(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

FP0R Series

• User's Guide

Ultra-high speed scanning by FP0R:

• 100 program steps: 0.2 msec or less
• Even 1000 program steps: 0.5 msec or less
• FP0R can serve well as a high performance sensor controller in combination with a Panasonic Fiber Sensor

Functionality enhancements of systems (analog control, positioning, communications, and touch panels) inevitably accompany an increase in the number and complexity of programs. FP0R accommodates the increase with its large program memory capacity of 32 k steps as well as a data register of 32 k words, and facilitates record management and data setting for a variety of product types. The F type (FP0R-F32) has a built-in FRAM, which is a cutting-edge device that allows the automatic real-time saving of all data without a backup battery.

If you are looking for Aromat NAiS PLCs, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the NAiS FP0 Programmable Logic Controllers that you are looking for at the most competitive prices possible. If you are searching for Aromat PLC FP Sigma technical information (data-sheets) please use the datasheets or product selection guide page links.

FP Impulse Controller

Panasonic Electric Works Corporation once again expands its line of PLCs with the introduction of the first contact Impulse Heat Controller PLC. The Impulse Heat Controller is ideal for small machines where space is a premium, yet, it is required to perform difficult tasks. The controller performs the task of precisely controlling the heating and cooling process to ensure a perfect seal. This compact controller has programming memory of 2.7K steps. Its temperature input range is between 22 and 1076 degree F with a 0.1 degree F resolution. The response of this controller is 18ms temperature update time.

The controller has an outstanding PID algorithm for tight, accurate and repeatable seal quality compared to other controllers. This controller has a built-in Auto-Tune feature for quicker set up time. It features total machine control with built-in 8 digital inputs, 5 NPN transistor outputs, 1 relay output, and 2 Com ports for additional communication with other devices, such as barode readers, PC, HMI, etc. Programming can be done in plain Ladder Logic or using IEC 61131 software.

FP-X Series

• User's Guide

The FP-X PLC comes with a wide range of features suitable for most applications and is designed to save development cost. Ultra high processing speed of 0.32 µsec per instruction (executes a 5 Kstep program in 1.9 msec). Large program capacity of 16, or 32 Kstep exceeds the capacity of most compact PLCs. Expandable up to 382 I/O points, low cost coordinated motion, analog, and communication cassette options are also available.

Excellent for communication applications with the ability to network 16 FP-X (master to master network), or 99 FP-X (master to slave network). Modbus RTU master and slave supported (will support up to 63 slave per master). Built-in 8 channels of high speed counters with speeds up to 10 KHz per channel (optional high speed counters also available with speeds up to 80 KHz). USB connection, built-in power supply, removable screw terminals are only a few of the well thought out features of the FP-X PLC.

FP-e Series

• User's Guide

From the makers of the first SLIM FP0 PLC, Aromat NAiS is proud to introduce the industry's first panel mount PLC, the FP-e. This small (DIN 1/16 case) PLC has a built-in bright 3 color LED panel capable of displaying up to 5 digits along with predefined units.

The function keys on the front panel can be used for setting Timers, Digital & Analog Counters, Temperature Set Points, internal bits, regular data points, and can also be used as 16 additional input switches. Up to 6 screens can be programmed, and with our new wizard feature added to our FPWINGR programming software, this is even easier.

FP2/FP2SH Series

The FP2SH is not only one of the smallest rack systems in the market, but one of the most powerful. The FP2SH can essentially be a motion controller. It can control up to 64 axes and output up to a 1MHz pulse train or 256 network servo axes. With a response time of less than 0.1 ms and a scan time of 1ms for a 20K step program, the total overhead delay for A 32 Axis A Series Servo System is only 2.2ms.

The FP2 can currently support four types of networks: Ethernet, Profibus-DP, MEWNET and Remote I/O. It is possible to have up to 8 network units per rack, and all three can be supported at the same time. There are 2 types of Windows based 32 bit programming software available. FPWIN-GR, easy programming with powerful features and FPWIN-PRO, IEC61131 based object oriented programming.

