Datalogic Group
Home > Products
> Datasensor > Temperature Controllers
|
The wide range of auxiliary functions available completes the excellent performances offered by the
microprocessor-based controllers of the THE series, with standard 48x96 mm format and single and double display versions.
The main PID control action adjusts itself automatically to the optimum parameters with the AT initial autotuning, or
with the ADT permanent autoadaptive function; while the auxiliary outputs can be programmed on 16 different alarm
functions or fixed points. The LFA diagnostic function is able to detect failures along the entire regulation loop, from
the sensor to the actuator; moreover the regulation can be either automatic (closed loop) or manual (open loop), setting
the output percentual value. The complete programming of the controllers is made through the front panel, with the
possibility of including a 3 level software safety lock.
- Main control output with 1 or 2 auxiliary output
- PID action with AT autotuning and ADT autoadaptive function
- Complete diagnostic of the regular loop
- Automatic or manual regualation of the output
|
 THE Series |
|
If you are looking for Datasensor Temperature Controllers, please call us at (800) 894-0412
or Email us at info@ctiautomation.net
we will do our best to help you find the Datalogic Thermocouples that you are looking for at the most competitive prices
possible. If you are searching for Datasensor Resistance Temperature Detectors technical information (data-sheets) please use
the datasheets or product selection guide page links.
|
|
The TH-T temperature controller series offers a complete range of solutions able to satisfy many varied
industrial automation needs, including basic models suitable for more simple and cost-effective applications and advanced
models created specifically for the more evolved control and interface systems. Programming of the temperature controllers
is quick and easy as the most frequentlyused configurations can be set with few keyboard operations. Models with a RS485
serial interface can send the parameter configuration and receive the controlled values through an industrial PC that can
control different units. Versions with a current transformer input, available as an accessory for measurements reaching 25
or 100 A, can detect even a partial load failure, as for example due to a broken heating element. The series includes models
with opto-isolated relay and transistor outputs to control static relays, as well as models with 4-20 mA or 0-10 V
normalised proportional analogue outputs.
|
 TH-TD & TH-TS Series |
|
The microprocessor-based controllers of the THQ series are characterised by remarkable regulation
precision, in particular in heat-sealing and thermoforming operations typical of the automatic packaging. The AT initial
autotuning and the ADT permanent autoadaptive functions can both be activated through the PID control action, responding
excellently to frequent or fast system variations, as for example in process start and stop. The panel with single or
double display allows the setting of all the controller's values and configurations, such as sensor input, control action
and alarm functions, with the possibility to lock the programming on three different safety levels. The exclusive LFA
diagnostic function is able to detect failures along the entire regulation loop, for example thermocouples short-circuit
or heating resistance breaking.
- Excellent measurement precision and regulation stability
- 9 sensors, 4 control actions, 16 alarms all keyboard configurable
- PID action with AT autotuning and ADT autoadaptive functions
- LFA diagnostic function of the regulation loop
|
 THQ Series |
|
The analogue controllers of the LB series have been specifically designed to guarantee simple and
immediate use, with optimal performances in all temperature control applications. The setting of the operating point is
obtained by means of a knob on the scale graduated from 0 to 100, 200, 250, 300, 500 °C, according to the model with
indications of the values also in °F. Different versions are available with input for Pt100 resistance temperature
detectors and for J type Iron-Constantan thermocouples. The control action can be set as proportional or on/off by a
jumper on the connection; the output is with a changeover relay and the power supply is 115/230 Vac. The dimensions, in
the standard 48x48 mm format, are extremely compact and the mounting can be on panel using the fixing bracket supplied,
or inside cabinet on a DIN rail socket.
- Knob setting on dual °C and °F scale
- Models for Pt100 and J thermocouples
- Selectable proportional or on/off control action
- 115/230 Vac versions with relay output
|
 LB Series |
|
The TC/TR series offers thermocouple and RTD temperature sensors for measurements ranging from -100 to +450
°C, or up to 600 °C for the T101-J model. The J type (Iron/Constantan) or K type (Chromel/Alumel) thermocouples present a
tubular stainless steel housing or with brass ring; the measurement junction is grounded in order to obtain the best response
speed. The resistance temperature detectors are made with a Pt100O/0°C type platinium sensistive element and are available in
different tubular housings, with chamfer point for penetration measurements, or holed for detection in open air; in stainless
steel in all cases, with an insulated sensitive element. The thermocouples and the resistance temperature detectors of the
TC/TR series are suitable for applications in automatic packaging, food sector, plastic material printing and wood
working.
|
 TC/TR Series |
|
Whether we have THQ series controller in stock in Boise Idaho or need to ship direct from Datalogic
Italy to any USA cities; CTi Automation can get E series controller to you fast and save you some money. Our industrial
factory automation supplies distributors warehouse stocks some TH-TD series temperature controller products enabling us to
further assist you in finding the correct LB series analog controller in the USA, Canada, or Mexico. It will be very
helpful if you have the TC/TR series thermocouple part numbers ready, then our sales representatives can provide you with
a pricing and availability quote for TH-TS temperature controller that you are looking for in seconds. If you do not have
the part numbers for THQ series controllers, our application engineers will be able to help you figure out the part numbers
and get the price quote to you as soon as possible.
|
|
|
 |
|
|
Can't find a part number?
E-mail Us. |
Kubler Controller
The Codix 564
temperature controller displays temperature values in high resolution. In addition it can monitor and control 2 limit values. All
current temperature sensors, such as thermocouple types B, E, J, K, N, R, S and T, as well as mV inputs, Pt100 and resistance
inputs, can be connected to the device. These fast displays set new standards when it comes to user friendliness.
|
Panasonic Controller
The KT7 Series is a Size 22.5
x 75 x 100mm (WxHxD) temperature controller, Front screw terminals, DIN rail mounting type, Analogue value converter function.
Panasonic offers a broad line of highly flexible controllers for use as temperature controllers with PID, analog signal
conditioners with scaling and panel meters with a very bright and easy to read display.
|
|
|