|
Welcome to www.ctiautomation.net
CTi Automation is a recognized leader among the largest manufacturers and
distributors in the high-tech motion control and factory automation industry in the Pacific Northwest. Featuring over 20, 000 parts
online, CTi Automation has exactly what you are looking for. Now more than ever CTi Automation is your destination for the
industrial factory automation parts.
 |

 |
Leuze GS 61 & GS 63 Optical Forked Sensors
The new GS61 & GS63 Optical Forked Photoelectric Sensors
complement the successful GSU 14B and IGSU 14B ultrasonic forked sensors to create an outstanding performance portfolio. They are specially designed for
the detection of non-transparent labels and, with their three millimeter wide fork widths, can be used for a wide
range of applications, including the processing of booklets or folded labels. The extremely flat lower fork in
slim-line design enables simple installation directly at the dispensing edge and in installation situations with very
limited space. The GS 61, the world's smallest forked photoelectric sensor for label technology in industrial
quality, offers maximum installation freedom. With very visible markings, both devices enable fast alignment of the
label tape.
|
|
|

 |
Lenze 8400 L-Force Inverter Drives
The new 8400 Frequency Inverter series from Lenze
impresses with consistent scaling. The "Rightsizing" concept with clearly scaled functionality of the BaseLine, StateLine
and HighLine versions simplifies the selection of the suitable inverter for each drive axis - and that with an optimal
price/performance ratio. With an overload capacity of up to 200 percent and a permissible ambient temperature of 45°C
without derating, Lenze 8400 Inverter Drives are robust controllers, which do
not require cooling in the control cabinet even at higher temperatures. This results in savings on the drives,
installation and monitoring. The versions StateLine or higher additionally support thermal control cabinet optimisation
through push-through or cold-plate mounting options.
|
|
From sales to shipping CTi Automation is committed to meeting your requirements for the right product, on time.
Our mission is to be the source most preferred by engineers and buyers to design, prototype, test and manufacture electronics.
CTi Automation is committed to meeting requirements and creating total customer satisfaction with on-time performance, order
accuracy and the highest quality of service. This is accomplished through our commitment to continual improvement of our people,
our suppliers, and our processes.
 |
 |
What is Conductivity?
TURCK's FCMI Flow Meter has a fluid conductivity
spec of 10 micro-Siemens or greater. What does that mean? Conductivity of a fluid is that fluid's ability to carry a charge.
Conductivity is the inverse of resistivity which is sometimes easier to measure. Generally, for a fluid to work with the FCMI
it needs be to conductive and in essence water based. DI-water, ultra pure water, oils, and highly concentrated acids or
bases are not conductive.
What is a micro-Siemen anyway?
1 Seimen = 1/ohm = 1 mho or inverse ohm.
This unit stems from the fact the resisitivity measeured ohms is the inverse of conductivity.
A micro-Siemen is 1/ohm x 10^-6 ( a really little Siemen).
|
Sign up for information about new products, specials, and promotions. |
|
|
|
|
|