(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Datasensor S7 fiber-optic amplifier has been enhanced with the introduction of new models with white light emission and 10kHz switching frequency (corresponding to only 50µs response time). These new devices are exceptionally precise, fast and suitable for functioning as Fiber-Optic Contrast Sensors in print registration applications. The sensor alignment, setting and functioning are easily managed through the 4-digit display present on the panel together with the setting and configuration keys. All the following functions and parameters can be configured using the keyboard: delay timing at output deactivation selectable from 0, 5, 10, 20 or 40ms; normal (500us/1kHz) or fast (50us/10kHz) response time; dark or light operating mode; display orientation for reading from right or left sides; and display with either continuous powering or power-save function.

When used as a print registration sensor, the new S7 model DataSensor Fiber Sensors with white light emission perform at their best when combined with Coaxial Proximity Fiber-Optics Such As The OF-36-ST-20 Model & The Extra-Flexible OF-36-XF-20 Model. When the light spot needs conditioning, the OF-44-ST-20 model and the extra-flexible OF-44-XF-20, can be fitted with the AF-3 (19mm distance and 4mm resolution) and AF-4 (7mm distance and 0.4mm resolution) focusing lenses.

If you are looking for Datasensor Photoelectric Sensors, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Infra International Photo Electric Proximity Switches that you are looking for at the lowest prices possible. If you are searching for DATALOGIC Photoelectric Sensor technical information (data-sheets) please use the Datalogic Photoelectric Datasheets OR Product Selection Guide page links.

The S300 series of advanced MAXI photoelectric sensors represents the most suitable solution for critical applications thanks to excellent performances and resistance in harsh working conditions. The new series offers a wide range of models and functions in order to guarantee easy use and installation. The new series presents 4 different models with through beam optical function up to 60m, polarized retroreflex at 22m, diffused proximity at 5m and background suppression at 2.5m. All the models are available both VDC from 10 to 30V and VAC/VDC free-voltage from 24 to 240V versions. A timing function version and with both the SPDT relay or the bipolar transistor NPN/PNP open collector outputs is offered. The Terminal Block Connection simplifies and speeds-up the installation procedure, whereas the heavy-duty plastic housing guarantees excellent resistance under harsh use conditions.

The new S2Z Maxi series offers 4 models, with basic optic functions:

• through beam
• polarized retroreflex
• diffuse proximity
• background suppression

Versions with continuous and freevoltage Vac. Adjustable timing versions are also available. SPDT relay and bipolar transistor NPN/PNP open collector outputs are also offered. Terminal block connection simplifies and speeds-up installation. The heavy-duty plastic housing guarantees excellent resistance in the most severe working conditions.

The TL50 Datasensor contrast sensor line offers the best solution for all the applications where cost reduction is requested, without compromising the excellent detection performances. The optimised optics of these sensors, the RGB LED emission with automatic colour selection and the very fine resolution, allow the detection of the weakest contrast of colours or grayscale between mark and background, or between different objects or surfaces. The high resolution is not a limit for the detection speed, reaching 33 ms response time and 15 kHz switching frequency. Thanks to only two 'Mark' and 'Bkgd' push-buttons for the different signal acquisition, the automatic threshold setting is very easy and accurate. TL50 sensors can find typical applications on packaging machinery for food, cosmetic or pharmaceutical goods, for the detection of print registration marks, labels or other references on plastic films or packages, even on transparent material.

The DataSensor SL5 laser switches, thanks to the laser emission concentrated in a thin light beam, represent the ideal solution for the detection of very small objects or to reach very long operating distances. Precise detections with decimillimetre resolutions can be obtained with the proximity model at an operating distance ranging from 0 to 35 cm. High operating distances can be reached with the 12 m polarised retroreflex model, or with the 60 m through beam model; high-resolution detections at shorter distances can be effected also. The visible red emission is generated by a Class 1 laser according to the EN 60825-1, guaranteeing the maximum safety in all applications.

