profile
• Sturdy steel base composed of 2 plates mounted together using 3 load springs
• Spherical level ball to ease mechanical alignment
• Double rear groove

Accessory deviating mirrors of SG-DM series can be used with all DATALOGIC AUTOMATION SF2, SE, SG2, SG4, SG BODY safety light curtain series and with Sx-F/G-SG-ST safety photocell series. Available in different lengths starting from 150mm (single mirrors for mono and multibeam applications) and reaching 1900mm, making them ideal for classical perimeter protection. The SG-DM deviating mirrors can be mounted in a "stand alone" configuration directly on the machine or inside SG-PS protective stand series. Mirror mounting can be performed through dedicated accessory mounting kits: ST-PS-DM for protective stands mounting and ST-DM for "stand alone" mounting.

• Suitable for all models SF2, SE, SG2, SG4, SG BODY safety light curtains series and Sx-F/G-SG-ST safety photocells series
• Suitable for stand alone mounting on the machines or inside protective stands SG-PS series
• Sturdy aluminum profile
• 80mm width

The SG-IP69K accessory, is a PMMA acrylic tube used to protect and seal the safety light curtains of SG2, SG4 and SG BODY COMPACT series. Thanks to SGIP69K accessory the IP protection of the safety light curtain is increased from IP65 to IP67, IP68 and IP69K. The Gore-Tex membrane on the caps prevents water or dirt entering as well as internal condensation. The connection cable for the light curtain is protected and kept in its place by a M16 metric chock that prevents the entry of water or dirt. The SG-IP69K accessory is particularly used where high levels of humidity and temperature are present and machines or equipments are frequently washed with hot water (up to 80°C) at high pressure (up to 100 bars) and / or cleaned with detergents.

• Guarantees IP67, IP68 and IP69K mechanical protection
• Acrylic tubular PMMA housing
• Available for all models of the different heights of the SG2, SG4 (150 - 1800 mm) and SG BODY Compact (2, 3 and 4 beams) series
• Does not compromise the performance of the light curtain in terms of alignment
• Do not change the EAA value

The LENS SHIELD accessory for safety light curtains, composed of a PMMA Altuglas plate that can be mounted on the front glass of the safety light, ensures an effective protection against dust, chips and incandescent drops, deriving from material working near the safety light curtain.

Thanks to the unique profile, available in different lengths, the accessory suits all the models of the SG2, SG4 and SE series. The accessory can be easily installed thanks to the fixing brackets supplied in the package that exploit the side groove of the safety light curtain. It can also be quickly replaced when the glass is damaged.

Thanks to its completely new housing and fixing system SG-LP laser pointer can be installed in all safety light curtains profiles of SE, SG2, SG4-B and SG Body series. Exactly as the previous model SE-LP, the installation is performed through one of two lateral grooves; but, thanks to a specially designed CAMME fixing equipment the laser pointer can be inserted into the groove either from the top or from the side, depending on which kind of fixing brackets have been used to mount the safety light curtain (standard "L" or TOP-BOTTOM Rotating ones).

One top and one lateral fixing brackets, together with two tightening knobs allow to adjust SG-LP laser pointer's position in both transversal and longitudinal directions and to have it constantly centred respect light curtain's optical axis, independently from housing width.

The column and floor stands of the SE-S series, as well as being suitable for the SAFEasy SE safety light curtain series, can be used also with the SF2 safety light curtain series and deviating mirrors of the SE-DM series. Available in different heights: 800, 1000 and 1200mm with 30 x 30mm profile dimensions. 1500 and 1800mm with 45 x 45mm profile dimensions. Ground fixing plate dimensions: 240 x 240mm.

The protective stands of the SE-P series, as well as being suitable for the SAFEasy SE safety light curtain series, can be used also with the SF2 safety light curtains. Available in different heights ranging from 273 to 1743mm.

The deviating mirrors of the SE-DM series, as well as being suitable for the SAFEasy SE safety light curtain series, can be used also with the SF2 safety light curtain series and safety light beam of the Sx-ST2/ST4 series. Available in different heights ranging from 150mm to 1800mm. Deviating mirror dimension: 124 mm width, 6 mm depth.

Muting lamps: standard, tower modular, with horizontal and vertical mounting. Muting sensors: All DATALOGIC Non-Safety Sensors can be used.

The test pieces of the TP series allow to verify if the resolution of the SAFEasy safety light curtains is guaranteed inside the entire detection field. Models with diameter 14, 20, 30, 35, 40, 50 and 90mm mm are available.

M12 4-pole unshielded connectors are available for the connection of the Muting sensors. M12 4, 5 and 8-pole UL2464 cable connectors are available for SG2, SG4-B and new SG BODYseries.

• M12 axial or radial connector and cable with 3, 4, 5, 8, 12 poles
• Cable length: 3, 5, 7, 10, 15, 25, 50m
• Cable material: PVC

The use of shielded cables is compulsory for the safety devices of the SE2, SE4 light curtains and for the Sx-ST2/ST4 safety sensor series.

• M12 axial or radial connector and cable with 4, 8 poles
• Cable length: 3, 5, 10, 15, 25m
• Cable material: PVC

The SE-SR2 is a category 4 safety relay for SF2, SE. SG and SG BODY series of safety light curtains. The device presents 2 safety inputs for double channel safety devices and 4 safety relay outputs (3 NO and 1 NC). It can be configured in automatic or manual or even in monitored restart mode.

CS Unshildied Cables: M12 4-pole unshielded connectors are available for the connection of the Muting sensors. M12 4, 5 and 8-pole UL2464 cable connectors are available for SG2, SG4-B and new SG BODYseries.

• M12 axial or radial connector and cable with 3, 4, 5, 8, 12 poles
• Cable length: 3, 5, 7, 10, 15, 25, 50m
• Cable material: PVC

CV Shielded Cables: The use of shielded cables is compulsory for the safety devices of the SE2, SE4 light curtains and for the Sx-ST2/ST4 safety sensor series.

• M12 axial or radial connector and cable with 4, 8 poles
• Cable length: 3, 5, 10, 15, 25m
• Cable material: PVC

Whether we have CS series unshildied cables in stock in Boise Idaho or need to ship direct from Datalogic Italy to any USA cities; CTi Automation can get ST series fixing brackets to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some SE-SR2 series category 4 safety relay products enabling us to further assist you in finding the correct CS-ME series compact relay box in the USA, Canada, or Mexico. It will be very helpful if you have the SG-PS series protective stand accessory part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SG-DM accessory deviating mirrors that you are looking for in seconds. If you do not have the part numbers for SG-IP69K series PMMA acrylic tubes, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.