(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

The design of this Bud unit makes it perfect for your portable instrumentation, yet the versatile, lightweight Showcase will do an effective job as a desktop instrument case, in systems or racks. Compounding its versatility is the fact that the Showcase comes in 9 sizes.

Features:

• Comes with front and rear panels and bail
• Two color combination: Black Texture (BT) body with White frame; Royal Blue Texture (RB) with White frame.
• Top, sides and bottom, .05" aluminum; front panel, .09"; rear panel, .05." Extruded aluminum frame. Side gussets provide added strength. Strong, flexible handle is recessed and secured firmly into top for safe handling. Carrying handles limited to 25# load capacity. Ventilation slots under handle.

If you are looking for BUD Small Metal Enclosures, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Metal Cabinets that you are looking for at the lowest prices possible. If you are searching for Small Boxes technical information (data-sheets) please use the BUD Metal Enclosure Datasheets OR Product Selection Guide page links.

Aluminum Instrument Case

• Strong and stylish extruded aluminum body with plastic front and rear bezels
• Removable front and rear panels with protective plastic film allow for easy machining with protection from scratches
• Adjustable locking aluminum/plastic handle allows for multi-positional carrying and benchtop use
• Extruded internal grooves for horizontal mounting of circuit board, chassis, or panel
• Four scuff-resistant antiskid feet; front feet feature foldable bails
• Finish:
  • Body: Fine textured earthtone powder coating
  • Bezel: Light brown plastic
  • Panels: Natural aluminum
  • Handle: Light gray plastic/anodized aluminum finish
• Custom modifications available on request

With the TR, you'll give your instrumentation a look that sets it far apart from the conventional. Its styling and versatility makes the TR ideal for your application whether it be a portable enclosure, a desktop instrument case, or in systems.

Features:

• Top and bottom, .05" aluminum; front panel, .09" aluminum. Extruded aluminum frame. Corner gussets for added support. Carrying handle may be used as tilting bail. Front panel, selfadhesive rubber feet and handle/bail included.
• Since chassis is reversible, two configurations are possible with one unit. Top and bottom easily removed for access to dust-free interior. Will accommodate an accessory chassis or .06" thick P.C. boards.

Contour Utility

• 20 gauge steel. Louvered rear panel. Rubber feet furnished.
• Removable flanged panels have rounded corners and edges to preserve the contoured styling of the highly versatile cabinet.
• Gray Texture body (GT) with White Texture (WH) panels.

Converta Box

• .05 aluminum. Welded base and two-sided cover attached with self-tapping screws.
• Components or controls can be mounted to any surface.
• Natural finish.

Utility Cabinets

• Available in 20 gauge steel or .04" aluminum. Sturdy, all-welded body.
• Economical cabinets have removable front and back panels.
• "CU" prefix: Steel with Metallic Gray (MG), "AU" prefix: Aluminum alloy in natural or Metallic Gray (MG). If no suffix is specified, natural finish will be supplied in utility cabinets.

Champion Series

• Top, bottom, front and rear panels, .05" aluminum
• Ventilation slots in bottom and rear panel
• Easily assembled with eight self-threading screws
• No screws on front or rear panels
• Designed to allow for maximum interior space
• Removable top and bottom provide easy access to components
• Four self-adhesive rubber feet provided

Transi Cases

• .04" aluminum body. Portable. Flush fitting .05" aluminum panel. Bright nickel-plated hardware. Black plastic handle. lastic feet on base and back.
• Knobs, dials, switches, etc. protected by slide-off lid; 1.50" clearance above panel.
• Royal Blue Texture (RB) and Gray Texture (GT).

Shadow Cabinets

• Tops, sides and bottom, 18 gauge steel. Panels, 16 gauge steel. Front, rear panels and bottom removable. Rubber feet furnished.
• Recessed front panel and beveled edges of body provide handsome styling, and prevent accidental movement of controls, knobs, switches, etc.
• Metallic Gray (MG) finish.

Portacabs

• .05" aluminum. Front panel recessed .50" and fits contour of cabinet. Louvered sides. Welded back has opening. Four plastic feet furnished.
• Designed for bench or portable use. Lightweight yet strong. Reinforced flexible handle recessed to permit stacking. Carry handle limited to 25 Lb. load capacity.
• Metallic Gray (MG) finish.

