(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

Our most technically advanced inverter drive continues Lenze - AC Tech's tradition of innovative compact inverter design. The performance and flexibility make the SMVector an attractive solution for a broad range of AC motor applications and with several communications protocols available, networking drives and components into a system solution can be done now or in the future. The SMVector NEMA 1 (IP31) is the most common and cost effective drive enclosure for a wide range of applications including packaging, material handling/conveying, positive displacement pumping, and HVAC systems.

The SMVector NEMA 4X (IP65) is available in two enclosure materials - for indoor only use and for indoor/outdoor use. These rugged enclosure options are ideal for many industries including food/beverage, waste water, chemical metering and processing, and pharmaceuticals. The SMVector with Integral Disconnect is available in a rugged NEMA 4X (IP65) indoor enclosure. The integral disconnect switch offers the ability to isolate the motor for maintenance and servicing. Also - the disconnect switch handle is lockable and is made of red and yellow materials for high visibility.

If you are looking for AC Tech Sub-Micro Drives, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the AC Tech Drives that you are looking for at the most competitive prices possible. If you are searching for AC Tech Sub-Micro Drive technical information (data-sheets) please use the datasheets or product selection guide page links.

The compact packaging and comprehensive functionality make the SCM and SCL an ideal drive solution for use on equipment requiring variable speed, soft starting or reversing operation. The SCM Series can be used with 3-phase AC induction motors rated from 1/3 HP up to 15HP (0.25 - 11 kW) on voltages from 120V single-phase to 480 V three-phase. The SCL is for 240V single-phase inputs up to 3 HP (2.2 kW).

These easy to use drives are configured and ready to use right out of the box for most simple applications. By simple reprogramming, the SCM and SCL will perform many application specific tasks such as multiple preset speeds, electronic braking and motor jogging to name a few. Like all AC Tech sub-micro drives, the SCM and SCL drives use the EPM memory technology for fast and efficient programming. The SCL frequency inverter includes an integral line filter to comply with the relevant European Union standards for EMC and RFI levels. These drives are identical in all other respects.

SMD IP20 V/f Control with Basic & Full I/O

The smd series was designed to address the needs of a simple V/Hz drive that was suited for a global marketplace. The smd drives are consistent with the Lenze 8200 inverter drives in their design and packaging concepts and are manufactured to comply with applicable EU standards for industrial installations of electric motor drives.

The smd with basic I/O is an IP20 enclosed drive available from 0.25 to 4kW for input voltages of 200/230V 1 or 3 phase. 10 I/O terminals provide speed reference plus programmable inputs and relay output. The smd with full I/O is an IP20 enclosed drive available from 0.37 to 22kW for input voltages of 200/230V 1 or 3 phase and 400/480 VAC 3-phase. 15 I/O terminals provide speed reference plus programmable analog and digital inputs and outputs as well as a relay output. RS-485 Modbus RTU / LECOM communications are standard as well. CANopen Variants are also available.

This truly flexible sub-micro drive gives you the compact size you need for your panel layout while delivering on the functions and features your process demands. The SCF Series can be used with 3-phase AC induction motors rated from 1/4 HP up to 30HP (0.18 - 22 kW) on voltages from 120V single-phase to 590 V three-phase.

With 18 isolated terminals (5 logic inputs, 2 logic outputs, 2 analog inputs and 2 analog outputs plus RS485 Modbus Serial Communication), the SCF Series is ideal for motion control applications from the simple to the complex.

Like all AC Tech sub-micro drives, the SCF Series drives employ the EPM memory technology for fast and efficient programming.

The smallest most competitively priced inverter drive with DeviceNet built in!

This truly flexible sub-micro drive gives you the compact size you need for your panel layout while delivering on the functions and features your process demands. The SCD Series can be used with 3-phase AC induction motors rated from 1/4 HP up to 30HP (0.18 - 22 kW) on voltages from 120V single-phase to 590 V three-phase.

The removable DeviceNet terminal block makes it easy to integrate into motion control applications from the simple to the complex.

Like all AC Tech sub-micro drives, the SCD Series drives employ the EPM memory technology for fast and efficient programming.

Delivering torque when you want it, where you want it - the TCF Series from AC Tech will control your motor down to 1Hz at full output torque! When you really need torque, for impact loading or acceleration, the TCF can provide up to 200% motor rated torque.

The TCF is designed for easy integration into your control panel. The compact, contactor style drive conserves panel space and simplifies wiring. Start-up is simplified as well with auto tuning to make sure you get all of the performance you need in either Vector or V/Hz mode.

With 18 isolated terminals (5 logic inputs, 2 logic outputs, 2 analog inputs and 2 analog outputs plus RS485 Modbus Serial Communication), the SCF Series is ideal for motion control applications from the simple to the complex.

Like all AC Tech sub-micro drives, the TCF Series drives employ the EPM memory technology for fast and efficient programming.

AC Tech EPM (Electronic Programming Module) is a standard feature on all SC and TC series drives as described above. This concept of a removable memory structure offers significant benefits for OEM's and users alike. AC Tech EPM and EPM Programmer features include Copy drive settings in 2 seconds, Back-up programs to computer hard-drive or disk, Program without power, Simplify Troubleshooting and more.

Whether we have AC Tech sub-micro drives in stock in Boise Idaho or need to ship direct from AC Tech to any USA cities; CTi Automation can get AC Tech drives to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct AC Tech drives in the USA, Canada, or Mexico. It will be very helpful if you have the AC Tech sub-micro drive part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AC Technology inverters that you are looking for in seconds. If you do not have the part numbers for AC Tech VFD drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.