(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

Ideal for installation where easy access to components is a top priority. Each built for years of solid, trouble-free service, as well as obvious ease of service where frequent attention is desired (i.e. telephone switching systems, etc.).

• These aluminum racks are available in two heights with 19" and 23" wide panel spaces. Panel mounting holes are #12-24 tapped on E.I.A. universal spacing on both the front and rear flanges. (Use #9260 screws - order separately)
• Base Angles: .25" × 3.50" × 6.00"
• Top Angles: .18" × 1.50" × 1.50"
• Uprights: .15" × 3.00" web with two .18" × 1.26" flanges
• Overall Width: 20.25" for 19" rack; 24.25" for 23" rack
• Overall Depth: 15.00" base, 3.00" upright, 6.00" top
• Racks have been tested to 1000# equipment load capacity

If you are looking for BUD Open Racks, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the Server Rack Assemblies that you are looking for at the lowest prices possible. If you are searching for Aluminum Racks technical information (data-sheets) please use the BUD Open Rack Datasheets OR Product Selection Guide page links.

BUD Industries Wall Mount Open Racks

• These racks provide open rack provisions when floor mounting space is not available. They feature 19" wide panel space, with mounting holes tapped with #12-24 thread on E.I.A. universal spacing on both front and rear flanges (use #9260 screws - order separately) and are constructed of standard natural finish aluminum with metallic gray finished heavy gauge steel wall mounting brackets. Racks have been tested to 400# equipment load capacity.

These swingframe racks offer all the conveniences of a wall mounted rack, plus the added advantage of a swing out frame for easy access to the rear of your equipment.

• Left or right hand hinge
• #12-24 panel mounting hardware (Use #9260 screws - order separately)
• Velcro cable straps included
• 16" on center wall mounting (wall mounting hardware not included)
• 75# equipment load capacity
• Two Styles: Style A-Knockdown Assembly & Style B-Welded Assembly
• Finish: Black Texture (BT)

These heavy duty racks are available in 6' and 7' heights and 19" wide panel space. Panel mounting holes are #12-24 tapped on E.I.A. universal spacing. (Use #9260 screws - order separately.) Panel mounting holes are located on front flanges only.

• Base Angles: .25" × 3.50" × 4.87"
• Top Angles: .12" × 2.09" × 1.56"
• Uprights: .18" × 3.00" × 1.28"
• Overall Width: 20.37"
• Overall Depth: 12.75" base, 3.00"
• upright, 6.12 top
• Finish: Black Texture (BT)
• Racks are shipped knocked down in two (2) cartons, with all necessary assembly hardware included.

Exceptionally strong structure made up of chassis-type base and supporting angles.

• Uprights, .11" steel channels, 3.00" deep; top plate, 1.12" × 3.12".
• Rails tapped #10-32 on E.I.A. universal spacing. (Use #7346 screws - order separately)
• Base is 19.96" × 22.00" and drilled for RC-7758 casters. Racks have been tested to 650# equipment load capacity.
• Finish: Metallic Gray (MG) and Black Texture (BT).
• Racks are shipped knocked down in two (2) cartons, with all necessary assembly hardware included.

Extra-sturdy racks made of 14 & 12 gauge steel. Eight-inch deep welded "U" member and triangular bracket hold uprights to base(12GA.).

• Panel mounting rails tapped #10-32 on E.I.A. universal spacing. (Use #7346 screws - order separately.)
• Chassis type base, 20.87" × 26.00", drilled for RC-7758 casters. Racks may be bolted together in Add-A-Rack fashion.
• Finish: Metallic Gray (MG) and Black Texture (BT).
• Racks are shipped knocked down in two (2) cartons, with all necessary assembly hardware included.

Chassis-type base holds heavy components for table mounting applications. Supporting angles provide strength and rigidity

• Panel mounting rails tapped #10-32 on E.I.A. universal spacing. (Use #7346 screws - order separately.)
• Standard 19" panel fits flush with front.
• Base, 20.37" × 12.00".
• Shipped knocked down.
• Finish: Metallic Gray (MG) and Black Texture (BT).

Bud's Double Racks offer the ideal solution when full, natural ventilation and a strong four-point mounting system is required, but without the need for the security offered by a Full Cabinet Rack. Offered in the standard 84" height and in three commonly used depths.

• Lightweight but sturdy, aluminum and steel construction
• Standard 19" × 77" (44-U) panel space with #12-24 tapped mounting holes
• Standard 84" overall height and 20.25" overall width
• Choice of three depths of 24", 30", or 36
• Shipped knocked down in one carton; easily assembled with one 5/8" wrench
• Sturdy, solid four-point mounting for heavy networking equipment
• Dual mounting surfaces and choices in depth provide numerous mounting possibilities
• Unique depth extenders provide for wiring ladder and/or cableway mounting
• Can be mounted to the floor for additional sturdiness and security
• Meets EIA-310 standards
• 1100# equipment load capacity

Bud's cable management rack offers all the advantages of a standard open rack plus the additional advantages of built in vertical cable management, horizontal cable trough at top of rack, and your choice of either 19" or 23" panel space width.

• Extra deep 3.00" × 6.50" upright rails
• 77.00" of usable panel space height
• 19.00" or 23.00" panel width
• All aluminum, bolt together, construction
• Integral vertical and horizontal cable management
• Complete with cable management clips and straps, and all necessary hardware, in one convenient carton

Bud's open rack assembly allows you to order the popular ARR-1272-BT aluminum open rack, together with Bud's efficient cable management system, all under one easy part number.

• ARR-1272-BT Black finished aluminum rack with 19.00" × 77.00" usable panel space
• Twelve CM-1196 Cableway Rings
• One pair CM-1197 Cableway Covers
• Six CM-1220 Cable rings
• All necessary assembly hardware
• Accepts all Bud open rack accessories
• Shipped knocked down in one carton

Bud's server rack assembly is the ideal framework for organizing your networking components. Comes complete with 23" panel width network frame, monitor shelf with switchbox compartment, power outlet strip, sliding keyboard shelf with mouse pad, and two heavy duty equipment shelves. All components are fully adjustable to your particular requirements.

• Shipped knocked down in one carton
• Black Texture (BT)

Whether we have BUD Open Racks in stock in or need to ship direct from BUD Industries to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); CTi Automation can get Open Rack Assembly to you fast and save you some money!

Our BUD Industries distributors warehouse stocks some Cable Management Rack products enabling us to further assist you in finding the correct Double Racks in the USA, Canada, or Mexico. It will be very helpful if you have the BUD Open Rack part numbers ready, then our sales representatives can provide you with a pricing and availability quote for BUD Heavy Duty Steel Racks that you are looking for in seconds. If you do not have the part numbers for BUD Series RR-1263, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us!