(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

The new SAFEasy SG2 light curtains represent the natural evolution of the SF2 series. The new SG2 series offers two models, SG2-B "Base" and SG2-E "Extended", thus guaranteeing compatibility with the SF2 series (SG2-B), as well as offering advanced functions for a Type 2 safety light curtain, such as EDM and Anti-Interference (SG2-E). Models with controlled heights ranging from 150 to 1800 mm are available, all with an operating distance reaching 19 m. The response times ranging from 8 to 24 msec result to be amongst the lowest on the market, consenting the installation of the product nearer to the dangerous area. As well as offering the base functions present in the SG2-B model, the SG2-E series integrates advanced functions for a Type 2 device such as manual/automatic Restart, EDM function, Anti-interference system (obtained thanks to the reduction to 9 m of the maximum operating distance). All selectable functions. The new profile and rotating fixing brackets ease installation and the alignment of the emitting and receiving units, even at long distances and in applications with deviating mirrors. The SG2 series represents the ideal solution for all the typical applications of a Type 2 safety light curtain.

If you are looking for DataSensor Safety Light Curtains, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Infra Safety Screens that you are looking for at the lowest prices possible. If you are searching for DataSensor Light Curtain technical information (data-sheets) please use the DataSensor Datasheets OR Product Selection Guide page links.

The new series of SAFEasy SG4-B FINGER safety light curtains widens the existing SG range, whilst representing an evolution of the SE4-PLUS line, offering a Type 4 safety light device for finger protection with base functions. Ideal for applications that do not require complementary functions such as Muting, Cascade and blanking. The new SG4-B series has been especially developed to simplify:

• Installation (new rotating TOP-BOTTOM fixing brackets to ease alignment);
• Connection (use of standard connectors, no connection between emitter and receiver necessary);
• Configuration (no external control units and / or supplementary cables necessary);
• Use (alignment guided by a 7 segment double display on both units).

Improved response time and operating distance, respect to the SE4-PLUS series distinguish this series and make it one of the best performing light curtains available today on the market.

The SAFEasy DataSensor Safety Light Screens, conforming with the IEC 61496-1 and IEC 61496-2 standards, are particularly suitable for body protection of operators exposed to risk. The device is composed of a SE4-RA1 active unit, contained inside a sturdy aluminium profile and a SE4-RDB passive unit developed with integrated reflectors, or with 2 Infra SE4-RSM deviating mirrors supplied as accessories. The detection height is 500 mm and the operating distance reaches 7.5 m for the linear version or 3 m for the "L" and "T" versions. The Restart, Muting, EDM and Muting time-out functions are integrated and selectable through the dip-switches present in the active unit. "L" or "T" shaped versions are available for applications requiring the Muting function, equipped with one or two active bars with integrated retroreflective sensors on one side and one or two passive bars with integrated reflectors on the other side.

DataSensor is the first and unique manufacturer to offer this patented solution on the market. The DataSensor SE4-R Light Curtains represent a reliable and cost-effective alternative to light curtains with active units on emitter and receiver sides thanks to reduced costs and installation time as well as the advantage of cabling only the active unit. The SAFEasy DataSensor Light Curtains, according to the IEC 61496-1 e IEC 61496-2 standards, are suitable for detecting the human body when approaching dangerous areas. Models with different standard heights (500, 800, 900, 1200 mm), with 2, 3, 4 beams and operating distance reaching 50 m are available. Specific dip-switches, that can be reached through a slot present on the front of the receiver protected by a lid and opened with a simple screwdriver, guarantee rapid and safe device setting. The operator is thus able to configure, according to the specific needs, the manual or automatic Restart, as well as the Muting and partial Muting functions. The emitter-receiver units are optically synchronised and contain all the control circuits, inputs and outputs inside the housing.

The SAFEasy DataSensor Safety Light Curtains of the SF2 series, according to the IEC 61496-1 and IEC 61496-2 standards, are very suitable for hand protection of operators exposed to risks. Different models are available with ten standard heights ranging from 150 to 1500 mm, 30 mm resolution and an operating distance reaching 15 m. The emitter and receiver units are optically synchronised and contain all the control circuits, test input and two safety outputs inside the housing. The connection with the machine stopping circuits are guaranteed by unshielded M12 4-pole connectors for the emitter and M12 5-pole connectors for the receiver. The DataSensor SAFEasy light curtains of the SF2 series have also integrated the test function, automatically activated every 0.5 seconds, without stopping the machine's working cycle. A wide range of industrial applications, requiring operator safety, can be solved by Infra SAFEasy light curtains, thanks to the extremely compact dimensions (31x32 mm), easy installation and excellent performances.

The DataSensor SAFEasy Light Screens, according to the IEC 61496-1 e IEC 61496-2 standards, are suitable for hand protection of operators exposed to risks. Different models with eleven standard heights ranging from 150 to 1650 mm, 35 mm resolution and an operating distance reaching 15 m are available. The Infra SAFEasy Safety Light Curtains, according to the IEC 61496-1 e IEC 61496-2 standards, are suitable for finger protection of operators exposed to risks. Different models with six standard heights ranging from 150 to 900 mm, with 14 mm resolution and operating distance reaching 6 m are available. The SAFEasy DataSensor Light Curtains, according to the IEC 61496-1 e IEC 61496-2 standards, are suitable for hand protection of operators exposed to risks. Different models with eleven standard heights ranging from 150 to 1650 mm, with 20, 30 and 35 mm resolutions and operating distance reaching 15 m are available.