FPΣ Series

• User's Guide

More advanced and complex control is required of PLCs in accordance with equipment functionality enhancements. The FPΣ is compact in size but equipped with a RISC processor that processes basic instruction at speeds of 0.32 usec/ instruction. Some of the features that results are super fast floating point calculation, built-in two axis of motion with linear/circular interpolation (expandable to 10 axes), easy PID instruction that supports up to 24 loops, 4 channels of built-in high speed counters, etc.

The FPΣ can support up to 3 serial ports configurable for Modbus RTU, PLC to PLC networking, Mewtocol, and General Purpose (custom communication protocol). The FPS has a programming capacity of 32 k steps, and supports up to 384 I/O points.

FP0 Series

• User's Guide

Aromat NAiS established a new world standard "SLIM" PLC. Starting from 10 I/O to 32 I/O, the CPU is only 25(w) x 90(h) x 70(d)mm. This is about 1/4 the size of the traditional bulky PLC style called "Brick". The FP0 NAiS PLC saves precious panel space and money. Relay output types have removable screw terminal blocks. The power supply connector is also quick to disconnect. Easy installation especially when duplicating many systems.

Up to 16 loops of PID and auto tuning are built into this "SLIM" PLC. The FP0 uses floating point math for its PID calculation which is more accurate than an integer PID. With the new thermocouple input units, the FP0 can easily and accurately control temperature while controlling I/O. The PID values can be easy calculated with the built-in auto tuning feature. Up to 16 Auto Tuning loops can run simultaneously. The I-PD algorithm is also available to offer smoother control for sensitive applications.

Data Logger Light (DLL) Interfaces

• User's Guide

Panasonic Electric Works is pleased to announce its new Data Logger Light (DLL). This new data logger has features that offer a more complete package with built-in power supply, and numerous communication connections. The data logger stores critical data with a time stamp, which can be utilized in applications that may require trend analysis.

Also, since the logged files are recorded in CSV format, data can be easily imported in various software packages. Whether you need to control power consumption by collecting data from our eco power meters, or improve production yields by analyzing processing trends, the data logger is fully capable of satisfying your application requirements.

FPWIN Pro Basic Version 6.3 (DEMO)

FPWIN Pro is the Panasonic PLC programming software developed according to the international standard IEC 61131-3 (for Windows 2000/XP/Vista). This new version is a result of experience gained over many years. We were one of the first PLC manufacturers to offer an IEC 61131-3 programming software, and we are a leading member of the international organization PLCopen. A flexible choice of editors decreases programming time considerably, allowing you to choose the programming language with which you are most familiar or that best suits your project's structure.

• One software for all Panasonic PLCs
• 5 programming languages
• 6 languages are fully supported
• Remote programming, service, and diagnostics
• Extensive comments and online documentation
• Powerful debugging and monitoring tools

FPWIN-GR Software (DEMO) - Ladder Programming Interface for Panasonic PLCs

• Easy field operations - Not requiring the use of a mouse for data entry, search, writing, monitoring and timer changes, all carried out only from the keyboard.
• Allows standard operations in Windows - Copy & Paste, etc.
• All FP series PLCs are supported - The software is compatible with programs produced in Ver. 4 or Ver. 3 of NPST-GR.
• Easy programming - with wizard functions
• Communication - With OPC Server, CommX, GTWIN, PCWAY simultaneously through the same port.

Whether we have Aromat NAiS PLCs in stock in or need to ship direct from Panasonic Electric Works to any USA cities; CTi Automation can get FPe panel mount PLC to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some FP0R ultra-high speed ultra-compact PLC enabling us to further assist you in finding the correct FP0 ultra-small/ultra-slim PLC in the USA, Canada, or Mexico. It will be very helpful if you have the FP Sigma ultra-slim PLC part numbers ready, then our sales representatives can provide you with a pricing and availability quote for FPX powerful compact PLC that you are looking for in seconds. If you do not have the part numbers for FP2 nano rack PLC, our application engineers will be able to help you figure out the part numbers for FP impulse controller and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.