(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Most of these gasketed enclosures have been tested and approved to UL508-4X specifications, with a few being approved to UL50-4X. All enclosures meet NEMA 1, 2, 4, 4X, 12, and 13 and IEC529-IP65 requirements. (NBA is not NEMA 12.)

• ABS plastic enclosures are molded out of light gray material with a UL94-HB flammability rating
• UL508-4X enclosures are molded out of light gray ABS/PC blended plastic with a UL94-5VB flammability rating
• Clear doors for all models are Polycarbonate plastic with a UL94V-0 flammability rating
• UL508-4X enclosures are molded out of light gray PC/PBT blended plastic with a UL94-5VA flammability rating

If you are looking for BUD Plastic Enclosures, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the NEMA Heavy-Duty Box that you are looking for at the lowest prices possible. If you are searching for BUD DIN Rail Enclosure technical information (data-sheets) please use the BUD Plastic Box Datasheets OR Product Selection Guide page links.

These polycarbonate & high-impact ABS molded enclosures meet NEMA 1, 2, 4, 4X, 12, and 13, IEC52/IP65, and UL508-4X specifications. They are ideal for PCB enclosures, junction boxes, and other applications in the electrical and electronic industries which are used in wet, dirty and/or corrosive environments. Available in a variety of sizes, these molded enclosures are offered in three different styles:

• Light gray polycarbonate body and cover. Body/Cover - UV stabilized, UL94-HB indoor/outdoor flammability rating.
• Light gray polycarbonate body and clear polycarbonate cover. Body/Cover - UV stabilized, UL94-HB indoor/outdoor flammabilityrating.
• Dark gray ABS body and cover. Body/Cover - UL94-HB flammability rating (indoor only).

These transparent polycarbonate molded enclosures meet NEMA 1, 2, 4, 4X, 12, and 13 specifications and are ideal for PCB enclosures, test equipment and other applications in the electrical and electronic industries. Available in a variety of sizes, these molded enclosures allow easy monitoring of displays, readouts and other devices.

• Transparent blue polycarbonate design reduces the need to remove cover to verify NEMA protection
• Near complete transparency to blue, white, and near white displays
• Designed to IEC52/IP65 and NEMA 1, 2, 4, 4X, 12, and 13 specifications
• Lap joint design combined with silicone gasket ensures protection against ingress of dust and splashing water
• Internal guide slots for mounting PCB assemblies vertically on some models
• Internal bosses allow mounting of PCBs horizontally or for connection of terminals etc, into threaded brass inserts
• Cover screws are M-4 stainless steel, non-magnetic and fasten into threaded brass inserts
• UV stabilized polycarbonate with UL94-HB flammability rating

Fiberglass NEMA Box

• Durable and easy to machine Fiberglass Reinforced Plastic
• NF version features stainless steel screw type lid closure
• NFL version features stainless steel latch type lid closure
• Provides outstanding protection against corrosion
• Chemical resistant and impervious to dents
• Designed to meet NEMA 1, 2, 4, 4X, 12, 13, and IP65 specifications
• Stainless steel hinge, screws, and wall mounting brackets
• Includes powder coated 14 ga. steel removable inner panel
• UL listed and tested to UL508-4X requirements (NFL latch closure version pending)
• Finish: Light Gray

NEMA Heavy Duty

• Designed to IP 66 of IEC 529 and NEMA 4, 4X, 12, 13
• Cover attaching screws are outside the sealing area, thus preventing ingress of moisture and dust
• Mounting flanges for easy wall installation
• Internal bosses allow mounting of PCBs horizontally or for connection of terminals
• Cover screws are M4 stainless steel, non-magnetic and fasten into threaded brass inserts
• UL 94V-0 flame rating
• Polycarbonate material has an operating temperature of -40°C to +120°C and is UV stabilized
• Textured/ recessed surface area suitable for printed graphics, labels, membrane keypads.

These useful enclosures are ideal for portable hand held equipment. Made out of durable ABS material, they are offered in six styles.

• Style B is a T-shaped enclosure that is available with/without 4.00" × 1.75" LCD cutout in the display area, and with/without a 9-volt/AA battery compartment. It is made out of ABS plastic in a gray finish, with UL94V-0 flammability rating.
• Accessories: HH-3440-TS - Tilt Stand, HH-3441-G - Gasket, HH-3442-C-AA Battery Contact Kit, HH-3595-BCB (Black Belt Clip), HH-3595-BCG (Gray Belt Clip)

Plastic boxes with DIN rail mounting and double-tiered contacts.