The SAFEasy SE4-Hand Series DataSensor Light Curtains, according to the IEC 61496-1 e IEC 61496-2 standards, are suitable for hand protection of operators exposed to risks. Different models with eleven standard heights ranging from 150 to 1650 mm, with 20, 30 and 35 mm resolutions and operating distance reaching 15 m are available. The operator is thus able to configure, according to the specific needs, the manual or automatic Restart, as well as the Muting and partial Muting functions. The emitter-receiver units are optically synchronised and contain all the control circuits, inputs and outputs inside the housing.

The SAFEasy DataSensor Light Curtains, conforming with the IEC 61496-1 and IEC 61496-2 standards, are Type 4 safety devices according to EN 954-1 and are particularly suitable for body protection of operators exposed to risk. The safety light curtains of the SE4T-L MUTING series satisfy all applications that require the Muting function, thanks to the use of pre-assembled, pre-cabled and pre-aligned Muting sensors. Models with 'T' integrated Muting sensors for two-way Muting, 'L' integrated Muting sensors for one-way Muting and linear versions without integrated Muting sensors are available. Infra Models with 2 and 3 safety beams with 500 and 800 mm detection heights offer 3 m operating distance for 'T' and 'L' shaped versions, or 25 m operating distance for linear versions. Specific dip-switches, that can be reached through a slot present on the front of the receiver unit, protected by a lid and opened with a simple screwdriver, guarantee rapid and safe device setting.

The user can configure the manual or automatic Restart, L or T Muting mode, a 10' or infinite Muting time-out as well as the EDM function. All models are equipped with a luminous Muting signalling lamp built-in on the top of the receiving unit. The compact dimensions (35 x 40 mm), patent-covered, easy installation and excellent performances make the SAFEasy DataSensor light curtains particularly suitable for applications that require material passage through a dangerous area, as for example in pallettisers/depalettisers. The SAFEasy DataSensor Light curtains, according to the IEC 61496-1 e IEC 61496-2 standards, are suitable for detecting the human body when approaching dangerous areas. Models with different standard heights (500, 800, 900, 1200 mm), with 2, 3, 4 beams and operating distance reaching 50 m are available.

Specific dip-switches, that can be reached through a slot present on the front of the receiver protected by a lid and opened with a simple screwdriver, guarantee rapid and safe device setting. The operator is thus able to configure, according to the specific needs, the manual or automatic Restart, as well as the Muting and partial Muting functions. The emitter-receiver units are optically synchronised and contain all the control circuits, inputs and outputs inside the housing. The DataSensor SAFEasy Light Curtains have also integrated the test function, automatically activated every second, without stopping the machine's working cycle. A wide range of industrial applications, requiring operator safety, can be solved by the SAFEasy Infra Safety Light Curtains, thanks to the extremely compact dimensions (35x40 mm) and easy connection and installation. The Sx-F/G-ST series DataSensor emitter-receiver photocells are homologated to be connected to the safety control units of the SB-BWS-T2 and BWS-T4 series and together form a respectively Type 2 and Type 4 safety system conforming with the EN 954-1 Standard.

The special characteristics of these photocells, immediately identified by the yellow-coloured data label, mainly consist of the reduced beam's effective aperture angle and in the presence of a test input, complying with the EN 61496-2 Standard. Different Infra photocells are available: a tubular M18 format either in the plastic S5 series version or metal S10 version with operating distances reaching 8 m, a glass-fibre reinforced plastic parallelepiped format of the S30 series with distances up to 50 m and a tubular M18 plastic format with laser emission of DataSensor SL5 series for distance reaching 40 m. M12 connector versions are available as well as 5 m shielded cable versions for S5, S10 models and terminal block for S30 models. LEDs signalling the operating status and the correct alignment of the safety devices are present on the photocells.

The SAFEasy Infra Light Curtains Series SE4-Plus, according to the IEC 61496-1 and IEC 61496-2, are particularly suitable for finger protection of operators exposed to risks. Different models are available with heights ranging from 150 to 1200 mm, 14 mm resolution and operating distance reaching 6 m. Each model has one or more advanced functions: EDM, Blanking and Cascade. The light curtains are able to verify the integrity of external monitoring devices thanks to the EDM (External Device Monitoring) function. The Blanking function allows to deactivate a part of the detection area during functioning, allowing material passage or mechanical obstacle presence without causing machine interruption. Fixed Blanking and Floating Blanking can be selected. The Cascade configuration allows to combine the functioning of a couple of light curtains positioned in different areas. The compact dimensions (35 x 40 mm), easy installation and excellent performances make the SAFEasy light curtains suitable to industrial applications requiring operator safety.

Whether we have DataSensor Safety Light Curtains in stock in or need to ship direct from Infra DataSensor to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get DataSensor Light Screens to you fast and save you some money. For a list of frequently asked questions or how to instructions, please use DataSensor FAQs page link. If you are looking for Datasensor User Manuals, please follow this link.

Our Infra DataSensor distributors warehouse stocks some Safety Light Curtains products enabling us to further assist you in finding the correct Photo Electric Safety Devices in the USA, Canada, or Mexico. It will be very helpful if you have the Infra Safety Screens part numbers ready, then our sales representatives can provide you with a pricing and availability quote for DataSensors Light Curtains that you are looking for in seconds. If you do not have the part numbers for Infra DataSensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.