|
SNB Series NEMA Sheet Metal Boxes
- Designed to meet NEMA 1, 2, 4, 4X, 12, 13 and IP65 ratings
- UL listed and tested to UL508-4X requirements (UL listing pending on New Sizes)
- Continuous seam welded 16 ga. steel construction
- Cover closes securely with unique key provided
- Includes stainless steel wall mounting bracket kit
- Bonding studs for grounding are provided on base and door
- Finish: Smooth gray powder coat
- Easily machined and modified to your particular requirements
- Includes 14 ga. steel, zinc plated removable inner panel
|
SNB Series |
|
If you are looking for BUD NEMA Enclosures, please call us at (800) 894-0412 or email us at
info@ctiautomation.net we will do our best to help
you find the BUD Watertight Sheet Metal Boxes that you are looking for at the most competitive prices possible. If you are
searching for BUD NEMA 12, 13 Pushbutton Enclosure technical information (data-sheets) please use the datasheets or product
selection guide page links.
|
|
SNB Series Stainless Steel Boxes
- Continuous seam welded 304 stainless steel construction
- Hinged cover clamps to the base with keyed quarter turn latch for a watertight seal
- External mounting brackets allow box to be mounted on a wall or panel without having to remove the cover and exposing
internal components to the environment
- Bonding studs for grounding are provided on base and door
- Internal panel and hardware included
- Designed to meet NEMA type 1, 2, 4, 4X and IP65 ratings
- Easily machined and modified to your particular requirements
- Finish: Natural, exterior polished, Internal Panel - Clear Zinc plate
- Note: UL listing is pending
|
SNB Series Stainless Steel |
|
NEMA Sheet Metal Box with Lift-off Screw Cover
- Designed to meet NEMA 1, 2, 4, 4X, 12, 13 and IP65 ratings.
- UL listed to UL508-4X requirements (pending).
- Continuous seam welded 16 ga. steel construction.
- Screw mounted lift-off cover facilitates machining and assembly of components.
- Bonding studs for grounding are provided on base and door.
- Easily machined and modified to your particular requirements.
- Includes stainless steel wall mounting bracket kit.
- Includes 14 ga. steel, zinc plated removable internal panel.
- Finish: smooth gray powder coat.
|
SNC Series |
|
SN-Series NEMA Sheet Metal Boxes
- Made from durable 14 ga. steel (0.078" thick).
- Smooth continuous welded seams.
- External mounting brackets allow the box to be mounted on a wall or panel without having to remove the cover and
exposing internal components to the environment.
- Hinged cover clamps to the base with stainless steel brackets and steel screws for a watertight seal.
- Weld nuts for inner panel mounting.
- Bonding studs for grounding are provided on base and door.
- Easily machined and modified to your particular requirements.
- Internal panel and hardware included.
- Tested and listed to UL-508 Type 4x requirements (UL File #E194432)
- Finish: Smooth gray powder coat
|
SN Series |
|
NEMA 12, 13 Pushbutton Boxes (Water-Tight & Oil Resistant)
- Heavy duty 14 GA steel seam welded construction
- Cover with captive screws and sealing washer
- Cover screws thread into sealed nuts for additional sealing protection
- Cover has oil resistant die-cut gasket for reliable and lasting protection against dust, water and oil
- Cover supplied with 22.5-mm or 30.5-mm four-way pushbutton holes
- Welded ground nut inside body
- External flanges with holes for wall mounting
- Durable ANSI 61 Grey Powder coating
- Designed to complies with NEMA and UL-508A Type 12 and 13 rating
- UL listing pending
|
Push Button |
|
NEMA 1 Sheet Metal Junction Box with Lift-off Screw Cover
- Heavy duty 16 GA welded steel construction
- Screwed on flat cover with key holes for easy assembly
- Boxes with knockouts have easily removable concentric knockouts on all four sides for industry standard conduit
sizes
- Four wall mounting holes in back
- Embossed grounding hole in bottom allows easy access and flush wall mounting.
- Durable ANSI 65 Grey Powder coating
- Complies with NEMA and UL Type 1 rating
- UL listing pending
|
Screw Cover Junctions |
|
NEMA 1 Sheet Metal Junction Box with Hinged Cover
- Heavy duty 16 GA welded steel construction
- Hinged cover with slotted-head quarter-turn cam lock
- Easily removable concentric knockouts on all four sides for industry standard conduit sizes. 3" depth box do not have
knockouts on hinge side.
- Four wall mounting holes in back
- Embossed grounding hole in bottom allows easy access and flush wall mounting.
- Durable ANSI 65 Grey Powder coating
- Complies with NEMA and UL Type 1 rating
- UL listing pending
|
Hinged Cover Junctions |
|
Whether we have BUD NEMA 4 SNB series sheet metal enclosures in stock or need to ship direct from BUD
Industries to any USA cities; CTi Automation can get SNB series NEMA 4 stainless steel enclosure to you fast and save you some
money! Our industrial factory automation supplies distributors warehouse stocks some BUD Industries products enabling us to
further assist you in finding the correct BUD NEMA 1 sheet metal junction box with lift-off screw cover in the USA, Canada, or
Mexico. It will be very helpful if you have the BUD SNC series NEMA 4 sheet metal box with lift-off screw cover part numbers
ready, then our sales representatives can provide you with a pricing and availability quote for SN series NEMA 4 sheet metal
boxes that you are looking for in seconds. If you do not have the part numbers for BUD steel NEMA 1 rated junction boxes with
hinged cover, our application engineers will be able to help you figure out the part numbers and get the price quote to you as
soon as possible.
|