Datasensor Luminescence Sensors emit ultraviolet (UV) light and receive visible light reflected from luminescent surfaces. This technology allows the detection of fluorescent marks (even invisible to the human eye) on any object independently from its material, colour or distance inside the operating range. Moreover, it avoids light interferences or reflections from non-luminescent surfaces, like glass, mirrors, shiny metal surfaces, etc. Luminescence sensors can satisfy many different applications, as for example in pharmaceutical and cosmetic industries to detect labels on glass phials or bottles, or correct medicine packaging, in woodworking and ceramic tiles production to check fluorescent selection marks; in automatic packaging to detect whitened paper or fluorescent glues, in textile industry to identify fluorescent cutting guides or labels; in mechanical industry to verify fluorescent paints, lubricants, gaskets or fittings; in vending machines or cash dispensers to check banknotes and credit cards. The high power and definition of the LD46 sensor light spot enable the detection of critical targets with a very poor or non-homogeneous or discontinued luminescent level, as for example on raw wood, corrugated carton, fabric, ceramic tiles.

The S65-V DataSensor color switches offer the best performances for color detection in a standard 50x50x25 mm compact housing. The Infra S65-V0 model, thanks to a good response time of only 340 µs, results to be particularly suitable for automatic packaging applications where high speed and color mark detection are necessary. The S65-V1 model DataSensor Color Sensor increases the chromatic sensitivity of S65-V0 towards dark colours, allowing to distinguish even slight tone differences, useful in quality control and part checking, at inferior process speed. The Infra sensors can memorise and recognise 3 colors on 3 independent channels. The C (chromaticity) or C+I (chromaticity and intensity) detection algorithm and the tolerance level can be chosen for each color. The 0 to 40 ms delay programming is the same for each channel. The auxiliary functions include keylock and synchronisation with external events through a specific input.

The S80 series DataSensor Distance Sensors, in the compact sturdy metal housing, offers innovative class 2 laser distance sensors with time of flight measurement. This technology, based on the measurement of the time between the emission and receipt of the laser light pulses, effects accurate distance detection. The S80-Y0 and S80-YL0 DataSensor Distance Sensors function as proximity on respectively a 0.3 to 4 m distance, or from 0.3 to 7 m with scalable range, in object positioning or detection applications, for example as double-threshold background suppression on long distance. The S80-Y1 and S80-Y2 DataSensor Distance Sensors, with operating distances reaching 20 or 100 m, function as retroflex measuring the distance from a reflector mounted on the object to detect and are ideal for position applications in automatic warehouses or material handling lines in general. All Infra Distance Sensor models have two switching outputs, available in both the NPN and PNP models, that can be set at different distances, while the measurement value is supplied on the 4-20 mA analogue output and RS485 serial interface; the latter can be also used to set all the parameters.

The S60 series Datalogic Automation photoelectric switches, standard 50x50x15 mm compact housing, offer all the most advanced optic functions, as well as the universal, available with safety class 1 laser emission. The series presents a complete range of models, including retroreflex with coaxial optics and polarisation filters for the detection of shiny and/or transparent objects, background and foreground suppression, contrast sensors with white light emission for the detection of colored marks, the compact photoelectric sensor with UV emission for the detection of luminescence references and the distance sensor with analogue output. The basic DataSensor models for presence detection present trimmer sensitivity adjustment, while the models with the advanced optics are microprocessor controlled and have the patent-covered EASYtouch setting, which gives rapid and precise setting of the switching threshold, with the possibility of remote control, keyboard block and selection of the output delay function.

The S62 series Datasensor universal compact sensor has been especially developed in the 50x50 housing with 18 mm width to obtain the maximum performances in the main optic detection functions for industrial automation. The background suppression Infra Sensor models reach 30 cm with visible red emission, or 60 and 120 cm with infrared emission. All versions present 6-turn mechanical trimmer adjustment of the operating distance and high immunity against the colour differences in objects to detect or suppress, even with very shiny targets. The polarised retroreflex, besides the maximum operating distance that reaches 10 m, has to be highlighted for the high excess gain and absolute immunity against reflections on more shiny surfaces, even if irregular or with mirrortreatment.

