The Control Techniques MM55 AC brushless permanent magnet servo motor was designed to respond to the demands for a low cost high performance motor for use with the MiniAx servo controller. Being brushless there is no maintenance requirement and the laminated construction gives a very high torque/inertia ratio which is perfect for applications requiring high performance in a small space. Shaft performance feedback is through a standard incremental encoder. The Matador range of Control Techniques Servo Motors were specifically designed to operate alongside the Maestro drives.

If you are looking for Control Techniques Servo Motors, please call us at or email us at info@ctiautomation.net we will do our best to help you find the Emerson Unimotor Servo Motors that you are looking for at the lowest prices possible. If you are searching for Control Techniques Matador DC Servomotor technical information (data-sheets) please use the Control Techniques Datasheets OR Product Selection Guide page links.

Matador DC servomotors are compact with good dynamic performance and excellent smooth low speed performance. The high commutation power allows the Matador to meet acceleration requirements without limiting the current at upper torque and speed values. Optimum performance from a servo system is achieved by careful matching of motor and drive. Peak currents are adjustable from 50% to 100% providing excellent flexibility in varying applications.

The Control Techniques Unimotor range Servo Motors have been developed following extensive research and testing of thermal dynamic theories and practices. This range is available in five frame sizes 75; 95; 115; 142 and 190mm, in a unique and instantly recognisable finned design that offers extra strength, rigidity and thermal performance. These are important features for high performance servo systems. Designed to operate from switched-mode three-phase Control Techniques AC Drive outputs with DC link volts up to 750V DC, this range employs a registered UL approved insulation system. There are four basic motor types, each for different drives. UM, SL and DM motors are for 400/440V nominal AC drive supply voltage and are the subject of this UM, SL and DM Unimotor manual.

EZ series Control Techniques Servo Motors have identical mechanical construction and feedback options, but support a different winding to suit 220V nominal AC drives and are the subject of a separate EZ servo motor manual. The UM motor has been primarily designed to operate with the Unidrive. Feedback options include resolver; or incremental, sincos single-turn, sincos multi-turn optical encoders. The SL version is a UM motor fitted with special SLM technology electronic feedback that operates with M'Ax and MultiAx Control Techniques Servo Drives. This motor-drive combination offers extremely high resolution, for superb system speed control. High resolution is essential for many system applications where speed and position errors must be miniscule. The feedback comprises of a special Sincos encoder and SLM electronics, both contained within the standard UM outline. The encoder has a memory programmed with all the essential motor characteristics necessary to automatically set all M'Ax parameters, giving an instant "Plug and Play" capability.

The DM series Control Techniques Servo Motor is suitable for use with the DigitAx drive. The stator connections to U and V are interchanged to match the DigitAx. Gearboxes: motor torque can be extended by a good selection of factory-fitted gearboxes, available to order in a wide variety of options. Forced Air-Cooling: customer-fitted fan blown boxes specially designed to fit the range of motors, can directly enhance motor performance. (Not suitable for SL). Custom Specials: a range of special adaptations e.g. shaft or feedback type are already designed and may be available where quantities justify. Cable Assemblies: ready made power and signal cables in lengths of 2-100 metres to connect motors to the appropriate drive.

Whether we have Control Techniques Servo Motors in stock in or need to ship direct from Emerson Control Techniques to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get Control Techniques MM55 AC Brushless Permanent Magnet Servo Motors to you fast and save you some money.

Our Emerson Control Techniques distributors warehouse stocks some AC Servo Motor products enabling us to further assist you in finding the correct Emerson Matador DC Servo Motor in the USA, Canada, or Mexico. It will be very helpful if you have the Control Techniques Servo Motor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Control Techniques Unimotor High Performance AC Servomotor that you are looking for in seconds. If you do not have the part numbers for Control Techniques Brushless Servo Motors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.