(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

The IS-12 series is an 12mm barrel inductive sensor with extended operating distance up to 8mm. It's available in a 2, 3 or 4-wire connection, 2-m cable, M8 and M12 connector. The IS-12 also features a programmable output configuration. 2-wire sensors will work with any sinking or souring devices and you only have two wires to terminate. 3-wire configuration is the most popular output and familiar by users. 4-wire design offer configurability in one device as it comes with both NPN or PNP and NO/NC outputs. Shielded versions allow flush mounting but limited detection range while unshielded version offer longer sending distance but flush mounting is not possible.

• 3 wires NPN or PNP output
• Extended operating distance
• LED indicator
• Cable, M8 or M12 connector
• Shielded or Non-shielded models

If you are looking for Datasensor Proximity Sensors, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Infra IS Series Inductive Proximity Sensors that you are looking for at the most competitive prices possible. If you are searching for Datalogic DPRI Series Magnetic Proximity Sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

The IS-18 series is an 18mm barrel inductive sensor with extended operating distance up to 14mm. It's available in a 2, 3 or 4-wire connection, 2-m cable, M8 and M12 connector. The IS-18 also features a programmable output configuration. All of our sensors are cULus and CE certified. It also boasts an IP67 rating. 4-wire design offer configurability in one device as it comes with both NPN or PNP and NO/NC outputs. Shielded versions allow flush mounting but limited detection range while unshielded version offer longer sending distance but flush mounting is not possible.

• 2, 3, or 4-wire configurations
• Extended operating distance
• LED indicator
• Cable or M12 connector
• Shielded or Non-shielded models
• 10-30VDC and 24-230VAC/DC models

The IS-30 series is an 30mm barrel inductive sensor with extended operating distance up to 20mm. It's available in a 2, 3 or 4-wire connection, 2-m cable, M8 and M12 connector. The IS-30 also features a programmable output configuration. All IDEC Datasensor inductive sensors offer highest electrical protection for short circuit and reverse polarity. The 2-wire, 3-wire or 4-wire design means you can choose the sensors to fit your applications. 2-wire sensors will work with any sinking or souring devices and you only have two wires to terminate. 3-wire configuration is the most popular output and familiar by users.

• 2, 3, or 4-wire configurations
• Cable or M12 connector
• 10-30VDC and 24-230VAC/DC models

The IS-04 series is available in a 3-wire connection and shielded operating distance of 0.8mm. Its 4mm barrel is ideal for application with limited space. All of our sensors are cULus and CE certified. It also boasts an IP67 rating. All IDEC Datasensor inductive sensors offer highest electrical protection for short circuit and reverse polarity.

• 3 wires NPN or PNP output
• 0.8 mm Shielded operating distance
• LED indicator

The IS-05 series is a 5mm barrel inductive sensor with shielded operating distance of 0.8mm. It's available in a 3-wire connection, 2-m cable or M8 connector. All of our inductive proximity sensors are cULus, CE certified and boasts an IP67 rating. It also offer highest electrical protection for short circuit and reverse polarity.

• 3 wires NPN or PNP output
• 0.8 mm Shielded operating distance
• LED indicator
• Cable or M8 connector

The IS-08 series is an 8mm barrel inductive sensor with extended operating distance up to 3mm. It's available in a 3-wire connection, 2-m cable, M8 and M12 connector. Shielded versions allow flush mounting but limited detection range while unshielded version offer longer sending distance but flush mounting is not possible. All of our inductive proximity sensors are cULus, CE certified and boasts an IP67 rating. It also offer highest electrical protection for short circuit and reverse polarity.

• 3 wires NPN or PNP output
• Extended operating distance
• LED indicator
• Cable, M8 or M12 connector
• Shielded or Non-shielded models

The DPRI magnetic proximity switch incorporates a sealed reed switch and four magnets inside a compact housing. This self-contained proximity switch requires no external power supply and can detect the presence of magnetic objects without contact.

• Lightweight, compact design reduces mounting space requirements
• Compact size allows units to be mounted in close proximity to each other
• Sealed reed contact can be used in dusty locations
• Long life and high reliability

Whether we have DPRI magnetic proximity switch in stock in Boise Idaho or need to ship direct from Infra Datalogic Italy to any USA cities; CTi Automation can get IS-08 series 8mm barrel inductive sensor to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some IS-12 series 12mm barrel inductive sensor products enabling us to further assist you in finding the correct IS-18 series 18mm barrel inductive sensor in the USA, Canada, or Mexico. It will be very helpful if you have the IS-30 series 30mm barrel inductive sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for IS-04 series that you are looking for in seconds. If you do not have the part numbers for IS-05 series 5mm barrel inductive sensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.