(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

The TL50 Datasensor Contrast Sensor line offers the best solution for all the applications where cost reduction is requested, without compromising the excellent detection performances. The optimised optics of these sensors, the RGB LED emission with automatic colour selection and the very fine resolution, allow the detection of the weakest contrast of colours or grayscale between mark and background, or between different objects or surfaces. The high resolution is not a limit for the detection speed, reaching 33 ms response time and 15 kHz switching frequency. Thanks to only two 'Mark' and 'Bkgd' push-buttons for the different signal acquisition, the automatic threshold setting is very easy and accurate. TL50 sensors can find typical applications on packaging machinery for food, cosmetic or pharmaceutical goods, for the detection of print registration marks, labels or other references on plastic films or packages, even on transparent material.

If you are looking for DataSensor Contrast Sensors, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Infra Datalogic TL50 Contrast Sensors that you are looking for at the lowest prices possible. If you are searching for DataSensor TL46 Contrast Sensor technical information (data-sheets) please use the DataSensor Datasheets OR Product Selection Guide page links.

The new DataSensor digital contrast sensor line of the TL46 series is characterised by excellent performances in terms of resolution, definition and precision of the light spot emitted by RGB LEDs, low response time and high switching speed. The sensor, developed in a sturdy metal housing with standard fixing, is available in 3 different versions able to better satisfy all applications offering avantgarde technology at the best price/performance ratio. The TL46-W DataSensor Contrast Sensor basic version has only one set push-button, 2 LEDs indicating respectively the output status and sensor acquisition condition. The performances and use ease have be optimised and offered at a competitive price. The TL46-WL standard version has set 3 push-buttons, 4 LEDs signalling the output status, sensor acquisition condition, delay output activation and push-button activation.

Datasensor S65-W series offers, in a sturdy standard compact 50x50 mm ABS housing with IP67 mechanical protection, an advanced contrast sensor for the detection of register marks and other neutral or coloured targets. The state-of-the-art technology with wide-spectrum white LED emission guarantees the detection of all contrasts, such as marks or objects very similar to their backgrounds or in presence of different surface treatments or workings. The control panel presents three Push-Buttons for easy and immediate setting and a 4-digit display that indicates the configuration parameters and the level of received signal without the need of connecting external devices.

Datasensor TLµ series offers the most reliable and innovative solutions for all detection applications of register marks and other neutral or coloured references. The microprocessor-based setting can be either "Teach-in" using two push-buttons or "Remote" by cable with the possibility of rapidly memorising and recalling 4 different formats. The setting can also be dynamic and completely automatic in the models with the "Auto-Set" function. The LED emission can be red/green with automatic selection, or white offering the possibility of operating on all contrasts, also amongst same-coloured objects and backgrounds, presenting different surface treatments or workings. Models with interchangeable 9 mm or 18 mm lenses are available; 22, 28 and 50 mm lenses are supplied as accessories. Moreover many different fibre-optic models are available. The output is NPN or PNP according to the model, but is always selectable by means of an internal switch; an analog output proportional to the received light is also present.

Datasensor TL10 series is composed of analog contrast sensors with incandescent lamp emission with long life and easy interchangeability. The sensors present a mechanical multi-turn optic adjuster for the sensitivity regulation, a switch for the dark/light operating mode selection and a red LED that signals the NPN transistor output activation. Different models are available with 8, 28 and 50 mm lenses.

Datasensor TL80 series is composed of analog-based contast sensors with LED emission, distinguished by good depth of field and high switching frequency reaching 10 kHz. Switching threshold setting is aided by two arrow indicators showing the multiturn trimmer's rotation direction; moreover switches for the selection of the red or green emission, dark or light operating mode, NPN or PNP output and timing function are also present. Accessory lenses for different operating distances and various proximity and through beam fibre-optics extend the application possibilities. The sturdy metal housing guarantees IP67 protection.

