Lenze Group
Home > Products
> AC Tech Drives
|
AC Tech's IP20 submicro drives include the SCF, SCM, SCL, SCD and TCF series drives, a range of drives that
meet your applications requirements from basic to demanding.
- UL Approved thermal O/L
- 8 preset speeds & Forward/Reverse
- 0-10 VDC + 4-20mA speed reference
- DC Braking & Fault history (last 8)
- Relay or transistor output(s) depending on model
- 3 or more programmable inputs
- Isolated Control Terminals
The performance and flexibility make the SMVector an attractive solution for a broad range of AC Motor
applications and with several communications protocols available, networking drives and components into a system solution can be
done now or in the future.
|
 Sub-Micro |
|
If you are looking for AC Tech Drives, please call us at (800) 894-0412 or email us at
info@ctiautomation.net we will do our best to help you
find the AC Tech VFDs that you are looking for at the most competitive prices possible. If you are searching for AC Tech
Inverter technical information (data-sheets) please use the datasheets or product selection guide page links.
|
|
The MC Series drives are built in rugged steel enclosures that hold up to daily life on the factory floor. The
easy to read 16 character LCD display above the drive keypad allows for easy and intuitive set up as well as daily operation.
- 1/4 through 150HP (0.18 - 110kW)
- Input voltages from 120V 1-phase (voltage doubler) to 590VAC
- NEMA Type 1, 12, 4 and 4X Enclosures
This constant horsepower drive can be set up for simple applications requiring ramped start, ramped stop and
speed control to demanding applications that require PID set-point control and many other functions. The MC Series consists of the
MC1000 and MC3000 models; most applications will use the MC1000 with a keypad that includes Start, Stop, up, down, forward/reverse,
Program/Run, Auto/Manual and Enter buttons. For non-reversing applications that require independent switching of start and stop
from local to remote and speed control from auto to manual, the MC3000 series keypad replaces the forward/reverse button with
Local/Remote.
|
 Enclosed-Micro |
|
The MCH Series drives were designed for the HVAC market and the specific requirements of Industrial and Commercial installations. We can provide the drive with standard options such as input disconnect and fusing, line reactor, 3-contactor bypass and more enclosed and mounted to the drive in a ready to install package.
- Variable Torque
- 1 through 250HP (0.18 - 185kW)
- Input voltages of 208V, 240V, 400V, 480V and 600V.
- NEMA Type 1, 12, and 4 Enclosures
Management of labor and material cost is essential in every HVAC installation. The MCH addresses both through aggressive pricing and "Contractor Ready" packaging.
|
 HVAC |
|
Never before has programming a variable frequency inverter been so easy, so convenient, and so fast. The
advantages of the AC Technology Electronic Programming Module (EPM) extend throughout the life of your inverter and beyond. You'll
save time and resources, reduce errors, and increase efficiency. Once you try it, you'll never want to go back to the cumbersome
traditional programming methods again. When you use AC Tech drives that employ EPM technology, you automatically get lot of
benefits.
- Save time
- Eliminate costly, time consuming mistakes
- Streamline production - Prepare the drive anywhere
- Simplify changeovers
- Archive programs
|
 EPM Modules |
|
PositionServo 940/941 Controllers
The PositionServo series of drives have it all. From basic torque and velocity control to fully programmable
coordinated motion, you choose your level of control. As a distributed drive/control solution, avoid all of the costly cables and
connections and put the power of the motion controller in the same package as the drive. With 17 programmable I/O points, machine
control becomes easy with one packaged solution.
Each drive ships with MotionView OnBoard. MotionView is the programming, set-up and diagnostic tool; it is
embedded into the drive and can be called up from any web browser over Ethernet. Communication and networking are handled over
Ethernet as a standard, but the drive can also provide options for EtherNet/IP, DeviceNet, CANopen, PROFIBUS and RS-485
Modbus. The PositionServo can perform along with the most high-level control and drive solutions in the market and can work in
both a centralized or decentralized control scheme.
|
 Model 940 & 941 |
|
As a world-wide specialist in drive and automation technology, Lenze offers products, solutions, systems and
services for mechanical and electronic drives as well as complete automation systems from a single source. Lenze product range
includes frequency inverters, servo drives, drive motors, motors, clutches and brakes, connection technology and automation
solutions, including controllers, industrial PCs, engineering software, visualisation, communication and I/O systems.
Lenze is one of the first specialists in drive technology to integrate safety technology into its drives.
