(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

Jet Pump

Applications: Swimming pool pumps, spa, and hot tub pumps.

Features: 50°C ambient, 60 Hertz, aluminum endplates, automatic thermal overloads, ball bearings, capacitor start, high service factors, ground screw and shaft slinger. Two-compartment design for easier maintenance. Termination panel with quick connection for easier installation. Class B insulation.

If you are looking for Baldor Light Industrial/Commercial AC Motors, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Baldor NEMA Frame 56C AC motor that you are looking for at the most competitive prices possible. If you are searching for Baldor NEMA Frame 48 and 56 AC motor technical information (data-sheets) please use the datasheets or product selection guide page links.

General Purpose

Applications: Ventilators, summer cooling fans, band saws, drill presses, farm equipment, etc.

Features: 40°C ambient, 60 Hertz, aluminum endplates, automatic thermal overloads, ball bearings, and capacitor start. Termination panel with quick connection for easier installation. Resilient cushion rings on a rugged steel base. Reversible rotation. Class B insulation.

HVAC Blower

Applications: Heating, ventilation, and air conditioning blowers. Designed for continuous air-over applications with moderate starting loads.

Features: 40°C ambient, 60 Hertz, aluminum endplates, automatic thermal overloads, ball bearings. Termination panel with quick connection for easier installation. Resilient cushion rings on a rugged steel base. Reversible rotation. Class B insulation.

Direct Drive Fan

Applications: Air-handling fans, confinement houses, exhaust fans, unit heaters. Designed for continuous air-over applications with moderate starting loads.

Features: 40°C ambient, 60 Hertz, aluminum endplates, automatic thermal overloads, ball bearings, and capacitor start (single phase). Termination panel with quick connection for easier installation. Resilient cushion rings on a rugged steel base. Reversible rotation. Class B insulation.

Fan & Blower

Applications: Air conditioning equipment, blowers, and fans. Designed for applications with moderate starting loads.

Features: 40°C ambient, 60 Hertz, aluminum endplates, automatic thermal overloads, and ball bearings. 1.25 service factor. Termination panel with quick connection for easier installation. Resilient cushion rings on a rugged steel base. Reversible rotation. Mounting base is notched with mounting holes for NEMA 48 and 56. Class B insulation.

Incubator/Hatchery Vent Fan

Applications: Direct drive hatchery and incubator fans.

Features: 40°C ambient, 60 Hertz, aluminum endplates, automatic thermal overloads, and ball bearings. 1.0 service factor. Extended through bolts. Pilot circuit. Class B insulation.

Condenser Fan

Applications: Condenser fans, refrigeration fans and heat pumps. Designed for continuous air-over applications with moderate starting loads.

Features: 6" long by 1/2" diameter shaft with two flats 90° apart, 30" leads. 60 Hertz, aluminum endplates, automatic thermal overloads, and ball bearings. Class B insulation. Reversible rotation. 1.0 service factor. 370-volt capacitor not included. 60°C ambient.

Direct Drive, Indoor Blower

Applications: Air handlers, evaporators and furnace blowers. Designed for continuous air-over applications with moderate starting loads.

Features: 6" long by 1/2" diameter shaft with two flats 90° apart, 30" leads. 60 Hertz, aluminum endplates, automatic thermal overloads, and ball bearings. 370-volt capacitor not included. Extended through bolts. Reversible rotation. 1.0 service factor. Class B insulation. 40°C ambient.

Yoke/Pedestal Fan

Applications: Air circulation fans. Designed for continuous air-over applications with moderate starting loads.

Features: 40°C ambient, 60 Hertz, aluminum endplates, automatic thermal overloads, and ball bearings. 1.0 service factor. Extended through bolts on 5.13" bolt circle for mounting fan shroud. Heavy gage steel yoke with 180° slot for wide angle rotation. Pull chain switch (2sp only) for high and low speeds. Reversible rotation. Termination panel with quick connection for easier installation.

Whether we have NEMA Frame 48 and 56H motors in stock in Boise Idaho or need to ship direct from ABB Baldor to any USA cities; CTi Automation can get 1-phase motor to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some 3-phase motors enabling us to further assist you in finding the correct NEMA Frame 48 and 56 motor in the USA, Canada, or Mexico. It will be very helpful if you have the NEMA Frame 48Z, 56 thru 56Z motors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for NEMA Frame 48Z motor that you are looking for in seconds. If you do not have the part numbers for NEMA frame 48YZ motors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.