DataSensor S50 series photoelectric sensors offer all optical functions within a M18 housing. With the universal sensing functions of proximity, polarised retroreflex and through beam, which are also available with class 1 laser emission, as well as the more advanced functions of background suppression, background/foreground suppression, analogue displacement, contrast and luminescence, Infra S50 really is one housing for all applications. The S50 DataSensor Photo Electric Sensor setting is carried out-by either by potentiometer, which is sealed to IP67, or using the patented EASYtouch push-button teach system, which gives rapid and precise automatic setting of the switching points. The Infra S50 series is available both in flat plastic format ideal for M18 nut or screw mounting through the sensor body, as well as a cylindrical metal housing.

Datasensor S6 series, thanks to the excellent detection performances and the variety of Power Supply and connection possibilities, offers the most complete universal sensor range in the compact 50x50 mm housing. The operating distance can be set to the optimal value in each model: 2 m diffuse proximity, 25 or 50 cm background suppression, 5 m polarised retroreflex, 1 m retroreflex versions for transparent objects and 20 m through beam. Proximity models with 5 to 20 cm foreground suppression and 12 to 110 cm background suppression are available. The free voltage versions have a relay output and cable connection. The versions with 10-30 Vdc power supply present cable connection and NPN/PNP output or M12 connector, with either PNP output with dark/light configuration and PNP double NO-NC output complying to the EN 60947-5-2 standard.

The S60 series DataSensor Photoelectric Sensors, standard 50x50x15 mm compact housing, offer all the most advanced optic functions, as well as the universal, available with safety class 1 laser emission. The series presents a complete range of models, including retroreflex with coaxial optics and polarisation filters for the detection of shiny and/or transparent objects, background and foreground suppression, contrast sensors with white light emission for the detection of colored marks, the compact photoelectric sensor with UV emission for the detection of luminescence references and the distance sensor with analogue output. The basic DataSensor models for presence detection present trimmer sensitivity adjustment, while the models with the advanced optics are microprocessor controlled and have the patent-covered EASYtouch setting, which gives rapid and precise setting of the switching threshold, with the possibility of remote control, keyboard block and selection of the output delay function.

The S90 series DataSensor photoelectric sensors, in a compact 41x49x15 mm metal housing, offer all the application and universal optic functions also with safety class 1 laser emission. The series includes polarised retroreflex models with coaxial optics for the detection of reflective and transparent objects, background and foreground suppression versions, contrast sensor with white light emission for colour mark detection, ultraviolet sensor for luminescent object detection. Basic models are available with class 1 laser emission for high-resolution detection. The S90 DataSensor Laser Sensor models with universal proximity, retroreflex and through beam optic functions have trimmer sensitivity adjustment. More sophisticated models are microprocessor controlled and offer the patent-covered EASYtouch setting procedure for rapid and precise automatic setting of the switching threshold, with remote control, keyboard lock and output delay activation functions.

The new Datasensor S8 series of compact sensors offers excellent detection performances, usually associated with sensors that have larger dimensions and a higher price. The S8 series is able to solve the most critical sensor applications. A solution for packaging lines, food and beverage industries, automotive, test and assembling machines and electronic plants. The first models introduced offer coaxial polarised Laser retroreflex, mechanical Laser background suppression, coaxial polarised LED retroreflex for transparent object detection and contrast sensors with RGB emission, coaxial optic and very high resolution in a compact housing. The Laser versions present extremely focussed spot inferior to 1 mm and switching frequencies that are amongst the highest on the market reaching 10 kHz. The retroreflex models supply great reliability and plant productivity thanks to an additional ALARM output for dirty lenses. The contrast sensor is the most compact sensor available today with RGB emission and coaxial optics. Connector M8 or M12 "pig-tail" versions are available.

Whether we have DataSensor Contrast Sensors in stock in or need to ship direct from Infra DataSensor to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get DataSensor S65-W Series Contrast Sensors to you fast and save you some money. For a list of frequently asked questions or how to instructions, please use DataSensor FAQs page link. If you are looking for Datasensor User Manuals, please follow this link.

Our Infra DataSensor distributors warehouse stocks some Contrast Sensor products enabling us to further assist you in finding the correct Contrast Sensors in the USA, Canada, or Mexico. It will be very helpful if you have the Datasensor Contrast Sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for DataSensors TL50 Series Contrast Sensors that you are looking for in seconds. If you do not have the part numbers for Infra DataSensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.