Our services include consultation, engineering, commissioning, plant construction and customer service. We are totally
committed to meeting the wishes and requirements of our customers. Our products can increase the productivity and reliability
of machines and plants. Our international network means that we can be there whenever you need us. This creates trust and is
the key to our success. We invite you to find out more about the world of Lenze.
|
 Lenze Group |
|
AC Technology Corporation is a USA based company specializing in the development, manufacturing and support
of motion control products. Founded in 1983, AC Tech Drives is a member of the Lenze Group - Germany, which provides access to
our products globally through Lenze sales offices and affiliates. AC Tech Drives meets the needs of customers around the world
with a complete line of general purpose variable frequency drives, ranging from fractional horsepower to 250 HP, as well as
offering the SimpleServo line, an innovative amplifier servo inverter. In addition, AC Tech is the USA single-source provider of
the Lenze line of servo automation systems, gear motors, and mechanical components. AC Tech products are not created in a vacuum,
they are developed and manufactured to respond to our customers' challenges, and to help our customers take advantage of their
opportunities.
Lenze Group is proud of a long tradition of solutions focused on addressing our customers'
concerns with efficient and cost-effective solutions. Before they go into production, AC Tech drives have to pass a battery of
tough tests. It's our "reality check". The reason is simple. The purpose of any AC Tech VFD is making customers' product be
better. More cost-effective. Faster. It has to result in our customers' equipment lasting longer. Spending less. Doing more. Being
easier to operate. AC Tech Drives is staffed and managed to support innovation, and to continuously strive towards reaching higher
goals. As our customers constantly advance and push the limits of their technology, so do we. Growth and progress are part of our
daily work. Throughout our efforts, we keep in mind this basic principle, motion control is a means to an end, your end.
AC Technology customers engage in some of the most demanding, competitive applications across the industrial
spectrum the expectations of their suppliers are simple and unforgiving. Reliability must be taken for granted, and responsiveness
is non-negotiable. In summary, these are the unique advantages we offer our customers: A complete line of motion control solutions,
the commitment of a dedicated team, and the power and support of a global organization. Are you interested in working with a
company that understands their customers' priorities, stays in touch with their reality, and knows how to respond to their changing
needs? In that case, AC Technology Corporation has a lot to offer to you. The three main areas of products that AC Technology Corporation offer
include Servos & Automation: We offer complete automation solutions up to 400kW including software, regulating,
controlling, and positioning technology as well as the total range of engineering services, from design and implementation to
start-up and on-site service. When considering servo solutions, check out the SimpleServo offering. This line of torque, velocity
and positioning digital servo drives often out-perform our competitors solutions for a significantly lower investment.
Mechanical Drives & Components: Under the Lenze and Vogel brand, we provide the highest quality,
rugged and versatile mechanical motion control solutions available. AC Tech Drives product line includes precision bevel and
planetary reducers, sub fractional AC and DC motors and Gearmotors, dynamic and static braking components, clutches and
clutch-brake assemblies to name a few. The flagship of our mechanical offering is Lenze G-motion high-performance, low-backlash,
quiet helical and bevel gearmotors and reducers. General Purpose Drives: A complete line of standard, off-the-shelf
variable frequency motor drives, extending from some of the world's smallest and most functional micro drives, with fractional
horsepower, to 250 HP drives. One of the most remarkable advantages of the AC Tech line of drives is the EPM, the Electronic
Programmable Module. This unique feature allows you to duplicate a program in 2 seconds, with the touch of a button. The
advantages of the Electronic Programmable Module (EPM) extend throughout the life of your AC Tech inverter, and even beyond. You'll
be able to stop wasting time and resources, reduce errors, and increase efficiency. Easily archive programs to a PC, perform
job changes without reprogramming, save default parameters for the OEM's machine. Once you try the AC Tech EPM way of
programming your VFD, you'll never want to go back to cumbersome traditional programming again!
Whether we have AC Tech Drives in stock in Boise Idaho or need to ship direct from Lenze to any USA cities; CTi Automation
can get AC Tech Drives to you fast and save you some money! Our industrial factory automation supplies distributors
warehouse stocks some Lenze AC Tech products enabling us to further assist you in finding the correct Lenze Drives in the USA,
Canada, or Mexico. It will be very helpful if you have the AC Tech VFD part numbers ready, then our sales representatives can
provide you with a pricing and availability quote for AC Technology Inverters that you are looking for in seconds. If you do not
have the part numbers for AC Tech VFD Drives, our application engineers will be able to help you figure out the part numbers and
get the price quote to you as soon as possible.
|
|
|
 |
|
|
Can't find a part number?
E-mail Us! |
Danfoss Drives
VLT Micro Drive is a
genuine VLT frequency converter with unsurpassed reliability, user-friendliness, condensed functionality, and extremely easy to
commission. Terminal numbers are named in the same manner as in the rest of the VLT family. Despite the compact size and the easy
commissioning, VLT Micro Drive can be set up to perform perfectly even in complex application set-ups. Approximately 100
parameters can be set to
|
Motortronics VFD
The MT Series drive defines ease of use
for variable speed AC drives and simplifies complex applications with customizable capability. Reliable, expandable and easy to
control, it saves time and money for machine builders, panel builders and system integrators. Excellent motor control algorithm
provides best-in-class torque performance and speed regulation.
|
|
|