|
If you are looking for AC Tech EPM Programming Module, please call us at (800) 894-0412 or
email us at info@ctiautomation.net we will do our
best to help you find the AC Tech Drives that you are looking for at the most competitive prices possible. If you are
searching for AC Tech Drive technical information (data-sheets) please use the datasheets or product selection guide page
links.
Easy Archiving to Your PC:
Use the EPM Programmer to save a drives program. This hand-held device holds up to 30 program files, and by using the
Tech-Link Software and a standard RS-232 cable, you can archive the
programs to your PC. The AC Tech EPM Programmer lets you save from and write to EPM's. It also allows you to edit a program using
the 16 character display . Instead of using parameter codes, you see a full description of each parameter and selection.
Job Change-Overs Are a Snap
Some machines and processes are multi-use and require the drive to be reprogrammed for the particular job. If your drive uses the
EPM, instead of reprogramming, all you need to do is simply remove the EPM for the old job and insert an EPM that has been
pre-programmed with the new requirements. No errors, no downtime. Change-over can usually be done by the machine operator using a
pair of common needle nose pliers, rather than requiring a skilled technician or engineer.
OEM Machine Defaults:
The EPM Programmer saves the drives configuration to two memory locations in the EPM, one that is changeable from the front of
the drive and one that serves as the OEM's machine default setting. If the end-user of the machine were to reprogram the drive
causing the machine to malfunction, the drive can easily and quickly be reset back to the OEM's original settings. The default
feature is a significant improvement over traditional technology that requires the drive to be reset back to the drive
manufacturer's defaults, and then calls for a skilled technician or engineer to reconstruct the OEM's programming. This unique
capability of the EPM has saved AC Tech OEM customers immeasurable time in assisting their own customers to get back up and
running in the shortest possible time, often eliminating a service call.
A Troubleshooting Assist
In installations where two or more drives are programmed to perform the same job, and one installation works fine but the other
one is encountering difficulty, the EPM allows the drive programming to be targeted or eliminated as a potential cause of the
problem. Simply by switching EPMs between the working and non-working units, you can determine the cause of the failure. If the
problem moves with the EPM, the root is in the programming. You can utilize this test even if the drives are of two different
ratings. Again, this feature saves the OEM's time and resources in assisting customers, and results in greater customer
satisfaction.
Re-Use The Memory
Yet another great time and money-saving benefit the EPM offers you, if the drive is ever damaged and needs to be replaced, the
EPM is probably still good. Replace the drive, wire it for the job and insert the old EPM. No other programming necessary.
Whether we have AC Tech Drives in stock in Boise Idaho or need to ship direct from AC Tech Drives to any USA cities;
CTi Automation can get AC Tech Drives to you fast and save you some money. Our industrial factory automation supplies
distributors warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct AC Tech
drives in the USA, Canada, or Mexico. It will be very helpful if you have the AC Tech EPM programming module part numbers
ready, then our sales representatives can provide you with a pricing and availability quote for AC Technology inverters that
you are looking for in seconds. If you do not have the part numbers for AC Tech VFD drives, our application engineers will be
able to help you figure out the part numbers and get the price quote to you as soon as possible.
|
