(800) 894-0412       (208) 368-0415 (Fax)
info@ctiautomation.net

AC Tech MC Series is the intelligent, versatile and cost-effective choice for industrial applications. From harsh environments to high torque loads, the M1000 Series microdrives meet the toughest requirements with outstanding reliability, at a low cost. The easy-to-program AC Tech M1000 offers full features, extensive I/O, and a full array of programmable functions.

The M1000 is available in a power range of 1/4 to 150 HP (0.18 - 110 kW) and voltages ranging from 115 to 575 VAC. With its Enhanced Torque System (ETS), a highly efficient sine coding algorithm and "auto-voltage boost," the M1000 delivers maximum starting and accelerating torque and tight speed regulation, even under fluctuating load conditions. A built-in, UL-approved thermal overload provides full motor protection.

If you are looking for AC Tech Industrial Drives, please call us at (800) 894-0412 or email us at info@ctiautomation.net we will do our best to help you find the AC Tech Drives that you are looking for at the lowest prices possible. If you are searching for AC Tech MC Series Micro Drive technical information (data-sheets) please use the AC Tech Datasheets OR Product Selection Guide page links.

M1000 Drive Features

• Manual boost for high starting torque
• Auto-boost for high torque acceleration at any speed
• Adjustable units display: Hz, RPM, %, /SEC, /MIN, /HR, none
• Slip compensation for tight speed regulation even under fluctuating loads
• Control configuration: local, remote, both, serial communications
• Auxiliary outputs - two open collector outputs and a Form C relay. Functions include: Run, Fault, Inverse Fault, Fault Lockout, At Commanded Speed, Above a Preset Speed, Current Limit, Auto/ Manual Mode Indication
• Modbus Serial Communication Protocol

AC Tech MC3000 series is the choice when your process control demands fast acceleration and response. Designed expressly for use where the motor control is an integral part of a process, the M3000 is rated for constant torque applications but can easily be configured for variable torque applications. Most "process control" drives are designed for variable torque applications where the motor is driving a centrifugal fan or pump. As such, these drives are limited to 110% current for overload situations such as acceleration or responding to a feedback change.

AC Tech MC3000 is a true Constant Torque drive rated for 180% of rated current for 30 seconds and 150% for one minute; this allows faster response to system changes and the ability to apply the MC3000 to non-centrifugal applications such as compressors, conveyors and other "constant torque" loads. The M3000 is available in the same power ranges and voltages as the M1000.

M3000 Drive Features

• Speed synchronized automatic restart after fault
• Loss of follower signal action: fault or go to preset speed
• Control configuration: local, remote, serial communications, keypad, Terminal Strip, PID mode
• Adjustable units display: PSI, CFM, GPM, FPM, IN, FT, Hz, RPM, %, /SEC, /MIN, /HR, none
• Auxiliary outputs - two open collector outputs and a Form C relay: Functions include Loss of Speed Reference Signal, PID High/Low Alarms in addition to those listed for the M1000.
• PID: direct or reverse acting with adjustable Proportional, Integral, and Derivative gains, Signal Calibration, high and low level alarms.
• Sleep mode with adjustable speed threshold and time.
• Metasys Serial Communication Protocol (optional)
• Modbus Serial Communication Protocol (standard)

M1000 and M3000 Industrial Drive Options
Expand the capabilities of your MC drive with the following options. All options can be factory installed or field installed.

• Dynamic Braking: for faster stopping or deceleration
• Additional Form-C relay
• Remote Keypad

Whether we have AC Tech Industrial Drives in stock in or need to ship direct from AC Tech Drives to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.ctiautomation.net can get AC Tech Drives to you fast and save you some money.

Our AC Tech Inverter distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct AC Tech Drives in the USA, Canada, or Mexico. It will be very helpful if you have the AC Tech Enclosed-Micro Drive part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AC Technology Inverters that you are looking for in seconds. If you do not have the part numbers for AC Tech VFD Drives, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Can't find a part number?
E-mail Us.