Built in a 50 x 50 mm standard compact housing, Datasensor S65-Z series offers a retroreflex line sensor for accurate measurements of the centre or edge position and width of objects. This series results to be particular suitable for a wide range of industrial automation applications, such as packaging, printing assembling on automatic machines. The detection is made on a reflecting tape, supplied with the sensor, positioned behind the object, with a 150 mm maximum measurement field width and a 200 mm operating distance. The 4-20 mA analogue output is proportional to the measurement, while the digital output, PNP or NPN according to the model, is activated when the measured value is included inside the interval fixed by the operator via teach-in. An alarm signal is activated when the luminous intensity received is weak, as for example in presence of dirty lenses. The setting is accomplished through three push-buttons present on the control panel, together with the output status LED, two LEDs signalling the operating mode, an alarm LED and a 4-digit display for the visualisation of the measurement and sensor configuration messages. Models with the RS485 serial interface offer the remote setting of all the programmable functions as well as the transmission of the measurements to an industrial PC are available. The electrical connection is made through a standard M12 8-pole connector.

The main characteristic of the new Datasensor M18 tubular S15 sensors is the housing length of only 40 mm, especially suitable for applications with reduced space. The new S15 series is available with cable output, in order to maximise the concept of 'reduced dimensions' as well as to offer contemporaneously the best installation flexibility. The S15 series is supplied without the sensitivity adjustment trimmer to ease and speedup installation. This feature drastically reduces the possibility of allowing the operator to modify the sensor's performances and so guaranteeing major reliability and productivity. The main optic functions used in the industrial market are available, polarised retroreflex, non-polarised retroreflex, diffuse proximity and through beam. These sensors are ideal for the most critical applications with harsh environmental conditions thanks to the IP69K mechanical protection.

Datasensor S12M series includes a basic line of photoelectric sensors developed in the standard tubular M12 format. The diffuse proximity is available in different versions: a 10 cm fixed operating distance model with visible red emission, or a model with trimmer adjustable distance from 0 to 30 cm and infrared emission. The sensitivity adjustment trimmer and visible red emission characterise the 1 m polarised retroreflex models and the 5 m through beam models. A yellow LED indicating the activation of the PNP output is present in all models. The tubular metal housing includes the M12 connector inside one single block, guaranteeing reduced dimensions and the maximum protection degree.

Datasensor SM123 series offers a complete line of subminiature amplified photoelectric sensors, ideal for mounting in reduced spaces or in presence of particular mechanical obstacles. The extremely compact dimensions do not limit the detection performances, that suit most of the applications on automatic machinery for packaging, assembling, printing and so on, such as in automatic distribution and vending machines. The SM1 models are 20 mm fixed focus proximity that, thanks to the thin housing with side optics, represent a valid alternative to fibre-optic systems. The SM2 models present instead an ultra-flat format with a thickness inferior to 5 mm and offer a 170 mm diffuse proximity, as well as a through beam with an operating distance reaching 1.2 m. The SM3 models also present a thin housing with lateral optics, but offer a 50 cm coaxial polarised retroreflex or a 1.2 m through beam optic function. All the subminiature sensors of the SM123 series have visibile red emission and are available in the NPN or PNP versions, both with 3 wires 2 m cable connection. The plastic ABS housing guarantees an IP67 protection degree.

The new SMall series offers a complete line of subminiature amplified DataSensor Photoelectric Sensors, ideal for mounting in reduced spaces or in presence of particular mechanical obstacles. The extremely compact dimensions and wide detection field of all modes suit most of the applications on automatic machinery for packaging, assembling, printing as well as in automatic distribution and vending machines. The SMall series offers many different optic functions including 1.5 m retroreflex, 1 m polarised retroreflex, and 2 m through beam. The 15 mm, 20 mm, 30 mm and 50 mm fixed focus photoelectric proximity models represent a valid alternative to fibre-optic systems and can be used to detect objects with small profiles and poorly reflective materials. All models of the subminiature SMall series DataSensor Photoelectric Sensors have visible red emission facilitating alignment, cable connection and are available in the NPN or PNP versions with NO-NC double output. The plastic housing guarantees an IP67 protection degree.

