(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Datasensor CS series offers high-quality connectors, developed to guarantee maximum reliability with particularly compact dimensions in the standard M8x1 and M12x1 formats, can be used to connect photoelectric sensors as well as inductive or capacitive proximity sensors. The M8 and M12 connectors offer either an axial or radial shape; wired with a 4-pole normalised configuration, with 3, 5, 7 or 10 metre cable. Moreover, the M12 connectors are available in other versions with a 3-pole normalised configuration for a normally open output, or with a yellow PNP output LED and a green power LED. The connector body is in PUR plastic and the cable in PVC with CEI 20-22 flammability class.

If you are looking for DATASENSOR Accessories, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Infra Datalogic Sensor Accessories that you are looking for at the lowest prices possible. If you are searching for DataSensor Cables & Connectors technical information (data-sheets) please use the DataSensor Datasheets OR Product Selection Guide page links.

A wide range of prismatic reflectors is available as accessories for retroreflex sensors in order to guarantee excellent operation with infrared, visible red light and polarised emission. Reflectors of the R series satisfy the most varied application requirements, thanks to the different dimensions, shape, mounting possibilities or operating distances. The R2 and R5 reflectors are standard reflectors, respectively with 48 mm and 75 mm diameters, whereas the R4 and R6 high-efficiency reflectors can be used for longer operating distances. The R10 and R11 are suitable for specific applications requiring broad surfaces.

The R7, R8 and R20 microprism reflectors, suitable for high resolution detection, are available for sensors with laser emission. The R9 reflector is a miniature reflector with a self-adhesive housing fixing system. The self-adhesive reflective tape can be cut according to the required shape and dimensions, but it cannot be used in the presence of polarised light.

The control units of the PSCU series can be used to supply low voltage photoelectric sensors, as well as inductive or capacitive proximity, with the possibility to process the outputs with logic and timing functions. The input can be configured for 1 or 2 sensors, with NPN or PNP, with relay, or with 0-10 Vdc analog output, which can be controlled with different logic functions: NOT, AND, OR, NAND, NOR. The signal resulting from the logic operations drives the controller output, which can be processed with timing functions: ON and/or OFF delay, monostable or bistable commutation. On the PSCU control panel, protected by a transparent cover, are present the LEDs for power, inputs and output status indication, as well as the trimmer for the inputs sensitivity and the timer adjustment. The input selection, the logic and the timing functions are easily configured using the dip-switches on the controller side, where the extractable terminal blocks for the connection are also present. The PSCU series is suitable for DIN rail mounting and is available with a 100-240 Vac or 24 Vac/Vdc power supply input and relay SPDT or transistor NO-NC controller output.

Datasensor ST series includes all the fixing brackets and supports available for the fixing of photoelectric sensors. The 'L' shaped fixing brackets are in metal and present dimensions that guarantee the best sensor fixing, offering the maximum resistance against shocks and vibrations that can alter the positioning. The holes are multiple or slotted in order to offer the best fixing versatility, even in place of other sensors. Plastic supports are available for tubular sensors: a fixed and an adjustable support with which the inclination of the sensor's optic axis can be regulated right up to a 15° angle in every direction for a 360° arch.

Whether we have DATASENSOR Accessories in stock in or need to ship direct from Infra DataSensor to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get DATASENSOR Accessories to you fast and save you some money. For a list of frequently asked questions or how to instructions, please use DataSensor FAQs page link. If you are looking for Datasensor User Manuals, please follow this link.

Our Infra DataSensor distributors warehouse stocks some Connectors & Cables products enabling us to further assist you in finding the correct Mounting Brackets in the USA, Canada, or Mexico. It will be very helpful if you have the Infra Photoelectric Accessories part numbers ready, then our sales representatives can provide you with a pricing and availability quote for DataSensors Reflectors that you are looking for in seconds. If you do not have the part numbers for Infra DataSensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.