CTi Automation Logo
Loading
Home | Contact Us | Sitemap
(800) 894-0412

Danfoss

Home   >   Products   >   Danfoss VLT   >   AutomationDrive   >   FC300

Danfoss Drives

(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

VLT Automation Drive

The VLT AutomationDrive is a single drive concept that covers an entire range of applications, which is a major benefit in commissioning, operating and maintaining the equipment. The modular open-technology platform that VLT AutomationDrive is built on makes it exceptionally adaptable and programmable. Its configurable, user-friendly interface supports local languages and letters.

The drive solution can be adapted to any application due to the flexible option structure. Numerous options are available and can be mounted and tested from factory or be plugged in later for change-over or upgrade. VLT AutomationDrive has received the Frost & Sullivan award for innovation and the iF Design Award for its user-friendliness.

Danfoss VLT Modular AutomationDrives Distributors
VLT AutomationDrive

If you are looking for Danfoss Drives, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Danfoss FC 302 inverter that you are looking for at the most competitive prices possible. If you are searching for Danfoss Modular AutomationDrive VFD technical information (data-sheets) please use the datasheets or product selection guide page links.

The modular concept of VLT AutomationDrive makes it highly adaptable also to future features and options. Modularity offers the benefit of buying on a need-to-have basis without losing future possibilities. The Local Control Panel (LCP) can be plugged in directly or connected through a cable for remote commissioning. The LCP can be disconnected during operation and replaced with a blind cover. Settings are easily transferred via the LCP from one drive to another or from a PC to a drive with the VLT Set-up Software MCT 10.

Power Range

  • 3-phase 200V - 240V 0.25kW - 37kW
  • 3-phase 380V - 480/500V 0.37kW - 800kW
  • 3-phase 525V - 600V 0.75kW - 75kW
  • 3-phase 535V - 690V 37kW - 1200kW
  • Normal overload 45kW - 1400kW

690V VLT Automation Drive

Reduce system costs and achieve remarkable space saving benefits with high performance frequency converters that cover the complete power range from 1.1 kW - 1.4 MW. With the addition of 690V version of the VLT AutomationDrive, Danfoss can offer a complete range of compact, reliable and efficient 690 V drives for demanding productions with own power supply. The new series features drives that are among the smallest on the market up to 75kW.

Built on the powerful and reliable VLT platform, the drives offers system designers, builders and end users the efficiency enhancing benefits offered by Danfoss' single drive concept for industrial applications. Suitable for use on normal TN and IT (isolated) grids, the IP 20 protected drives are especially useful in installations within chemical, mining, water/wastewater and marine applications.

Danfoss 690V VLT AutomationDrives Distributors
690V VLT AutomationDrives

Fieldbus Options (A Options)

  • MCA 101 Profibus
  • MCA 104 DeviceNet
  • MCA 105 CanOpen
  • MCA 120 Profinet
  • MCA 121 Ethernet IP
  • MCA 122 Modbus TCP

I/O & Fieldbus Options (B Options)

  • MCB 101 General Purpose I/O
  • MCB 102 Encoder
  • MCB 103 Resolver
  • MCB 105 Relay
  • MCB 113 Extended Relay Card - NAMUR
  • MCB 107 24 V input option for control voltage

Enclosed VLT Automation Drive

IP 66/Type 4X enclosed VLT frequency converters cover the range from 0.25 to 90 kW, allowing for mounting near the motor in harsh environments. VLT AutomationDrive, VLT HVAC Drive and VLT AQUA Drive come in IP66/Type 4X versions covering 0.25 to 90 kW (normal overload). IP 66/Type 4X drives are suitable for installation in wash-down areas in food & beverage plants, as well as outdoor in wastewater plants or on rooftop airhandling units.

The drives are built to withstand harsh cleaning agents and corrosive air. IP 66/Type 4X drives can be installed directly at the processing equipment without the need for protective cover. All cast aluminium parts are powder coated with a strong epoxy coating. The corrosion resistance has been successfully tested with commonly used cleaning detergents. Protection against corrosive gasses complies with to IEC 60721-3-3 level 3C3.

Danfoss IP 66/Type 4X Enclosed VLT Inverters up to 90 kW Distributors
Enclosed VLT AutomationDrive

Power Range

  • 3-phase 200V - 240V 0.25kW - 45kW
  • 3-phase 380V - 600V 0.37kW - 90kW with 110% overload torque (normal overload)
  • 3-phase 380V - 600V 0.37kW - 75kW with 160/150 % overload torque (High overload)

For open mounting - like on a frame - a stainless steel back plate is available to guide the air from the fan through the rear heatsink. A watertight USB plug is available for mounting in a gland hole in the bottom of the drive. With this plug it is possible to commission the drive via the VLT Set-up Software MCT 10 without opening the drive. The drive must be installed under a suitable cover to protect from direct exposure to sun, snow and ice.

VLT Panel Optimised Drive

The installation volume and/or the mounting surface are reduced by up to 60% compared with previous series. The service sections nevertheless fulfil the highest requirements even for applications with high overload, long motor cables and ambient temperatures up to 50 C (55 C with derating).

Optimised efficiency and intelligent cooling technology make the compact and service-friendly design possible. Even equipment such as EMC filters, harmonics suppression and brake modules are integrated in the enclosure. The IP 20 series is designed for easy accessibility and time-saving installation. Mechanical fastening points are easy to access from the front even with automatic tools. All terminals are sufficiently dimensioned and clearly marked.

Danfoss VLT Panel Optimised Inverters in IP20 Enclosure Distributors
VLT Panel Optimised

One need only loosen a few screws to get to the terminals. Accessories for bonding of screened cables are included. The compact enclosures are easier to install. This is important especially within existing installations with poor accessibility. The IP 20 enclosed series completes the enclosure program of the modular VLT series with IP 21, IP 55 and IP 66 enclosures. They all completely support the modular platform of the VLT series. An extensive range of options and accessories is available, optimising the drive for the respective application.

Whether we have AutomationDrive FC 300 drives in stock in Boise Idaho or need to ship direct from Danfoss to any USA cities; CTi Automation can get drive in IP20 enclosure to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some FC300 VFD in IP55/IP66 enclosure enabling us to further assist you in finding the correct AutomationDrive with a mains switch in the USA, Canada, or Mexico. It will be very helpful if you have the VLT Motion Control Tool MCT 10 part numbers ready, then our sales representatives can provide you with a pricing and availability quote for FC 301 drives that you are looking for in seconds. If you do not have the part numbers for FC301 (A1-Enclosure) VFD, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

Datalogic Sensors

Datalogic Industrial Automation is an industry-leader in products and solutions for material handling, traceability, inspection and detection applications. The inductive proximity sensors belonging to the Metal Face line were made mainly for applications in extreme environments and cannot be solved with standard formats. Thanks to their stainless steel active face and the sturdy housing, they are able to withstand the shocks and