The DataSensor Photoelectric Sensors of the S40 series, in the innovative miniature housing, offer all the main optic functions with the advantages of microprocessor control and automatic Teach-in and Remote setting with EASYtouch procedure. The series includes different models: 30 cm diffuse proximity and 10 cm background suppression, 4 m retroreflex, 3 m polarised retroreflex, or 0.7 m version for the detection of transparent glass or PET objects, 6 m through beam models, all with visible red emission. The laser emission is available for retroreflex, proximity and background suppression, offering very high resolution detection. The sensitivity and operating distance setting are obtained by simply pressing the button, or by cable to allow remote control and the mounting in small or difficult to reach areas. The output can be either PNP or NPN, with cable or M8 connection, depending on the photoelectric sensor model.

The S10 series DataSensor Photoelectric Sensors, in a practical and sturdy tubular M18 metal housing, suits the more difficult applications in the mechanical or food industries. The IP69K mechanical protection guarantees resistance to washdown with water jets at high temperatures reaching 80°C and pressure reaching 100 bar. Moreover, AISI-316L stainless steel versions are available for a major resistance towards chemical agents and aggressive detergents as well as to acid corrosion. The lens in PMMA plastic offers the possibility of mounting a glass MEK-proof protection. A reflector with IP69K mechanical protection is available for the retroreflex versions. The S10 series Infra Photoelectric Sensor includes adjustable proximity versions reaching 10, 35 or 60 cm and 14 mm fixed focus proximity, 4 m retroreflex and 3 m polarised retroreflex, 1 m retroreflex for transparents as well as 8 m through beam models. The M12 connection requires only 3 wires for power supply and NPN or PNP output.

The S90 series DataSensor Photoelectric Sensors, in a compact 41x49x15 mm metal housing, offer all the application and universal optic functions also with safety class 1 laser emission. The series includes polarised retroreflex models with coaxial optics for the detection of reflective and transparent objects, background and foreground suppression versions, contrast sensor with white light emission for colour mark detection, ultraviolet sensor for luminescent object detection. Basic models are available with class 1 laser emission for high-resolution detection. The S90 DataSensor laser sensor models with universal proximity, retroreflex and through beam optic functions have trimmer sensitivity adjustment. More sophisticated models are microprocessor controlled and offer the patent-covered EASYtouch setting procedure for rapid and precise automatic setting of the switching threshold, with remote control, keyboard lock and output delay activation functions.

The DataSensor S50 series photoelectric sensors offer all optical functions within a M18 housing. With the universal sensing functions of proximity, polarised retroreflex and through beam, which are also available with class 1 laser emission, as well as the more advanced functions of background suppression, background/foreground suppression, analogue displacement, contrast and luminescence, Infra S50 really is one housing for all applications. The S50 DataSensor Photo Electric Sensor setting is carried out-by either by potentiometer, which is sealed to IP67, or using the patented EASYtouch push-button teach system, which gives rapid and precise automatic setting of the switching points. The Infra S50 series is available both in flat plastic format ideal for M18 nut or screw mounting through the sensor body, as well as a cylindrical metal housing.

Datasensor CS series offers high-quality connectors, developed to guarantee maximum reliability with particularly compact dimensions in the standard M8x1 and M12x1 formats, can be used to connect photoelectric sensors as well as inductive or capacitive proximity sensors. The M8 and M12 connectors offer either an axial or radial shape; wired with a 4-pole normalised configuration, with 3, 5, 7 or 10 metre cable. Moreover, the M12 connectors are available in other versions with a 3-pole normalised configuration for a normally open output, or with a yellow PNP output LED and a green power LED. The connector body is in PUR plastic and the cable in PVC with CEI 20-22 flammability class.

Whether we have Datalogic Photoelectric Switches in stock in or need to ship direct from Infra DataSensor to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); CTi Automation can get DATALOGIC Photo Electric Sensors to you fast and save you some money. For a list of frequently asked questions or how to instructions, please use DATALOGIC FAQs page link. If you are looking for DATALOGIC User Manuals, please follow this link.

Our Infra DataSensor distributors warehouse stocks some Photoelectric Sensor products enabling us to further assist you in finding the correct Proximity Switches in the USA, Canada, or Mexico. It will be very helpful if you have the Infra Photoelectric Sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for DataSensors Photoelectric Sensors that you are looking for in seconds. If you do not have the part numbers for Datalogic Switch, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.