Sloping Panel Prestige Cabinets

• 16 gauge steel. Snap-in handles.
• Solid steel hinged top, with rear ventilation slots, opens completely. Remove 19" panels by simply removing panel trim bar.
• Metallic Gray (MG) finish.

Sloping Panel Cabinets

• Nine sizes, each with removable front panel.
• Hinged top opens completely for access to components mounted on chassis.
• Metallic Gray (MG) finish.

Small Wall Mount Box

• All steel construction with hinged front door. Slots on rear surface allow boxes to be easily mounted to a wall, panel, or post.
• White Texture (WH) finish.

Futura Boxes

• Straight, 18 gauge steel front vertical panel. One-piece side and top. 20 gauge steel sides, top, base and rear panel. Sides fit into flanges on base.
• Chassis may be attached to base, front, or rear panels. Sides and top can be removed from base for easy access to interiors. Rubber feet furnished.
• Royal Blue Texture (RB) body and rear panel, White Texture (WH) front panel.

These low-cost extruded aluminum enclosures offer an alternative to the standard die-cast or fabricated aluminum box. The silver colored finish is offset by the black plastic bezels producing a classic, yet futuristic, appearance to your product. Removable end panels allow for easy and low-cost modifications.

• One piece extruded aluminum housing
• Individual aluminum end panels
• ABS plastic panel bezels
• Internal PCB card guides
• Silver housing finish with black plastic bezels

Slope Enclosures

• The clean, contemporary design of both units gives you excellent visibility of panel mounted components.
• Base, .09" aluminum; cover, .05" aluminum. Rubber feet furnished.
• Base, Black Texture (BT). Cover, Smooth White.

Miniboxes

• .04" aluminum alloy. Two sections slip together and may be joined by either built-in snap lock or sheet metal screws (included).
• Flanged sections assure proper shielding. Units can be used as separate housings or as part of larger assemblies.
• Natural (A) or Smooth Gray (B) finish.

Another best-seller from Bud for good reason: These standard dual-slope enclosures have that custom-designed keyboard styling and, equally important, they can be used for a variety of instruments.

• Base and side, .09" aluminum; back panel and cover, .05" aluminum. Rubber feet furnished. Two configurations.
• Maximum visibility, no exposed screws on front panel area. Knockouts in louvered rear panel.
• Base, Black Texture (BT). Cover, Smooth White.

Keyboard Enclosures

• General Features: Finish: Base: Gray Texture (GT). Cover: Prepainted smooth white. Self-adhesive black rubber feet. Keyboards are shipped completely assembled.
• KB-13200 Base: .09", cover .05" aluminum, Two .50" knockouts in rear, 7° 46' angle top. Weight 1 lb. 3 oz.
• KB-13201 Base: .09", cover .05" aluminum, Two .87" knockouts in rear, 7° 40' angle top. Weight 2 lbs. 9 oz.
• KB-13202 Base: .09", cover .05" aluminum, Two .87" knockouts in rear, 7° 32' angle top. Weight 4 lbs. 2 oz.
• We can punch these enclosures to conform with your keyboard arrangements prior to forming. Prints available for your layouts.

Slimcab Desktop Cabinets

• Design Features: Cover .05" aluminum, panels .12" "Surface Shield" Aluminum. Sides vented for cooling. Three sizes available, all 1-U (1.75") High. Bonus Features: Suitable for desktop or 19" rack mount use with optional brackets. Finishes: Available in Sand Texture or Smooth Black (EBL).

Whether we have Small Metal Enclosures in stock in or need to ship direct from BUD Industries to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); CTi Automation can get Small Cabinets to you fast and save you some money!

Our BUD Industries distributors warehouse stocks some Small Metal Enclosure products enabling us to further assist you in finding the correct Small Metal Boxes in the USA, Canada, or Mexico. It will be very helpful if you have the BUD Small Metal Enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for BUD Compucab Series Enclosures that you are looking for in seconds. If you do not have the part numbers for BUD Small Metal Boxes, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us!