• Durable UL94V-0 rated ABS plastic housing
• External clamp type contacts with M2.5 screws and lock washers
• Internal solder tab contacts
• All contacts are tin plated brass and have 10amp rating
• Internal vertical PCB card guides
• Snap-fit covers
• Fits standard DIN rails
• Light gray finish

These sturdy enclosures come in a variety of styles and sizes and are constructed of high quality plastic materials. Housing designs allow complete accessibility to internal components. Contact Bud factory for optional colors, materials, EMI/RFI shielding, and custom modifications.

• Impact resistant polystyrene
• UL94-HB flammability rating
• Molded-in card guides and mounting bosses
• Comes complete with plated steel screws & rubber feet
• Finish - Double-Textured PC Bone Gray
• Shipped assembled

The line of molded enclosures is ideally suited for instrumentation and telecommunications equipment from hand-held to desktop sizes. Available is twelve sizes and two versions.

• Dark gray ABS covers with light gray ABS end panels. UL94V-0 flammability rating.
• Light gray ABS covers with dark gray ABS end panels. UL94-HB flammability rating.
• Designed to IP 54 of IEC 529
• Two part design with tongue and groove joint between top and bottom covers and specially designed end panels
• Internal guide slots provided for vertical mounting of PCBs
• Internal bosses provided for horizontal mounting of PCBs
• Top and bottom covers are lightly textured providing a scratch-resistant, high quality finish
• Four screws are countersunk in the bottom cover and thread into internal bosses which secure the top cover and end panels

Available in a variety of styles and sizes, these functional utility enclosures are made from UL-rated, high impact plastics, with a scratch resistant finish. Available in two types of finishes with or without battery compartments. Refer to the following prefix description to ensure proper ordering:

• PS - Textured body with smooth top insert.
• PT - Textured body with textured top.
• PBS - Textured body with smooth top insert and 9-volt battery compartment.
• PSS - Textured body with smooth top and end panels.
• PSP - Textured body with smooth top and sloped panels.

Compact, ergonomic design features removable panels for each end that allows for easy modification. Its recessed top is suitable for label or keypad, and it has convenient internal PCB mounting bosses. Made from durable, black ABS plastic with UL94-HB flammability rating. Comes complete with top cover, bottom cover, end panels, and assembly hardware. Molded-in holes accept optional belt clip.

• HP-3645 Transparent red lens
• HP-3647 Transparent red lens
• HP-3648 Transparent red lens
• HH-3595-BCB (Black Belt Clip)

Bud's Utilibox is the ultimate value in plastic utility boxes. Now available in a variety of styles and sizes. Contact Bud factory for optional colors, material, EMI/RFI shielding, and custom modification.

• Polystyrene plastic, UL94-HB flammability rating
• Comes with close-fitting interlocking lid and assembly hardware
• Provisions for mounting horizontal PCB
• Finish: Black

Available in 3 styles and a variety of sizes, these low-cost enclosures are made of tough, lightweight ABS thermoplastic. Flammability rating: UL94V-0 (UL94-HB new sizes only). Optional close-fitting covers are available in all sizes.

• Style A
• Style B
• Style C
• Black finish

These handsome instrumentation enclosures are not only lightweight and portable, but are also made out of economical ABS plastic. The adjustable handle allows for easy carrying and doubles as a tilt stand when used in a desktop configuration.

• ABS plastic, UL94-HB flammability rating
• Adjustable plastic and aluminum handle
• Front and rear panels allow for easy modification
• Internal printed circuit board horizontal mounting bosses and vertical card guides
• Light gray top and bottom covers
• Black front and rear end panels

Pocket-size enclosure is designed specifically for USB applications. It features a time-saving, snap-together three-piece design, and smooth surfaces with recesses in both halves.

• Gray Color: Durable self-extinguishing ABS plastic material with UL94-HB flammability rating.
• Clear Color: Durable self-extinguishing Polycarbonate plastic material with UL94V-0 flammability rating.

Enclosure for devices mounted in a standard 125VAC power plug. Includes integral 125 VAC plug with through-hole solder terminals inside and external mounting flange in base. Durable ABS plastic has UL94V-0 flammability rating. Internal PCB mounting bosses in base. Cover is securely attached to the base with four matched screws.

Whether we have BUD Boxes in stock in or need to ship direct from BUD Industries to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); CTi Automation can get Plastic Enclosure to you fast and save you some money!

Our BUD Industries distributors warehouse stocks some BUD products enabling us to further assist you in finding the correct BUD NEMA Boxes in the USA, Canada, or Mexico. It will be very helpful if you have the BUD Plastic Box part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Hand Held Enclosure that you are looking for in seconds. If you do not have the part numbers for BUD DIN Rail Box, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us!